dt-bindings: pinctrl: add i.MXRT1020 pins definition

[oweals/u-boot.git] / configs / ls1046ardb_sdcard_SECURE_BOOT_defconfig

diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 7bf23ad7fd609ef808389d8b0ad5830677f94053..9954e894dacfca363805f47b662e436485781e5f 100644 (file)
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -3,13 +3,15 @@ CONFIG_TARGET_LS1046ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
+CONFIG_ENV_SIZE=0x2000
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL=y
+CONFIG_SPL_TEXT_BASE=0x10000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
@@ -19,7 +21,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 CONFIG_MISC_INIT_R=y
-CONFIG_SPL_TEXT_BASE=0x10000000
+CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
 CONFIG_SPL_CRYPTO_SUPPORT=y
@@ -33,7 +35,6 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
 CONFIG_MP=y
@@ -41,10 +42,12 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.i
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_FSL_ESDHC=y
-CONFIG_SPI_FLASH=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
 # CONFIG_SPI_FLASH_BAR is not set
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
@@ -67,3 +70,5 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y