mips: mtmips: change baudrate table for all boards

[oweals/u-boot.git] / configs / P1020RDB-PD_defconfig

diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig
index acce34a039a1c11c6a0271726c4c4a36727723ab..a29f811450f800d5add0b60a4b182db971b12d72 100644 (file)
--- a/configs/P1020RDB-PD_defconfig
+++ b/configs/P1020RDB-PD_defconfig
@@ -3,11 +3,13 @@ CONFIG_SYS_TEXT_BASE=0xEFF40000
 CONFIG_MPC85xx=y
 # CONFIG_CMD_ERRATA is not set
 CONFIG_TARGET_P1020RDB_PD=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_BOOTDELAY=10
+# CONFIG_MISC_INIT_R is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
@@ -27,20 +29,30 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=ec000000.nor"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=ec000000.nor:128k(dtb),6016k(kernel),57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
 CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_DM=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_PARTITIONS=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_MARVELL=y
-CONFIG_NETDEVICES=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_MII=y
 CONFIG_TSEC_ENET=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_FSL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y