cmd: Add bind/unbind commands to bind a device to a driver from the command line

[oweals/u-boot.git] / configs / P2020RDB-PC_36BIT_NAND_defconfig

diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig
index b3e140be881e59a3db0291c0a108594a9a59fd9f..3a1382a1805e217a9c7fc88572dbb90677c4f01b 100644 (file)
--- a/configs/P2020RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig
@@ -3,7 +3,7 @@ CONFIG_SYS_TEXT_BASE=0x11001000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL=y
 CONFIG_MPC85xx=y
 # CONFIG_CMD_ERRATA is not set
 CONFIG_TARGET_P2020RDB=y
@@ -13,9 +13,11 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_BOOTDELAY=10
+# CONFIG_MISC_INIT_R is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL=y
+CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
@@ -33,6 +35,7 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_DATE=y
+CONFIG_MP=y
 # CONFIG_CMD_HASH is not set
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
@@ -40,15 +43,19 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=fef000000.nor"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=fef000000.nor:256k(vsc7385-firmware),256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
+CONFIG_MTD_PARTITIONS=y
 CONFIG_NAND=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHYLIB=y
-CONFIG_NETDEVICES=y
+CONFIG_PHY_MARVELL=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_MII=y
+CONFIG_TSEC_ENET=y
 CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y