spi-nor-ids: Add support for Adesto AT25SL321

[oweals/u-boot.git] / configs / imx8qm_mek_defconfig

diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
index aa23b9caa3d7ee56fa21c019c91c48e43cccd10c..747f3ea9f306cc8d7fcfe47d469c455c95ba55d5 100644 (file)
--- a/configs/imx8qm_mek_defconfig
+++ b/configs/imx8qm_mek_defconfig
@@ -3,27 +3,32 @@ CONFIG_SPL_SYS_ICACHE_OFF=y
 CONFIG_SPL_SYS_DCACHE_OFF=y
 CONFIG_ARCH_IMX8=y
 CONFIG_SYS_TEXT_BASE=0x80020000
+CONFIG_SPL_TEXT_BASE=0x100000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg"
 CONFIG_TARGET_IMX8QM_MEK=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8qm_mek/imximage.cfg"
 CONFIG_BOOTDELAY=3
 CONFIG_LOG=y
 CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CPU=y
+# CONFIG_BOOTM_NETBSD is not set
 # CONFIG_CMD_IMPORTENV is not set
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DM=y
@@ -51,7 +56,7 @@ CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_MISC=y
 CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC_IMX=y
+CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_ATHEROS=y