# Be as similar to the output of config.guess/config.sub
# as possible.
-PREFIX=""
-SUFFIX=""
-TEST="false"
-
-# pick up any command line args to config
-for i
-do
-case "$i" in
--d*) PREFIX="debug-";;
--t*) TEST="true";;
--h*) TEST="true"; cat <<EOF
-Usage: config [options]
- -d Add a debug- prefix to machine choice.
- -t Test mode, do not run the Configure perl script.
- -h This help.
-
-Any other text will be passed to the Configure perl script.
-See INSTALL for instructions.
-
-EOF
-;;
-*) options=$options" $i" ;;
-esac
-done
-
# First get uname entries that we use below
MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
echo "whatever-whatever-sco5"; exit 0
;;
4.2MP)
- if [ "x$VERSION" = "x2.1.1" ]; then
+ if [ "x$VERSION" = "x2.01" ]; then
+ echo "${MACHINE}-whatever-unixware201"; exit 0
+ elif [ "x$VERSION" = "x2.02" ]; then
+ echo "${MACHINE}-whatever-unixware202"; exit 0
+ elif [ "x$VERSION" = "x2.03" ]; then
+ echo "${MACHINE}-whatever-unixware203"; exit 0
+ elif [ "x$VERSION" = "x2.1.1" ]; then
echo "${MACHINE}-whatever-unixware211"; exit 0
elif [ "x$VERSION" = "x2.1.2" ]; then
echo "${MACHINE}-whatever-unixware212"; exit 0
+ elif [ "x$VERSION" = "x2.1.3" ]; then
+ echo "${MACHINE}-whatever-unixware213"; exit 0
else
echo "${MACHINE}-whatever-unixware2"; exit 0
fi
echo "m68k-apple-aux3"; exit 0
;;
+ AIX:[3456789]:4:*)
+ echo "${MACHINE}-ibm-aix43"; exit 0
+ ;;
+
+ AIX:*:[56789]:*)
+ echo "${MACHINE}-ibm-aix43"; exit 0
+ ;;
+
AIX:*)
echo "${MACHINE}-ibm-aix"; exit 0
;;
echo "${MACHINE}-whatever-linux1"; exit 0
;;
- GNU*)
- echo "hurd-x86"; exit 0;
- ;;
-
LynxOS:*)
echo "${MACHINE}-lynx-lynxos"; exit 0
;;
echo "ppc-apple-rhapsody"; exit 0
;;
- Darwin:*)
- case "$MACHINE" in
- Power*)
- echo "ppc-apple-darwin${VERSION}"
- ;;
- *)
- echo "i386-apple-darwin${VERSION}"
- ;;
- esac
- exit 0
- ;;
-
SunOS:5.*)
echo "${MACHINE}-whatever-solaris2"; exit 0
;;
# this is where the translation occurs into SSLeay terms
# ---------------------------------------------------------------------------
+PREFIX=""
+SUFFIX=""
+TEST="false"
+
+# pick up any command line args to config
+for i
+do
+case "$i" in
+-d*) PREFIX="debug-";;
+-t*) TEST="true";;
+-h*) TEST="true"; cat <<EOF
+Usage: config [options]
+ -d Add a debug- prefix to machine choice.
+ -t Test mode, do not run the Configure perl script.
+ -h This help.
+
+Any other text will be passed to the Configure perl script.
+See INSTALL for instructions.
+
+EOF
+;;
+*) options=$options" $i" ;;
+esac
+done
+
# figure out if gcc is available and if so we use it otherwise
# we fallback to whatever cc does on the system
GCCVER=`(gcc --version) 2>/dev/null`
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke './Configure irix64-mips4-$CC' *manually*."
echo " Type return if you want to continue, Ctrl-C to abort."
- if [ "$TEST" = "false" ]; then
- read waste < /dev/tty
- fi
+ read waste < /dev/tty
CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
CPU=${CPU:-0}
if [ $CPU -ge 5000 ]; then
esac
fi
;;
- mips-*-linux?)
- cat >dummy.c <<EOF
-#include <stdio.h> /* for printf() prototype */
- int main (argc, argv) int argc; char *argv[]; {
-#ifdef __MIPSEB__
- printf ("linux-%s\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
- printf ("linux-%sel\n", argv[1]);
-#endif
- return 0;
-}
-EOF
- ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
- rm dummy dummy.c
- ;;
+ mips-*-linux?) OUT="linux-mips" ;;
ppc-*-linux2) OUT="linux-ppc" ;;
m68k-*-linux*) OUT="linux-m68k" ;;
ia64-*-linux?) OUT="linux-ia64" ;;
ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
- ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
- i386-apple-darwin*) OUT="darwin-i386-cc" ;;
sparc64-*-linux2)
#Before we can uncomment following lines we have to wait at least
#till 64-bit glibc for SPARC is operational:-(
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
echo " Type return if you want to continue, Ctrl-C to abort."
- if [ "$TEST" = "false" ]; then
- read waste < /dev/tty
- fi
+ read waste < /dev/tty
fi
OUT="solaris-sparcv9-$CC" ;;
sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
*-*-unixware7) OUT="unixware-7" ;;
*-*-UnixWare7) OUT="unixware-7" ;;
*-*-Unixware7) OUT="unixware-7" ;;
- *-*-unixware[1-2]*) OUT="unixware-2.0" ;;
- *-*-UnixWare[1-2]*) OUT="unixware-2.0" ;;
- *-*-Unixware[1-2]*) OUT="unixware-2.0" ;;
+ *-*-unixware20*) OUT="unixware-2.0" ;;
+ *-*-unixware21*) OUT="unixware-2.1" ;;
+ *-*-UnixWare20*) OUT="unixware-2.0" ;;
+ *-*-UnixWare21*) OUT="unixware-2.1" ;;
+ *-*-Unixware20*) OUT="unixware-2.0" ;;
+ *-*-Unixware21*) OUT="unixware-2.1" ;;
BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
*-siemens-sysv4) OUT="SINIX" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
-# NB: This atalla support has been superceded by the ENGINE support
-# That contains its own header and definitions anyway. Support can
-# be enabled or disabled on any supported platform without external
-# headers, eg. by adding the "hw-atalla" switch to ./config or
-# perl Configure
-#
# See whether we can compile Atalla support
-#if [ -f /usr/include/atasi.h ]
-#then
-# options="$options -DATALLA"
-#fi
+if [ -f /usr/include/atasi.h ]
+then
+ options="$options -DATALLA"
+fi
# gcc < 2.8 does not support -mcpu=ultrasparc
if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
fi
done
-# Discover Kerberos 5 (since it's still a prototype, we don't
-# do any guesses yet, that's why this section is commented away.
-#if [ -d /usr/kerberos ]; then
-# krb5_dir=/usr/kerberos
-# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
-# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
-# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
-# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
-# -a \( -f $krb5_dir/include/krb5.h \) ]; then
-# options="$options --with-krb5-flavor=MIT"
-# fi
-#elif [ -d /usr/heimdal ]; then
-# krb5_dir=/usr/heimdal
-# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
-# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
-# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
-# -a \( -f $krb5_dir/include/krb5.h \) ]; then
-# options="$options --with-krb5-flavor=Heimdal"
-# fi
-#fi
-
if [ -z "$OUT" ]; then
OUT="$CC"
fi