imx: mx6sabresd: fix splash logo drawing

[oweals/u-boot.git] / configs / P1022DS_36BIT_NAND_defconfig

diff --git a/configs/P1022DS_36BIT_NAND_defconfig b/configs/P1022DS_36BIT_NAND_defconfig
index 7f450ead294b72d029c2fa8948fe6dc0d79fa53f..62072dc7b95cbcd7d77af1a46599fbd31d582e99 100644 (file)
--- a/configs/P1022DS_36BIT_NAND_defconfig
+++ b/configs/P1022DS_36BIT_NAND_defconfig
@@ -3,11 +3,12 @@ CONFIG_SYS_TEXT_BASE=0x11001000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1022DS=y
 CONFIG_PHYS_64BIT=y
+CONFIG_SYS_CUSTOM_LDSCRIPT=y
+CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
@@ -16,6 +17,9 @@ CONFIG_BOOTDELAY=10
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_NAND_BOOT=y
+CONFIG_SPL_TEXT_BASE=0xFF800000
+CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
@@ -33,6 +37,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
+CONFIG_MP=y
 # CONFIG_CMD_HASH is not set
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
@@ -42,12 +47,18 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:48m(ramdisk),14m(diagnostic),2m(
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
 CONFIG_NAND=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_NETDEVICES=y
+CONFIG_PHY_MARVELL=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y