configs: enable eSDHC device module for P4080DS board

[oweals/u-boot.git] / configs / ge_bx50v3_defconfig

diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index 3111451162c1c9c8455ee17d36ab89f44e5ec654..68abf46d7afbe43008f497cd2f8c9cdb6e3ac810 100644 (file)
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -5,7 +5,11 @@ CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
 CONFIG_SYS_VPD_EEPROM_I2C_BUS=4
 CONFIG_SYS_VPD_EEPROM_SIZE=1024
 CONFIG_TARGET_GE_BX50V3=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0xC0000
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
+CONFIG_ENV_SECT_SIZE=0x10000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
 CONFIG_OF_BOARD_SETUP=y
@@ -23,7 +27,6 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT2=y
@@ -34,18 +37,17 @@ CONFIG_DOS_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-bx50v3"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_BOOTCOUNT_EXT=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=10
 CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
-CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_FSL_ESDHC=y
+CONFIG_FSL_USDHC=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_STMICRO=y
@@ -55,10 +57,12 @@ CONFIG_CMD_E1000=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
+CONFIG_PWM_IMX=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
+CONFIG_WATCHDOG_TIMEOUT_MSECS=6000
 CONFIG_IMX_WATCHDOG=y
 # CONFIG_EFI_LOADER is not set