mx6ul_14x14_evk: Avoid overlap of environment over U-Boot proper

[oweals/u-boot.git] / configs / brppt1_spi_defconfig

diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig
index 68d2739176f3308ea86a3ecf2ac39b41e3d57a9c..964b22b100938d061c8a13a09673a08e42f23cf3 100644 (file)
--- a/configs/brppt1_spi_defconfig
+++ b/configs/brppt1_spi_defconfig
@@ -4,14 +4,17 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x20000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
+CONFIG_DM_GPIO=y
 CONFIG_AM33XX=y
 CONFIG_TARGET_BRPPT1=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_OFFSET=0x20000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
-CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_ENV_OFFSET_REDUND=0x30000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 # CONFIG_EXPERT is not set
@@ -37,7 +40,6 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
@@ -51,6 +53,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_BKOPS_ENABLE=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_ITEST is not set
@@ -59,7 +62,6 @@ CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BOOTCOUNT=y
-CONFIG_CMD_BKOPS_ENABLE=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT4=y
@@ -73,7 +75,6 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-spi"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupt-controller interrupt-cells dma-names dmas "
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_OFFSET_REDUND=0x30000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
@@ -81,7 +82,6 @@ CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 # CONFIG_OF_TRANSLATE is not set
 CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_MISC=y