dm: spi: Check cs number before accessing slaves

[oweals/u-boot.git] / configs / dra7xx_hs_evm_usb_defconfig

diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig
index 6604953ea4513eed369544addabd23d2e0895326..dc918fd9a994d585169fd8e5c41c05c1a22954f1 100644 (file)
--- a/configs/dra7xx_hs_evm_usb_defconfig
+++ b/configs/dra7xx_hs_evm_usb_defconfig
@@ -4,6 +4,7 @@ CONFIG_TI_SECURE_DEVICE=y
 CONFIG_ISW_ENTRY_ADDR=0x40306d50
 CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_DM_GPIO=y
 CONFIG_OMAP54XX=y
 CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
 CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
@@ -30,7 +31,7 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
-CONFIG_SPL_DMA_SUPPORT=y
+CONFIG_SPL_DMA=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
@@ -40,6 +41,7 @@ CONFIG_SPL_DFU=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_BOOTP_DNS2=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
@@ -69,7 +71,6 @@ CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=1
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_DM_GPIO=y
 CONFIG_PCF8575_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
@@ -80,11 +81,13 @@ CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_SPL_MMC_HS200_SUPPORT=y
 CONFIG_MMC_OMAP_HS=y
+CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=76800000
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_PHY_TI=y
 CONFIG_DM_ETH=y
 CONFIG_PHY_GIGE=y
 CONFIG_MII=y