arm: at91: arm926ejs/u-boot-spl.lds: Add _image_binary_end to SPL lds

[oweals/u-boot.git] / configs / display5_defconfig

diff --git a/configs/display5_defconfig b/configs/display5_defconfig
index db8212ca7cf953636aa9bb1ab6cafc5a0a8c2efe..077a45168a1ddc03ecfa1d4184b1280b5631b20c 100644 (file)
--- a/configs/display5_defconfig
+++ b/configs/display5_defconfig
@@ -4,18 +4,21 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_MX6_DDRCAL=y
 CONFIG_TARGET_DISPLAY5=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6q-display5"
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
 CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_MISC_INIT_R=y
+CONFIG_BOUNCE_BUFFER=y
 CONFIG_SPL_BOOTCOUNT_LIMIT=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SPL_DMA_SUPPORT=y
@@ -24,6 +27,7 @@ CONFIG_SPL_SAVEENV=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="display5 > "
 CONFIG_CMD_BOOTZ=y
@@ -32,6 +36,7 @@ CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PART=y
@@ -48,23 +53,28 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=02008000.spi.1"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=02008000.spi.1:128k(SPL),1m(u-boot),64k(env1),64k(env2),8m(lin-recovery),4m(swu-kernel),8m(swu-initramfs),-(reserved)"
-CONFIG_EFI_PARTITION=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=02008000.spi.1:128k(SPL),1m(u-boot),64k(env1),64k(env2),4m(swu-kernel),16m(swu-initramfs),1m(factory),-(reserved)"
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-display5"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_FSL_ESDHC=y
 CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD_DEVICE=y
 CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
+CONFIG_SF_DEFAULT_BUS=1
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=50000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MARVELL=y
-CONFIG_NETDEVICES=y
 CONFIG_FEC_MXC=y
+CONFIG_MII=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
 CONFIG_MXC_SPI=y
+CONFIG_IMX_WATCHDOG=y