board: ge: store version information in fdt

[oweals/u-boot.git] / configs / ge_bx50v3_defconfig

diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index a937ce3892e7b8df735dbc6766ba28efeda8fc1b..354c61fd6b5668b83bd03a033f192db7c9b4ca73 100644 (file)
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -1,6 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
+CONFIG_SYS_VPD_EEPROM_I2C_BUS=4
+CONFIG_SYS_VPD_EEPROM_SIZE=1024
 CONFIG_TARGET_GE_BX50V3=y
 CONFIG_NR_DRAM_BANKS=1
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
@@ -8,16 +11,8 @@ CONFIG_FIT=y
 CONFIG_BOOTDELAY=1
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-
-# monitor's EEPROM is connected to the bus through the mux channel 1
-# (the number is the offset in CONFIG_SYS_I2C_BUSES)
-CONFIG_SYS_VPD_EEPROM_I2C_BUS=4
-# Address of Atmel 24C08 EEPROM
-CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
-CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1
-CONFIG_SYS_VPD_EEPROM_SIZE=1024
-
 CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_LAST_STAGE_INIT=y
 CONFIG_HUSH_PARSER=y
@@ -43,6 +38,8 @@ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
 CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_E1000=y
@@ -53,3 +50,15 @@ CONFIG_MXC_SPI=y
 CONFIG_IMX_WATCHDOG=y
 CONFIG_OF_LIBFDT=y
 # CONFIG_EFI_LOADER is not set
+CONFIG_DM=y
+CONFIG_CMD_DM=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-bx50v3"
+CONFIG_DM_MMC=y
+CONFIG_BLK=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_OF_BOARD_SETUP=y