spl: mmc: Fix indentation in spl_mmc.c file

[oweals/u-boot.git] / configs / omapl138_lcdk_defconfig

diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index 4106c29c6ee84fa752e87c53d496e6f1d5f1ed05..9821df9884fa51fbf471e09137319f3628f06e4c 100644 (file)
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -11,22 +11,24 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
+CONFIG_SPL_TEXT_BASE=0x80000000
 CONFIG_BOOTDELAY=3
 CONFIG_LOGLEVEL=3
 CONFIG_MISC_INIT_R=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_TEXT_BASE=0x80000000
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CRC32_VERIFY=y
 # CONFIG_CMD_EEPROM is not set
+CONFIG_MX_CYCLIC=y
+CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_GPIO is not set
 CONFIG_CMD_NAND=y
+# CONFIG_CMD_PINMUX is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_DIAG=y
@@ -39,11 +41,14 @@ CONFIG_ENV_IS_IN_NAND=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_DM_MMC=y
 CONFIG_MTD=y
 CONFIG_NAND=y
+CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_DAVINCI=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
@@ -52,7 +57,20 @@ CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_DM_ETH=y
 CONFIG_MII=y
 CONFIG_DRIVER_TI_EMAC=y
+CONFIG_PHY=y
+CONFIG_PHY_DA8XX_USB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_DA8XX=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_DA8XX=y
+CONFIG_USB_MUSB_PIO_ONLY=y
+CONFIG_USB_STORAGE=y
 # CONFIG_SPL_OF_LIBFDT is not set