# Be as similar to the output of config.guess/config.sub
# as possible.
+PREFIX=""
+SUFFIX=""
+TEST="false"
+
+# pick up any command line args to config
+for i
+do
+case "$i" in
+-d*) PREFIX="debug-";;
+-t*) TEST="true";;
+-h*) TEST="true"; cat <<EOF
+Usage: config [options]
+ -d Add a debug- prefix to machine choice.
+ -t Test mode, do not run the Configure perl script.
+ -h This help.
+
+Any other text will be passed to the Configure perl script.
+See INSTALL for instructions.
+
+EOF
+;;
+*) options=$options" $i" ;;
+esac
+done
+
# First get uname entries that we use below
MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
+
# Now test for ISC and SCO, since it is has a braindamaged uname.
#
# We need to work around FreeBSD 1.1.5.1
echo "whatever-whatever-sco5"; exit 0
;;
4.2MP)
- if [ "x$VERSION" = "x2.1.1" ]; then
- echo "${MACHINE}-whatever-unixware211"; exit 0
- else
- echo "${MACHINE}-whatever-unixware2"; exit 0
- fi
+ case "x${VERSION}" in
+ x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
+ x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
+ x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
+ esac
;;
4.2)
echo "whatever-whatever-unixware1"; exit 0
;;
+ 5)
+ case "x${VERSION}" in
+ # We hardcode i586 in place of ${MACHINE} for the
+ # following reason. The catch is that even though Pentium
+ # is minimum requirement for platforms in question,
+ # ${MACHINE} gets always assigned to i386. Now, problem
+ # with i386 is that it makes ./config pass 386 to
+ # ./Configure, which in turn makes make generate
+ # inefficient SHA-1 (for this moment) code.
+ x7*) echo "i586-sco-unixware7"; exit 0 ;;
+ x8*) echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
+ esac
+ ;;
esac
fi
fi
# Now we simply scan though... In most cases, the SYSTEM info is enough
#
case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
+ MPE/iX:*)
+ MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
+ echo "parisc-hp-MPE/iX"; exit 0
+ ;;
A/UX:*)
echo "m68k-apple-aux3"; exit 0
;;
+ AIX:[3456789]:4:*)
+ echo "${MACHINE}-ibm-aix43"; exit 0
+ ;;
+
+ AIX:*:[56789]:*)
+ echo "${MACHINE}-ibm-aix43"; exit 0
+ ;;
+
AIX:*)
echo "${MACHINE}-ibm-aix"; exit 0
;;
HP-UX:*)
HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "$HPUXVER" in
- 11.*)
- echo "${MACHINE}-hp-hpux11"; exit 0
- ;;
- 10.*)
- echo "${MACHINE}-hp-hpux10"; exit 0
+ 1[0-9].*) # HPUX 10 and 11 targets are unified
+ echo "${MACHINE}-hp-hpux1x"; exit 0
;;
*)
echo "${MACHINE}-hp-hpux"; exit 0
echo "mips2-sgi-irix"; exit 0
;;
- IRIX:6.*)
+ IRIX:6.*)
echo "mips3-sgi-irix"; exit 0
;;
echo "${MACHINE}-whatever-linux1"; exit 0
;;
+ GNU*)
+ echo "hurd-x86"; exit 0;
+ ;;
+
LynxOS:*)
echo "${MACHINE}-lynx-lynxos"; exit 0
;;
;;
FreeBSD:*:*:*386*)
- case `sysctl -n hw.model` in
- Pentium*)
- echo "i586-whatever-freebsd"; exit 0
- ;;
- *)
- echo "i386-whatever-freebsd"; exit 0
- ;;
- esac;
- ;;
+ VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
+ MACH=`sysctl -n hw.model`
+ ARCH='whatever'
+ case ${MACH} in
+ *386* ) MACH="i386" ;;
+ *486* ) MACH="i486" ;;
+ Pentium\ II*) MACH="i686" ;;
+ Pentium* ) MACH="i586" ;;
+ * ) MACH="$MACHINE" ;;
+ esac
+ case ${MACH} in
+ i[0-9]86 ) ARCH="pc" ;;
+ esac
+ echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
+ ;;
FreeBSD:*)
echo "${MACHINE}-whatever-freebsd"; exit 0
;;
NetBSD:*:*:*386*)
- echo "`sysctl -n hw.model | sed 's,.*\(.\)86-class.*,i\186,'`-whateve\r-netbsd"; exit 0
+ echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
;;
NetBSD:*)
echo "${MACHINE}-whatever-openbsd"; exit 0
;;
+ OpenUNIX:*)
+ echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+ ;;
+
OSF1:*:*:*alpha*)
- echo "${MACHINE}-dec-osf"; exit 0
+ OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
+ case "$OSFMAJOR" in
+ 4|5)
+ echo "${MACHINE}-dec-tru64"; exit 0
+ ;;
+ 1|2|3)
+ echo "${MACHINE}-dec-osf"; exit 0
+ ;;
+ *)
+ echo "${MACHINE}-dec-osf"; exit 0
+ ;;
+ esac
;;
QNX:*)
- case "$VERSION" in
- 423)
- echo "${MACHINE}-qssl-qnx32"
+ case "$RELEASE" in
+ 4*)
+ echo "${MACHINE}-whatever-qnx4"
+ ;;
+ 6*)
+ echo "${MACHINE}-whatever-qnx6"
;;
*)
- echo "${MACHINE}-qssl-qnx"
+ echo "${MACHINE}-whatever-qnx"
;;
esac
exit 0
echo "i860-intel-osf1"; exit 0
;;
+ Rhapsody:*)
+ echo "ppc-apple-rhapsody"; exit 0
+ ;;
+
+ Darwin:*)
+ case "$MACHINE" in
+ Power*)
+ echo "ppc-apple-darwin${VERSION}"
+ ;;
+ *)
+ echo "i386-apple-darwin${VERSION}"
+ ;;
+ esac
+ exit 0
+ ;;
+
SunOS:5.*)
- echo "${MACHINE}-sun-solaris2"; exit 0
+ echo "${MACHINE}-whatever-solaris2"; exit 0
;;
SunOS:*)
echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
;;
+ NEWS-OS:4.*)
+ echo "mips-sony-newsos4"; exit 0;
+ ;;
+
+ CYGWIN*)
+ case "$RELEASE" in
+ [bB]*|1.0|1.[12].*)
+ echo "${MACHINE}-whatever-cygwin_pre1.3"
+ ;;
+ *)
+ echo "${MACHINE}-whatever-cygwin"
+ ;;
+ esac
+ exit 0
+ ;;
+
+ *"CRAY T3E")
+ echo "t3e-cray-unicosmk"; exit 0;
+ ;;
+
+ *CRAY*)
+ echo "j90-cray-unicos"; exit 0;
+ ;;
+
+ NONSTOP_KERNEL*)
+ echo "nsr-tandem-nsk"; exit 0;
+ ;;
esac
#
# this is where the translation occurs into SSLeay terms
# ---------------------------------------------------------------------------
-PREFIX=""
-SUFFIX=""
-TEST="false"
-
-# pick up any command line args to config
-for i
-do
-case "$i" in
--d*) PREFIX="debug-";;
--t*) TEST="true";;
--h*) TEST="true"; cat <<EOF
-Usage: config [options]
- -d Add a debug- prefix to machine choice.
- -t Test mode, do not run the Configure perl script.
- -h This help.
-
-Any other text will be passed to the Configure perl script.
-See INSTALL for instructions.
-
-EOF
-;;
-*) options=$options" $i" ;;
-esac
-done
-
# figure out if gcc is available and if so we use it otherwise
# we fallback to whatever cc does on the system
-GCCVER=`(gcc --version) 2>/dev/null`
+GCCVER=`(gcc -dumpversion) 2>/dev/null`
if [ "$GCCVER" != "" ]; then
CC=gcc
- # then strip off whatever prefix Cygnus prepends the number with...
- GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
- # peak only digits before and after first dot, e.g. 2.95.1 gives 29
+ # then strip off whatever prefix egcs prepends the number with...
+ # Hopefully, this will work for any future prefixes as well.
+ GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
+ # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
+ # does give us what we want though, so we use that. We just just the
+ # major and minor version numbers.
+ # peak single digit before and after first dot, e.g. 2.95.1 gives 29
GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
else
CC=cc
- if [ "$SYSTEM" = "SunOS" ]
- then
- case `cc -V 2>&1` in
- *4*) CC=cc;;
- *5*) CC=cc;;
- *) CC=sc3;;
- esac
+fi
+GCCVER=${GCCVER:-0}
+if [ "$SYSTEM" = "HP-UX" ];then
+ # By default gcc is a ILP32 compiler (with long long == 64).
+ GCC_BITS="32"
+ if [ $GCCVER -ge 30 ]; then
+ # PA64 support only came in with gcc 3.0.x.
+ # We check if the preprocessor symbol __LP64__ is defined...
+ if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
+ : # __LP64__ has slipped through, it therefore is not defined
+ else
+ GCC_BITS="64"
+ fi
+ fi
+fi
+if [ "$SYSTEM" = "SunOS" ]; then
+ if [ $GCCVER -ge 30 ]; then
+ # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
+ # to be working, at the very least 'make test' passes...
+ if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
+ GCC_ARCH="-m64"
+ else
+ GCC_ARCH="-m32"
+ fi
+ fi
+ # check for WorkShop C, expected output is "cc: blah-blah C x.x"
+ CCVER=`(cc -V 2>&1) 2>/dev/null | \
+ egrep -e '^cc: .* C [0-9]\.[0-9]' | \
+ sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
+ CCVER=${CCVER:-0}
+ if [ $CCVER -gt 40 ]; then
+ CC=cc # overrides gcc!!!
+ if [ $CCVER -eq 50 ]; then
+ echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
+ echo " patch #107357-01 or later applied."
+ sleep 5
+ fi
+ elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
+ CC=sc3
fi
fi
-GCCVER=${GCCVER:-0}
+if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
+ # check for Compaq C, expected output is "blah-blah C Vx.x"
+ CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
+ egrep -e '.* C V[0-9]\.[0-9]' | \
+ sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
+ CCCVER=${CCCVER:-0}
+ if [ $CCCVER -gt 60 ]; then
+ CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
+ # only on hash routines and des, otherwise gcc (2.95)
+ # keeps along rather tight...
+ fi
+fi
+
+if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
+ (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
+fi
+
CCVER=${CCVER:-0}
# read the output of the embedded GuessOS
# script above so we end up with values in vars but that would take
# more time that I want to waste at the moment
case "$GUESSOS" in
- alpha-*-linux2) OUT="alpha-gcc" ;;
- ppc-*-linux2) OUT="linux-ppc" ;;
- mips-*-linux?) OUT="linux-mips" ;;
mips2-sgi-irix)
- CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
CPU=${CPU:-0}
if [ $CPU -ge 4000 ]; then
options="$options -mips2"
OUT="irix-$CC"
;;
mips3-sgi-irix)
- CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
CPU=${CPU:-0}
if [ $CPU -ge 5000 ]; then
options="$options -mips4"
;;
mips4-sgi-irix64)
echo "WARNING! If you wish to build 64-bit library, then you have to"
- echo " invoke './Configre irix64-mips4-$CC' *manually*."
- echo " Type Ctrl-C if you don't want to continue."
- read waste < /dev/tty
- options="$options -mips4"
+ echo " invoke './Configure irix64-mips4-$CC' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ CPU=${CPU:-0}
+ if [ $CPU -ge 5000 ]; then
+ options="$options -mips4"
+ else
+ options="$options -mips3"
+ fi
OUT="irix-mips3-$CC"
;;
+ alpha-*-linux2)
+ ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo`
+ case ${ISA:-generic} in
+ *[67]) OUT="linux-alpha+bwx-$CC" ;;
+ *) OUT="linux-alpha-$CC" ;;
+ esac
+ if [ "$CC" = "gcc" ]; then
+ case ${ISA:-generic} in
+ EV5|EV45) options="$options -mcpu=ev5";;
+ EV56|PCA56) options="$options -mcpu=ev56";;
+ EV6|EV67|PCA57) options="$options -mcpu=ev6";;
+ esac
+ fi
+ ;;
+ mips-*-linux?)
+ cat >dummy.c <<EOF
+#include <stdio.h> /* for printf() prototype */
+ int main (argc, argv) int argc; char *argv[]; {
+#ifdef __MIPSEB__
+ printf ("linux-%s\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+ printf ("linux-%sel\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
+ rm dummy dummy.c
+ ;;
+ ppc64-*-linux2)
+ #Use the standard target for PPC architecture until we create a
+ #special one for the 64bit architecture.
+ OUT="linux-ppc" ;;
+ ppc-*-linux2) OUT="linux-ppc" ;;
+ m68k-*-linux*) OUT="linux-m68k" ;;
+ ia64-*-linux?) OUT="linux-ia64" ;;
+ ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
+ ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
+ i386-apple-darwin*) OUT="darwin-i386-cc" ;;
sparc64-*-linux2)
- #Before we uncomment following line we have to wait at least till
- #64-bit glibc for SPARC is available:-(
- #echo "WARNING! If you wish to build 64-bit library, then you have to"
- #echo " invoke './Configure linux64-sparcv9' *manually*."
- #echo " Type Ctrl-C if you don't want to continue."
- #read waste < /dev/tty
+ echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
+ echo " and wish to build 64-bit library, then you have to"
+ echo " invoke './Configure linux64-sparcv9' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
OUT="linux-sparcv9" ;;
sparc-*-linux2)
- KARCH=`awk '/type/{print$3}' /proc/cpuinfo`
+ KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
case ${KARCH:-sun4} in
sun4u*) OUT="linux-sparcv9" ;;
sun4m) OUT="linux-sparcv8" ;;
sun4d) OUT="linux-sparcv8" ;;
*) OUT="linux-sparcv7" ;;
esac ;;
- *-*-linux2) OUT="linux-elf" ;;
+ parisc-*-linux2)
+ CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
+ CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
+
+ # ??TODO ?? Model transformations
+ # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
+ # assuming no further arch. identification will ever be used by GCC.
+ # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
+ # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
+ # for these chips in the future.
+ # PA7300LC -> 7100LC (1.1)
+ # PA8200 -> 8000 (2.0)
+ # PA8500 -> 8000 (2.0)
+ # PA8600 -> 8000 (2.0)
+
+ CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
+ # Finish Model transformations
+
+ options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
+ OUT="linux-parisc" ;;
+ arm*-*-linux2) OUT="linux-elf-arm" ;;
+ s390-*-linux2) OUT="linux-s390" ;;
+ s390x-*-linux?) OUT="linux-s390x" ;;
+ x86_64-*-linux?) OUT="linux-x86_64" ;;
+ *-*-linux2) OUT="linux-elf"
+ if [ "$GCCVER" -gt 28 ]; then
+ if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
+ OUT="linux-pentium"
+ fi
+ if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
+ OUT="linux-ppro"
+ fi
+ if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
+ OUT="linux-k6"
+ fi
+ fi ;;
*-*-linux1) OUT="linux-aout" ;;
- sun4u-sun-solaris2) OUT="solaris-usparc-$CC" ;;
- sun4*-sun-solaris2) OUT="solaris-sparc-$CC" ;;
- *86*-sun-solaris2) OUT="solaris-x86-$CC" ;;
+ sun4u*-*-solaris2)
+ OUT="solaris-sparcv9-$CC"
+ ISA64=`(isalist) 2>/dev/null | grep sparcv9`
+ if [ "$ISA64" != "" ]; then
+ if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
+ # $GCC_ARCH denotes default ABI chosen by compiler driver
+ # (first one found on the $PATH). I assume that user
+ # expects certain consistency with the rest of his builds
+ # and therefore switch over to 64-bit. <appro>
+ OUT="solaris64-sparcv9-gcc"
+ echo "WARNING! If you wish to build 32-bit library, then you have to"
+ echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ elif [ "$GCC_ARCH" = "-m32" ]; then
+ echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
+ echo " and wish to build 64-bit library, then you have to"
+ echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ fi
+ fi
+ ;;
+ sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
+ sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
+ sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
+ *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
*-*-sunos4) OUT="sunos-$CC" ;;
- alpha*-*-freebsd) OUT="FreeBSD-alpha" ;;
- *-freebsd) OUT="FreeBSD" ;;
+ alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
+ sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
+ ia64-*-freebsd*) OUT="FreeBSD-ia64" ;;
+ *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
+ *-freebsd[1-2]*) OUT="FreeBSD" ;;
*86*-*-netbsd) OUT="NetBSD-x86" ;;
sun3*-*-netbsd) OUT="NetBSD-m68" ;;
*-*-netbsd) OUT="NetBSD-sparc" ;;
- *86*-*-openbsd) OUT="OpenBSD-x86" ;;
alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
+ *86*-*-openbsd) OUT="OpenBSD-i386" ;;
+ m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
+ m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
+ mips*-*-openbsd) OUT="OpenBSD-mips" ;;
pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
+ powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
+ sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
+ sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
+ vax*-*-openbsd) OUT="OpenBSD-vax" ;;
+ hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
*-*-openbsd) OUT="OpenBSD" ;;
*86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
- *-*-osf) OUT="alpha-cc" ;;
- *-*-unixware*) OUT="unixware-2.0" ;;
+ *-*-osf) OUT="alphaold-cc" ;;
+ *-*-tru64) OUT="alpha-cc" ;;
+ *-*-OpenUNIX*)
+ if [ "$CC" = "gcc" ]; then
+ OUT="OpenUNIX-8-gcc"
+ else
+ OUT="OpenUNIX-8"
+ fi
+ ;;
+ *-*-unixware7) OUT="unixware-7" ;;
+ *-*-UnixWare7) OUT="unixware-7" ;;
+ *-*-Unixware7) OUT="unixware-7" ;;
+ *-*-unixware20*) OUT="unixware-2.0" ;;
+ *-*-unixware21*) OUT="unixware-2.1" ;;
+ *-*-UnixWare20*) OUT="unixware-2.0" ;;
+ *-*-UnixWare21*) OUT="unixware-2.1" ;;
+ *-*-Unixware20*) OUT="unixware-2.0" ;;
+ *-*-Unixware21*) OUT="unixware-2.1" ;;
BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
*-siemens-sysv4) OUT="SINIX" ;;
+ *-hpux1*)
+ if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
+ OUT="hpux64-parisc2-gcc"
+ fi
+ KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+ KERNEL_BITS=${KERNEL_BITS:-32}
+ CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
+ CPU_VERSION=${CPU_VERSION:-0}
+ # See <sys/unistd.h> for further info on CPU_VERSION.
+ if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
+ echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
+ echo " If you wish to build 32-bit library, the you have to"
+ echo " invoke './Configure hpux-ia64-cc' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ OUT="hpux64-ia64-cc"
+ elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
+ OUT=${OUT:-"hpux-parisc2-${CC}"}
+ if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+ echo "WARNING! If you wish to build 64-bit library then you have to"
+ echo " invoke './Configure hpux64-parisc2-cc' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ fi
+ elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
+ OUT="hpux-parisc-${CC}
+ elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
+ OUT="hpux-parisc-${CC}
+ else # Motorola(?) CPU
+ OUT="hpux-$CC"
+ fi
+ options="$options -D_REENTRANT" ;;
+ *-hpux) OUT="hpux-parisc-$CC" ;;
# these are all covered by the catchall below
- # *-hpux*) OUT="hpux-$CC" ;;
# *-aix) OUT="aix-$CC" ;;
# *-dgux) OUT="dgux" ;;
+ mips-sony-newsos4) OUT="newsos4-gcc" ;;
+ *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
+ *-*-cygwin) OUT="Cygwin" ;;
+ t3e-cray-unicosmk) OUT="cray-t3e" ;;
+ j90-cray-unicos) OUT="cray-j90" ;;
+ nsr-tandem-nsk) OUT="tandem-c89" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
+# NB: This atalla support has been superceded by the ENGINE support
+# That contains its own header and definitions anyway. Support can
+# be enabled or disabled on any supported platform without external
+# headers, eg. by adding the "hw-atalla" switch to ./config or
+# perl Configure
+#
+# See whether we can compile Atalla support
+#if [ -f /usr/include/atasi.h ]
+#then
+# options="$options -DATALLA"
+#fi
+
# gcc < 2.8 does not support -mcpu=ultrasparc
-if [ "$OUT" = solaris-usparc-gcc -a $GCCVER -lt 28 ]
+if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
then
echo "WARNING! Do consider upgrading to gcc-2.8 or later."
- OUT=solaris-usparc-oldgcc
+ sleep 5
+ OUT=solaris-sparcv9-gcc27
fi
if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
then
echo "WARNING! Falling down to 'linux-sparcv8'."
echo " Upgrade to gcc-2.8 or later."
+ sleep 5
OUT=linux-sparcv8
fi
i386-*) options="$options 386" ;;
esac
-for i in bf cast des dh dsa hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
+for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
do
if [ ! -d crypto/$i ]
then
fi
done
+# Discover Kerberos 5 (since it's still a prototype, we don't
+# do any guesses yet, that's why this section is commented away.
+#if [ -d /usr/kerberos ]; then
+# krb5_dir=/usr/kerberos
+# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
+# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
+# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
+# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
+# -a \( -f $krb5_dir/include/krb5.h \) ]; then
+# options="$options --with-krb5-flavor=MIT"
+# fi
+#elif [ -d /usr/heimdal ]; then
+# krb5_dir=/usr/heimdal
+# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
+# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
+# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
+# -a \( -f $krb5_dir/include/krb5.h \) ]; then
+# options="$options --with-krb5-flavor=Heimdal"
+# fi
+#fi
+
if [ -z "$OUT" ]; then
OUT="$CC"
fi
# compiler for the platform ... in which case we add it on
# the end ... otherwise we leave it off
-$PERL ./Configure 2>&1 | grep "$OUT-$CC" > /dev/null
+$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
if [ $? = "0" ]; then
OUT="$OUT-$CC"
fi
OUT="$PREFIX$OUT"
-$PERL ./Configure 2>&1 | grep "$OUT" > /dev/null
+$PERL ./Configure LIST | grep "$OUT" > /dev/null
if [ $? = "0" ]; then
echo Configuring for $OUT