common: Move mii_init() function out of common.h

[oweals/u-boot.git] / configs / ls1028ardb_tfa_defconfig

diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index 2d0c2b1345a7736abd9fafd963faf1230561d97c..e01bf2e1252e901ae74bb80bfcaf2e212fb26a60 100644 (file)
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -1,13 +1,16 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028ARDB=y
-CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
+CONFIG_SYS_FSL_SDHC_CLK_DIV=1
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x500000
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -19,7 +22,6 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_WDT=y
 # CONFIG_CMD_SETEXPR is not set
@@ -28,29 +30,41 @@ CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-rdb"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_ADDR=0x20500000
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
+CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_ATHEROS=y
+CONFIG_PHY_VITESSE=y
 CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_FSL_ENETC=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y