stm32mp1: activate DFU support and command MTD

[oweals/u-boot.git] / configs / at91sam9263ek_norflash_defconfig

diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig
index e035589582c082b296819372f3b20887a07cb948..5d292c0bb57ea9cccbe23f043128c19dd494d416 100644 (file)
--- a/configs/at91sam9263ek_norflash_defconfig
+++ b/configs/at91sam9263ek_norflash_defconfig
@@ -1,12 +1,15 @@
 CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x21F00000
 CONFIG_TARGET_AT91SAM9263EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NORFLASH"
 CONFIG_BOOTDELAY=3
@@ -21,7 +24,6 @@ CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
@@ -29,7 +31,11 @@ CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
 CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_ENV_ADDR=0x107E0000
+CONFIG_ENV_ADDR_REDUND=0x107D0000
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
@@ -38,10 +44,12 @@ CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_CFI=y
 CONFIG_NAND=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_DM_ETH=y