spi-nor-ids: Add support for Adesto AT25SL321

[oweals/u-boot.git] / configs / m53menlo_defconfig

diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig
index f59f4acabb0ed5eb484086d1366cf7f01984f249..7e5bcf94b90e8308573819f55a4b56ff3754bccd 100644 (file)
--- a/configs/m53menlo_defconfig
+++ b/configs/m53menlo_defconfig
@@ -4,57 +4,90 @@ CONFIG_SYS_TEXT_BASE=0x71000000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_TARGET_M53MENLO=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL=y
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x53FA401C
 # CONFIG_CMD_BMODE is not set
-CONFIG_NR_DRAM_BANKS=2
+CONFIG_SPL_TEXT_BASE=0x70008000
 CONFIG_FIT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/menlo/m53menlo/imximage.cfg"
 CONFIG_BOOTDELAY=1
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttymxc0,115200"
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="run try_bootscript"
 CONFIG_VERSION_VARIABLE=y
+CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND_TRIMFFS=y
+# CONFIG_CMD_PINMUX is not set
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_DATE=y
 CONFIG_CMD_BTRFS=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1m(u-boot),512k(env1),512k(env2),-(ubi)"
 CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx53-m53menlo"
 CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FSL_ESDHC=y
+CONFIG_DM=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC_IMX=y
 CONFIG_NAND=y
+CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_MXC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX5=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_RTC_M41T62=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_MX5=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_VIDEO_IPUV3=y
+CONFIG_IMX_WATCHDOG=y
+CONFIG_WATCHDOG_TIMEOUT_MSECS=8000
 CONFIG_FAT_WRITE=y
-CONFIG_OF_LIBFDT=y