mips: enable support for appending dtb to spl binary

[oweals/u-boot.git] / configs / brppt1_mmc_defconfig

diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig
index 6b0d0242f2ebd5bb94e59543513032deb3b1ee48..59c2e2af9a1588f247750ec47b128342893e1f01 100644 (file)
--- a/configs/brppt1_mmc_defconfig
+++ b/configs/brppt1_mmc_defconfig
@@ -4,19 +4,24 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x40000
+CONFIG_DM_GPIO=y
 CONFIG_AM33XX=y
 CONFIG_TARGET_BRPPT1=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x0
+CONFIG_SPL=y
+CONFIG_ENV_OFFSET_REDUND=0x50000
 # CONFIG_EXPERT is not set
 # CONFIG_FIT is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=0
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run b_default"
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="run cfgscr; run brdefaultip"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
@@ -37,7 +42,6 @@ CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_XIMG is not set
 # CONFIG_CMD_EDITENV is not set
 # CONFIG_CMD_CRC32 is not set
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
@@ -63,13 +67,14 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-mmc"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupt-controller interrupt-cells dma-names dmas "
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 # CONFIG_OF_TRANSLATE is not set
 CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_MISC=y
@@ -84,7 +89,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
-CONFIG_USB_MUSB_DSPS=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_FAT_WRITE=y