phy: meson: add GXBB PHY driver

[oweals/u-boot.git] / configs / P1010RDB-PB_NAND_defconfig

diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig
index bc8dce25d677e0193a03582f42c579538700e449..8378eede02d194d4a23a467fc1b05efd6b2f9300 100644 (file)
--- a/configs/P1010RDB-PB_NAND_defconfig
+++ b/configs/P1010RDB-PB_NAND_defconfig
@@ -1,5 +1,7 @@
 CONFIG_PPC=y
 CONFIG_SYS_TEXT_BASE=0x11001000
+CONFIG_ENV_SIZE=0x4000
+CONFIG_ENV_OFFSET=0x100000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
@@ -7,6 +9,7 @@ CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PB=y
+CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
 CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 CONFIG_FIT=y
@@ -19,7 +22,6 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
@@ -42,13 +44,15 @@ CONFIG_CMD_FAT=y
 CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_FSL_CAAM=y
 CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
-CONFIG_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=10000000