arm: k3: Use driver_name to get ti_sci handle

[oweals/u-boot.git] / configs / P1010RDB-PA_SDCARD_defconfig

diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig
index 1e79e110a30a9a2fcdd374a6604f812ed600263e..628f9008bdd1f091111b0cb89f493e3799d3b684 100644 (file)
--- a/configs/P1010RDB-PA_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_SDCARD_defconfig
@@ -8,6 +8,7 @@ CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PA=y
+CONFIG_SPL_TEXT_BASE=0xD0001000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
@@ -18,6 +19,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MMC_BOOT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
@@ -36,14 +38,22 @@ CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_FSL_CAAM=y
+CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHYLIB=y
-CONFIG_NETDEVICES=y
+CONFIG_PHY_MARVELL=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_MII=y
+CONFIG_TSEC_ENET=y
 CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y