# Be as similar to the output of config.guess/config.sub
# as possible.
-PREFIX=""
SUFFIX=""
TEST="false"
EXE=""
+THERE=`dirname $0`
# pick up any command line args to config
for i
do
case "$i" in
--d*) PREFIX="debug-";;
+-d*) options=$options" --debug";;
-t*) TEST="true";;
-h*) TEST="true"; cat <<EOF
Usage: config [options]
# First get uname entries that we use below
-MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
-RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
-SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
-VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
+[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
+[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
+[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
# Now test for ISC and SCO, since it is has a braindamaged uname.
# Now we simply scan though... In most cases, the SYSTEM info is enough
#
case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
- MPE/iX:*)
- MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
- echo "parisc-hp-MPE/iX"; exit 0
- ;;
A/UX:*)
echo "m68k-apple-aux3"; exit 0
;;
echo "${MACHINE}-ibm-aix3"; exit 0
;;
- BeOS:*:BePC)
- if [ -e /boot/develop/headers/be/bone ]; then
- echo "beos-x86-bone"; exit 0
- else
- echo "beos-x86-r5"; exit 0
- fi
- ;;
-
- dgux:*)
- echo "${MACHINE}-dg-dgux"; exit 0
- ;;
-
HI-UX:*)
echo "${MACHINE}-hi-hiux"; exit 0
;;
echo "ppc-apple-darwin${VERSION}"
;;
*)
- echo "i386-apple-darwin${VERSION}"
+ echo "i686-apple-darwin${VERSION}"
;;
esac
exit 0
echo "${MACHINE}-unknown-ultrix"; exit 0
;;
- SINIX*|ReliantUNIX*)
- echo "${MACHINE}-siemens-sysv4"; exit 0
- ;;
-
POSIX-BC*)
echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
;;
echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
;;
- NEWS-OS:4.*)
- echo "mips-sony-newsos4"; exit 0;
- ;;
-
MINGW*)
echo "${MACHINE}-whatever-mingw"; exit 0;
;;
CYGWIN*)
- case "$RELEASE" in
- [bB]*|1.0|1.[12].*)
- echo "${MACHINE}-whatever-cygwin_pre1.3"
- ;;
- *)
- echo "${MACHINE}-whatever-cygwin"
- ;;
- esac
- exit 0
+ echo "${MACHINE}-pc-cygwin"; exit 0
;;
- *"CRAY T3E")
- echo "t3e-cray-unicosmk"; exit 0;
- ;;
-
- *CRAY*)
- echo "j90-cray-unicos"; exit 0;
- ;;
-
- NONSTOP_KERNEL*)
- echo "nsr-tandem-nsk"; exit 0;
+ vxworks*)
+ echo "${MACHINE}-whatever-vxworks"; exit 0;
;;
esac
#
# Do the Apollo stuff first. Here, we just simply assume
-# that the existance of the /usr/apollo directory is proof
+# that the existence of the /usr/apollo directory is proof
# enough
if [ -d /usr/apollo ]; then
echo "whatever-apollo-whatever"
# this is where the translation occurs into SSLeay terms
# ---------------------------------------------------------------------------
-# figure out if gcc is available and if so we use it otherwise
-# we fallback to whatever cc does on the system
-GCCVER=`(gcc -dumpversion) 2>/dev/null`
-if [ "$GCCVER" != "" ]; then
- CC=gcc
- # then strip off whatever prefix egcs prepends the number with...
- # Hopefully, this will work for any future prefixes as well.
- GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
- # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
- # does give us what we want though, so we use that. We just just the
- # major and minor version numbers.
- # peak single digit before and after first dot, e.g. 2.95.1 gives 29
- GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
-else
- CC=cc
+# Only set CC if not supplied already
+if [ -z "$CROSS_COMPILE$CC" ]; then
+ GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null`
+ if [ "$GCCVER" != "" ]; then
+ # then strip off whatever prefix egcs prepends the number with...
+ # Hopefully, this will work for any future prefixes as well.
+ GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
+ # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
+ # does give us what we want though, so we use that. We just just the
+ # major and minor version numbers.
+ # peak single digit before and after first dot, e.g. 2.95.1 gives 29
+ GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
+ CC=gcc
+ else
+ CC=cc
+ fi
fi
GCCVER=${GCCVER:-0}
if [ "$SYSTEM" = "HP-UX" ];then
# script above so we end up with values in vars but that would take
# more time that I want to waste at the moment
case "$GUESSOS" in
+ uClinux*64*)
+ OUT=uClinux-dist64
+ ;;
+ uClinux*)
+ OUT=uClinux-dist
+ ;;
mips2-sgi-irix)
CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
CPU=${CPU:-0}
;;
mips4-sgi-irix64)
echo "WARNING! If you wish to build 64-bit library, then you have to"
- echo " invoke './Configure irix64-mips4-$CC' *manually*."
+ echo " invoke '$THERE/Configure irix64-mips4-$CC' *manually*."
if [ "$TEST" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
OUT="irix-mips3-$CC"
;;
ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
- ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
- i386-apple-darwin*) OUT="darwin-i386-cc" ;;
+ ppc-apple-darwin*)
+ ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
+ if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke '$THERE/Configure darwin64-ppc-cc' *manually*."
+ if [ "$TEST" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ fi
+ if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
+ OUT="darwin64-ppc-cc"
+ else
+ OUT="darwin-ppc-cc"
+ fi ;;
+ i?86-apple-darwin*)
+ ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
+ if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke '$THERE/Configure darwin64-x86_64-cc $options' *manually*."
+ if [ "$TEST" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ # The stty technique used elsewhere doesn't work on
+ # MacOS. At least, right now on this Mac.
+ sleep 5
+ fi
+ fi
+ if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
+ OUT="darwin64-x86_64-cc"
+ else
+ OUT="darwin-i386-cc"
+ fi ;;
+ armv6+7-*-iphoneos)
+ options="$options -arch%20armv6 -arch%20armv7"
+ OUT="iphoneos-cross" ;;
+ *-*-iphoneos)
+ options="$options -arch%20${MACHINE}"
+ OUT="iphoneos-cross" ;;
+ arm64-*-iphoneos|*-*-ios64)
+ OUT="ios64-cross" ;;
alpha-*-linux2)
ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
case ${ISA:-generic} in
fi
;;
ppc64-*-linux2)
+ if [ -z "$KERNEL_BITS" ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke '$THERE/Configure linux-ppc64' *manually*."
+ if [ "$TEST" = "false" -a -t 1 ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ fi
+ fi
+ if [ "$KERNEL_BITS" = "64" ]; then
+ OUT="linux-ppc64"
+ else
+ OUT="linux-ppc"
+ (echo "__LP64__" | gcc -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null) || options="$options -m32"
+ fi
+ ;;
+ ppc64le-*-linux2) OUT="linux-ppc64le" ;;
+ ppc-*-linux2) OUT="linux-ppc" ;;
+ mips64*-*-linux2)
echo "WARNING! If you wish to build 64-bit library, then you have to"
- echo " invoke './Configure linux-ppc64' *manually*."
+ echo " invoke '$THERE/Configure linux64-mips64' *manually*."
if [ "$TEST" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
- OUT="linux-ppc"
- ;;
- ppc-*-linux2) OUT="linux-ppc" ;;
+ OUT="linux-mips64"
+ ;;
+ mips*-*-linux2) OUT="linux-mips32" ;;
+ ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
+ ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
+ pentium-*-vxworks*) OUT="vxworks-pentium" ;;
+ simlinux-*-vxworks*) OUT="vxworks-simlinux" ;;
+ mips-*-vxworks*) OUT="vxworks-mips";;
ia64-*-linux?) OUT="linux-ia64" ;;
sparc64-*-linux2)
echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
echo " and wish to build 64-bit library, then you have to"
- echo " invoke './Configure linux64-sparcv9' *manually*."
+ echo " invoke '$THERE/Configure linux64-sparcv9' *manually*."
if [ "$TEST" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
OUT="linux-generic32" ;;
- arm*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
- arm*l-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
+ armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
+ armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
+ arm*-*-linux2) OUT="linux-armv4" ;;
+ aarch64-*-linux2) OUT="linux-aarch64" ;;
sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
- s390x-*-linux2) OUT="linux-s390x" ;;
+ s390x-*-linux2)
+ # To be uncommented when glibc bug is fixed, see Configure...
+ #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
+ # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
+ # echo " have to invoke './Configure linux32-s390x' *manually*."
+ # if [ "$TEST" = "false" -a -t -1 ]; then
+ # echo " You have about 5 seconds to press Ctrl-C to abort."
+ # (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
+ # fi
+ #fi
+ OUT="linux64-s390x"
+ ;;
x86_64-*-linux?) OUT="linux-x86_64" ;;
*86-*-linux2) OUT="linux-elf"
if [ "$GCCVER" -gt 28 ]; then
*-*-linux2) OUT="linux-generic32" ;;
sun4[uv]*-*-solaris2)
OUT="solaris-sparcv9-$CC"
- ISA64=`(isalist) 2>/dev/null | grep sparcv9`
- if [ "$ISA64" != "" ]; then
+ ISA64=`(isainfo) 2>/dev/null | grep sparcv9`
+ if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then
if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
echo "WARNING! If you wish to build 64-bit library, then you have to"
- echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
+ echo " invoke '$THERE/Configure solaris64-sparcv9-cc' *manually*."
if [ "$TEST" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
# and therefore switch over to 64-bit. <appro>
OUT="solaris64-sparcv9-gcc"
echo "WARNING! If you wish to build 32-bit library, then you have to"
- echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
+ echo " invoke '$THERE/Configure solaris-sparcv9-gcc' *manually*."
if [ "$TEST" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
elif [ "$GCC_ARCH" = "-m32" ]; then
echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
echo " and wish to build 64-bit library, then you have to"
- echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
+ echo " invoke '$THERE/Configure solaris64-sparcv9-gcc' *manually*."
if [ "$TEST" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
fi
fi
+ if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then
+ OUT="solaris64-sparcv9-$CC"
+ fi
;;
sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
*86*-*-solaris2)
- ISA64=`(isalist) 2>/dev/null | grep amd64`
- if [ "$ISA64" != "" ]; then
+ ISA64=`(isainfo) 2>/dev/null | grep amd64`
+ if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then
OUT="solaris64-x86_64-$CC"
else
OUT="solaris-x86-$CC"
*-*-sunos4) OUT="sunos-$CC" ;;
*86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
- alpha*-*-*bsd*) OUT="BSD-generic64; options="$options -DL_ENDIAN" ;;
- powerpc64-*-*bsd*) OUT="BSD-generic64; options="$options -DB_ENDIAN" ;;
+ alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
+ powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
sparc64-*-*bsd*) OUT="BSD-sparc64" ;;
ia64-*-*bsd*) OUT="BSD-ia64" ;;
amd64-*-*bsd*) OUT="BSD-x86_64" ;;
libc=/usr/lib/libc.so
else # OpenBSD
# ld searches for highest libc.so.* and so do we
- libc=`(ls /usr/lib/libc.so.* | tail -1) 2>/dev/null`
+ libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null`
fi
case "`(file -L $libc) 2>/dev/null`" in
*ELF*) OUT="BSD-x86-elf" ;;
EXE=".pm"
OUT="vos-$CC" ;;
BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
- RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
- *-siemens-sysv4) OUT="SINIX" ;;
*-hpux1*)
if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
OUT="hpux64-parisc2-gcc"
fi
- KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+ [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
KERNEL_BITS=${KERNEL_BITS:-32}
CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
CPU_VERSION=${CPU_VERSION:-0}
# See <sys/unistd.h> for further info on CPU_VERSION.
if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
- echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
- echo " If you wish to build 32-bit library, the you have to"
- echo " invoke './Configure hpux-ia64-cc' *manually*."
- if [ "$TEST" = "false" -a -t 1 ]; then
- echo " You have about 5 seconds to press Ctrl-C to abort."
- (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
- fi
- OUT="hpux64-ia64-cc"
+ if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+ OUT="hpux64-ia64-cc"
+ else
+ OUT="hpux-ia64-cc"
+ fi
elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
OUT=${OUT:-"hpux-parisc2-${CC}"}
if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
echo "WARNING! If you wish to build 64-bit library then you have to"
- echo " invoke './Configure hpux64-parisc2-cc' *manually*."
+ echo " invoke '$THERE/Configure hpux64-parisc2-cc' *manually*."
if [ "$TEST" = "false" -a -t 1 ]; then
echo " You have about 5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
options="$options -D_REENTRANT" ;;
*-hpux) OUT="hpux-parisc-$CC" ;;
*-aix)
- KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
+ [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
KERNEL_BITS=${KERNEL_BITS:-32}
OBJECT_MODE=${OBJECT_MODE:-32}
if [ "$CC" = "gcc" ]; then
OUT="aix-gcc"
+ if [ $OBJECT_MODE -eq 64 ]; then
+ echo 'Your $OBJECT_MODE was found to be set to 64'
+ OUT="aix64-gcc"
+ fi
elif [ $OBJECT_MODE -eq 64 ]; then
echo 'Your $OBJECT_MODE was found to be set to 64'
OUT="aix64-cc"
OUT="aix-cc"
if [ $KERNEL_BITS -eq 64 ]; then
echo "WARNING! If you wish to build 64-bit kit, then you have to"
- echo " invoke './Configure aix64-cc' *manually*."
+ echo " invoke '$THERE/Configure aix64-cc' *manually*."
if [ "$TEST" = "false" -a -t 1 ]; then
echo " You have ~5 seconds to press Ctrl-C to abort."
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
fi
;;
# these are all covered by the catchall below
- # *-dgux) OUT="dgux" ;;
- mips-sony-newsos4) OUT="newsos4-gcc" ;;
- *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
- *-*-cygwin) OUT="Cygwin" ;;
- t3e-cray-unicosmk) OUT="cray-t3e" ;;
- j90-cray-unicos) OUT="cray-j90" ;;
- nsr-tandem-nsk) OUT="tandem-c89" ;;
- beos-*) OUT="$GUESSOS" ;;
+ i[3456]86-*-cygwin) OUT="Cygwin-x86" ;;
+ *-*-cygwin) OUT="Cygwin-${MACHINE}" ;;
+ x86pc-*-qnx6) OUT="QNX6-i386" ;;
+ *-*-qnx6) OUT="QNX6" ;;
+ x86-*-android|i?86-*-android) OUT="android-x86" ;;
+ armv[7-9]*-*-android)
+ OUT="android-armeabi"; options="$options -march=armv7-a" ;;
+ arm*-*-android) OUT="android-armeabi" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
-# NB: This atalla support has been superceded by the ENGINE support
+# NB: This atalla support has been superseded by the ENGINE support
# That contains its own header and definitions anyway. Support can
# be enabled or disabled on any supported platform without external
# headers, eg. by adding the "hw-atalla" switch to ./config or
# options="$options -DATALLA"
#fi
+if [ -n "$CONFIG_OPTIONS" ]; then
+ options="$options $CONFIG_OPTIONS"
+fi
+
+if expr "$options" : '.*no\-asm' > /dev/null; then :; else
+ sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \
+ grep \\--noexecstack >/dev/null && \
+ options="$options -Wa,--noexecstack"
+fi
+
# gcc < 2.8 does not support -march=ultrasparc
if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
then
for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
do
- if [ ! -d crypto/$i ]
+ if [ ! -d $THERE/crypto/$i ]
then
options="$options no-$i"
fi
done
-# Discover Kerberos 5 (since it's still a prototype, we don't
-# do any guesses yet, that's why this section is commented away.
-#if [ -d /usr/kerberos ]; then
-# krb5_dir=/usr/kerberos
-# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
-# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
-# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
-# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
-# -a \( -f $krb5_dir/include/krb5.h \) ]; then
-# options="$options --with-krb5-flavor=MIT"
-# fi
-#elif [ -d /usr/heimdal ]; then
-# krb5_dir=/usr/heimdal
-# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
-# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
-# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
-# -a \( -f $krb5_dir/include/krb5.h \) ]; then
-# options="$options --with-krb5-flavor=Heimdal"
-# fi
-#fi
-
if [ -z "$OUT" ]; then
OUT="$CC"
fi
# compiler for the platform ... in which case we add it on
# the end ... otherwise we leave it off
-$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
+$PERL $THERE/Configure LIST | grep "$OUT-$CC" > /dev/null
if [ $? = "0" ]; then
OUT="$OUT-$CC"
fi
-OUT="$PREFIX$OUT"
+OUT="$OUT"
-$PERL ./Configure LIST | grep "$OUT" > /dev/null
+$PERL $THERE/Configure LIST | grep "$OUT" > /dev/null
if [ $? = "0" ]; then
echo Configuring for $OUT
if [ "$TEST" = "true" ]; then
- echo $PERL ./Configure $OUT $options
+ echo $PERL $THERE/Configure $OUT $options
else
- $PERL ./Configure $OUT $options
+ $PERL $THERE/Configure $OUT $options
fi
else
echo "This system ($OUT) is not supported. See file INSTALL for details."