board: turris_mox: Enable PCI in defconfig
[oweals/u-boot.git] / configs / ls1046aqds_nand_defconfig
index c6b6986f9580f2ab2745567972dab38ce1d03448..b1ecedff1b6cf4991cdae5ad33398f3f2fc187cf 100644 (file)
@@ -4,8 +4,8 @@ CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL"
@@ -14,6 +14,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
 # CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
@@ -33,6 +34,7 @@ CONFIG_CMD_CACHE=y
 CONFIG_MP=y
 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
 CONFIG_FSL_CAAM=y
@@ -40,7 +42,6 @@ CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_PHYLIB=y
-CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y