apalis_imx6: unify sd/mmc drive strength with linux kernel settings

[oweals/u-boot.git] / configs / at91sam9n12ek_spiflash_defconfig

diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig
index 85c6ff076e14fe9753ea46a7329a2ed38b4709d4..ef8371f29ecdfa500d1951ec635b76e72c4e59ca 100644 (file)
--- a/configs/at91sam9n12ek_spiflash_defconfig
+++ b/configs/at91sam9n12ek_spiflash_defconfig
@@ -1,9 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_AT91SAM9N12EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPI_BOOT=y
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
@@ -13,7 +17,6 @@ CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
@@ -24,7 +27,10 @@ CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs)"
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
 CONFIG_CLK=y
@@ -33,20 +39,20 @@ CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xfffff200
-CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
-CONFIG_ATMEL_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y