efi_loader: parameter checks EFI_FILE_PROTOCOL.SetInfo()

[oweals/u-boot.git] / configs / at91sam9m10g45ek_nandflash_defconfig

diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig
index 45ed49a9c51a03b76ad220a892556d1a8c2429a6..44c50739a04737821b955ce7b4794d14ac4b9079 100644 (file)
--- a/configs/at91sam9m10g45ek_nandflash_defconfig
+++ b/configs/at91sam9m10g45ek_nandflash_defconfig
@@ -1,8 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x73f00000
 CONFIG_TARGET_AT91SAM9M10G45EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -17,7 +21,6 @@ CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
@@ -27,6 +30,7 @@ CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
 CONFIG_CLK=y
@@ -35,15 +39,14 @@ CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xffffee00
-CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_TIMER=y