# Be as similar to the output of config.guess/config.sub
# as possible.
+PREFIX=""
+SUFFIX=""
+TEST="false"
+EXE=""
+
+# pick up any command line args to config
+for i
+do
+case "$i" in
+-d*) PREFIX="debug-";;
+-t*) TEST="true";;
+-h*) TEST="true"; cat <<EOF
+Usage: config [options]
+ -d Add a debug- prefix to machine choice.
+ -t Test mode, do not run the Configure perl script.
+ -h This help.
+
+Any other text will be passed to the Configure perl script.
+See INSTALL for instructions.
+
+EOF
+;;
+*) options=$options" $i" ;;
+esac
+done
+
# First get uname entries that we use below
MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
echo "whatever-whatever-sco5"; exit 0
;;
4.2MP)
- if [ "x$VERSION" = "x2.1.1" ]; then
- echo "${MACHINE}-whatever-unixware211"; exit 0
- elif [ "x$VERSION" = "x2.1.2" ]; then
- echo "${MACHINE}-whatever-unixware212"; exit 0
- else
- echo "${MACHINE}-whatever-unixware2"; exit 0
- fi
+ case "x${VERSION}" in
+ x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
+ x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
+ x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
+ esac
;;
4.2)
- echo "whatever-whatever-unixware1"; exit 0
+ echo "i386-whatever-unixware1"; exit 0
;;
5)
- if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
- echo "${MACHINE}-sco-unixware7"; exit 0
- fi
+ case "x${VERSION}" in
+ # We hardcode i586 in place of ${MACHINE} for the
+ # following reason. The catch is that even though Pentium
+ # is minimum requirement for platforms in question,
+ # ${MACHINE} gets always assigned to i386. Now, problem
+ # with i386 is that it makes ./config pass 386 to
+ # ./Configure, which in turn makes make generate
+ # inefficient SHA-1 (for this moment) code.
+ x7*) echo "i586-sco-unixware7"; exit 0 ;;
+ x8*) echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
+ esac
;;
esac
fi
echo "m68k-apple-aux3"; exit 0
;;
- AIX:*)
+ AIX:[3-9]:4:*)
echo "${MACHINE}-ibm-aix"; exit 0
;;
+ AIX:*:[5-9]:*)
+ echo "${MACHINE}-ibm-aix"; exit 0
+ ;;
+
+ AIX:*)
+ echo "${MACHINE}-ibm-aix3"; exit 0
+ ;;
+
dgux:*)
echo "${MACHINE}-dg-dgux"; exit 0
;;
HP-UX:*)
HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "$HPUXVER" in
- 11.*)
- echo "${MACHINE}-hp-hpux11"; exit 0
- ;;
- 10.*)
- echo "${MACHINE}-hp-hpux10"; exit 0
+ 1[0-9].*) # HPUX 10 and 11 targets are unified
+ echo "${MACHINE}-hp-hpux1x"; exit 0
;;
*)
echo "${MACHINE}-hp-hpux"; exit 0
echo "${MACHINE}-whatever-bsdi"; exit 0
;;
- FreeBSD:*)
+ FreeBSD:*:*:*386*)
VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
MACH=`sysctl -n hw.model`
ARCH='whatever'
*486* ) MACH="i486" ;;
Pentium\ II*) MACH="i686" ;;
Pentium* ) MACH="i586" ;;
- Alpha* ) MACH="alpha" ;;
* ) MACH="$MACHINE" ;;
esac
case ${MACH} in
echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
;;
+ FreeBSD:*)
+ echo "${MACHINE}-whatever-freebsd"; exit 0
+ ;;
+
NetBSD:*:*:*386*)
echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
;;
echo "${MACHINE}-whatever-openbsd"; exit 0
;;
+ OpenUNIX:*)
+ echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+ ;;
+
OSF1:*:*:*alpha*)
- echo "${MACHINE}-dec-osf"; exit 0
+ OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
+ case "$OSFMAJOR" in
+ 4|5)
+ echo "${MACHINE}-dec-tru64"; exit 0
+ ;;
+ 1|2|3)
+ echo "${MACHINE}-dec-osf"; exit 0
+ ;;
+ *)
+ echo "${MACHINE}-dec-osf"; exit 0
+ ;;
+ esac
;;
QNX:*)
- case "$VERSION" in
+ case "$RELEASE" in
4*)
echo "${MACHINE}-whatever-qnx4"
;;
+ 6*)
+ echo "${MACHINE}-whatever-qnx6"
+ ;;
*)
echo "${MACHINE}-whatever-qnx"
;;
;;
Darwin:*)
- echo "ppc-apple-darwin"; exit 0
+ case "$MACHINE" in
+ Power*)
+ echo "ppc-apple-darwin${VERSION}"
+ ;;
+ *)
+ echo "i386-apple-darwin${VERSION}"
+ ;;
+ esac
+ exit 0
;;
SunOS:5.*)
echo "${MACHINE}-whatever-sysv4"; exit 0
;;
+ VOS:*:*:i786)
+ echo "i386-stratus-vos"; exit 0
+ ;;
+
+ VOS:*:*:*)
+ echo "hppa1.1-stratus-vos"; exit 0
+ ;;
+
*:4*:R4*:m88k)
echo "${MACHINE}-whatever-sysv4"; exit 0
;;
echo "mips-sony-newsos4"; exit 0;
;;
+ CYGWIN*)
+ case "$RELEASE" in
+ [bB]*|1.0|1.[12].*)
+ echo "${MACHINE}-whatever-cygwin_pre1.3"
+ ;;
+ *)
+ echo "${MACHINE}-whatever-cygwin"
+ ;;
+ esac
+ exit 0
+ ;;
+
+ *"CRAY T3E")
+ echo "t3e-cray-unicosmk"; exit 0;
+ ;;
+
+ *CRAY*)
+ echo "j90-cray-unicos"; exit 0;
+ ;;
+
+ NONSTOP_KERNEL*)
+ echo "nsr-tandem-nsk"; exit 0;
+ ;;
esac
#
# this is where the translation occurs into SSLeay terms
# ---------------------------------------------------------------------------
-PREFIX=""
-SUFFIX=""
-TEST="false"
-
-# pick up any command line args to config
-for i
-do
-case "$i" in
--d*) PREFIX="debug-";;
--t*) TEST="true";;
--h*) TEST="true"; cat <<EOF
-Usage: config [options]
- -d Add a debug- prefix to machine choice.
- -t Test mode, do not run the Configure perl script.
- -h This help.
-
-Any other text will be passed to the Configure perl script.
-See INSTALL for instructions.
-
-EOF
-;;
-*) options=$options" $i" ;;
-esac
-done
-
# figure out if gcc is available and if so we use it otherwise
# we fallback to whatever cc does on the system
-GCCVER=`(gcc --version) 2>/dev/null`
+GCCVER=`(gcc -dumpversion) 2>/dev/null`
if [ "$GCCVER" != "" ]; then
CC=gcc
- # then strip off whatever prefix Cygnus prepends the number with...
- GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
+ # then strip off whatever prefix egcs prepends the number with...
+ # Hopefully, this will work for any future prefixes as well.
+ GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
+ # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
+ # does give us what we want though, so we use that. We just just the
+ # major and minor version numbers.
# peak single digit before and after first dot, e.g. 2.95.1 gives 29
GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
else
CC=cc
fi
-
+GCCVER=${GCCVER:-0}
+if [ "$SYSTEM" = "HP-UX" ];then
+ # By default gcc is a ILP32 compiler (with long long == 64).
+ GCC_BITS="32"
+ if [ $GCCVER -ge 30 ]; then
+ # PA64 support only came in with gcc 3.0.x.
+ # We check if the preprocessor symbol __LP64__ is defined...
+ if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
+ : # __LP64__ has slipped through, it therefore is not defined
+ else
+ GCC_BITS="64"
+ fi
+ fi
+fi
if [ "$SYSTEM" = "SunOS" ]; then
+ if [ $GCCVER -ge 30 ]; then
+ # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
+ # to be working, at the very least 'make test' passes...
+ if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
+ GCC_ARCH="-m64"
+ else
+ GCC_ARCH="-m32"
+ fi
+ fi
# check for WorkShop C, expected output is "cc: blah-blah C x.x"
CCVER=`(cc -V 2>&1) 2>/dev/null | \
egrep -e '^cc: .* C [0-9]\.[0-9]' | \
fi
fi
-GCCVER=${GCCVER:-0}
+if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
+ (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
+fi
+
CCVER=${CCVER:-0}
# read the output of the embedded GuessOS
# more time that I want to waste at the moment
case "$GUESSOS" in
mips2-sgi-irix)
- CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
CPU=${CPU:-0}
if [ $CPU -ge 4000 ]; then
options="$options -mips2"
OUT="irix-$CC"
;;
mips3-sgi-irix)
- CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
- CPU=${CPU:-0}
- if [ $CPU -ge 5000 ]; then
- options="$options -mips4"
- else
- options="$options -mips3"
- fi
+ #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ #CPU=${CPU:-0}
+ #if [ $CPU -ge 5000 ]; then
+ # options="$options -mips4"
+ #else
+ # options="$options -mips3"
+ #fi
OUT="irix-mips3-$CC"
;;
mips4-sgi-irix64)
echo "WARNING! If you wish to build 64-bit library, then you have to"
- echo " invoke './Configre irix64-mips4-$CC' *manually*."
- echo " Type return if you want to continue, Ctrl-C to abort."
- read waste < /dev/tty
- options="$options -mips4"
+ echo " invoke './Configure irix64-mips4-$CC' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ #CPU=${CPU:-0}
+ #if [ $CPU -ge 5000 ]; then
+ # options="$options -mips4"
+ #else
+ # options="$options -mips3"
+ #fi
OUT="irix-mips3-$CC"
;;
- alpha-*-linux2
+ alpha-*-linux2)
ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo`
case ${ISA:-generic} in
*[67]) OUT="linux-alpha+bwx-$CC" ;;
${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
rm dummy dummy.c
;;
+ ppc64-*-linux2)
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke './Configure linux-ppc64' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ OUT="linux-ppc"
+ ;;
ppc-*-linux2) OUT="linux-ppc" ;;
m68k-*-linux*) OUT="linux-m68k" ;;
ia64-*-linux?) OUT="linux-ia64" ;;
ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
- ppc-apple-darwin) OUT="darwin-ppc-cc" ;;
+ ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
+ i386-apple-darwin*) OUT="darwin-i386-cc" ;;
sparc64-*-linux2)
- #Before we can uncomment following lines we have to wait at least
- #till 64-bit glibc for SPARC is operational:-(
- #echo "WARNING! If you wish to build 64-bit library, then you have to"
- #echo " invoke './Configure linux64-sparcv9' *manually*."
- #echo " Type return if you want to continue, Ctrl-C to abort."
- #read waste < /dev/tty
+ echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
+ echo " and wish to build 64-bit library, then you have to"
+ echo " invoke './Configure linux64-sparcv9' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
OUT="linux-sparcv9" ;;
sparc-*-linux2)
KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
sun4d) OUT="linux-sparcv8" ;;
*) OUT="linux-sparcv7" ;;
esac ;;
+ parisc-*-linux2)
+ CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
+ CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
+
+ # ??TODO ?? Model transformations
+ # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
+ # assuming no further arch. identification will ever be used by GCC.
+ # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
+ # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
+ # for these chips in the future.
+ # PA7300LC -> 7100LC (1.1)
+ # PA8200 -> 8000 (2.0)
+ # PA8500 -> 8000 (2.0)
+ # PA8600 -> 8000 (2.0)
+
+ CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
+ # Finish Model transformations
+
+ options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
+ OUT="linux-parisc" ;;
arm*-*-linux2) OUT="linux-elf-arm" ;;
s390-*-linux2) OUT="linux-s390" ;;
- *-*-linux2) OUT="linux-elf" ;;
+ s390x-*-linux?) OUT="linux-s390x" ;;
+ x86_64-*-linux?) OUT="linux-x86_64" ;;
+ *-*-linux2) OUT="linux-elf"
+ if [ "$GCCVER" -gt 28 ]; then
+ if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
+ OUT="linux-pentium"
+ fi
+ if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
+ OUT="linux-ppro"
+ fi
+ if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
+ OUT="linux-k6"
+ fi
+ fi ;;
*-*-linux1) OUT="linux-aout" ;;
sun4u*-*-solaris2)
+ OUT="solaris-sparcv9-$CC"
ISA64=`(isalist) 2>/dev/null | grep sparcv9`
- if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then
+ if [ "$ISA64" != "" ]; then
+ if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
- echo " Type return if you want to continue, Ctrl-C to abort."
- read waste < /dev/tty
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
+ # $GCC_ARCH denotes default ABI chosen by compiler driver
+ # (first one found on the $PATH). I assume that user
+ # expects certain consistency with the rest of his builds
+ # and therefore switch over to 64-bit. <appro>
+ OUT="solaris64-sparcv9-gcc"
+ echo "WARNING! If you wish to build 32-bit library, then you have to"
+ echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ elif [ "$GCC_ARCH" = "-m32" ]; then
+ echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
+ echo " and wish to build 64-bit library, then you have to"
+ echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ fi
fi
- OUT="solaris-sparcv9-$CC" ;;
+ ;;
sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
*86*-*-solaris2) OUT="solaris-x86-$CC" ;;
*-*-sunos4) OUT="sunos-$CC" ;;
alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
+ sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
+ ia64-*-freebsd*) OUT="FreeBSD-ia64" ;;
*-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
*-freebsd[1-2]*) OUT="FreeBSD" ;;
*86*-*-netbsd) OUT="NetBSD-x86" ;;
sun3*-*-netbsd) OUT="NetBSD-m68" ;;
*-*-netbsd) OUT="NetBSD-sparc" ;;
- *86*-*-openbsd) OUT="OpenBSD-x86" ;;
alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
+ *86*-*-openbsd) OUT="OpenBSD-i386" ;;
+ m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
+ m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
+ mips*-*-openbsd) OUT="OpenBSD-mips" ;;
pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
+ powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
+ sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
+ sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
+ vax*-*-openbsd) OUT="OpenBSD-vax" ;;
+ hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
*-*-openbsd) OUT="OpenBSD" ;;
*86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
- *-*-osf) OUT="alpha-cc" ;;
+ *-*-osf) OUT="alphaold-cc" ;;
+ *-*-tru64) OUT="alpha-cc" ;;
+ *-*-OpenUNIX*)
+ if [ "$CC" = "gcc" ]; then
+ OUT="OpenUNIX-8-gcc"
+ else
+ OUT="OpenUNIX-8"
+ fi
+ ;;
*-*-unixware7) OUT="unixware-7" ;;
*-*-UnixWare7) OUT="unixware-7" ;;
*-*-Unixware7) OUT="unixware-7" ;;
- *-*-unixware[1-2]*) OUT="unixware-2.0" ;;
- *-*-UnixWare[1-2]*) OUT="unixware-2.0" ;;
- *-*-Unixware[1-2]*) OUT="unixware-2.0" ;;
+ *-*-unixware20*) OUT="unixware-2.0" ;;
+ *-*-unixware21*) OUT="unixware-2.1" ;;
+ *-*-UnixWare20*) OUT="unixware-2.0" ;;
+ *-*-UnixWare21*) OUT="unixware-2.1" ;;
+ *-*-Unixware20*) OUT="unixware-2.0" ;;
+ *-*-Unixware21*) OUT="unixware-2.1" ;;
+ *-*-vos)
+ options="$options no-threads no-shared no-asm no-dso"
+ EXE=".pm"
+ OUT="vos-$CC" ;;
BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
*-siemens-sysv4) OUT="SINIX" ;;
- *-hpux1*) OUT="hpux-parisc-$CC"
- options="$options -D_REENTRANT" ;;
+ *-hpux1*)
+ if [ $CC = "gcc" ];
+ then
+ if [ $GCC_BITS = "64" ]; then
+ OUT="hpux64-parisc2-gcc"
+ else
+ OUT="hpux-parisc-gcc"
+ fi
+ else
+ OUT="hpux-parisc-$CC"
+ fi
+ KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+ KERNEL_BITS=${KERNEL_BITS:-32}
+ CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
+ CPU_VERSION=${CPU_VERSION:-0}
+ # See <sys/unistd.h> for further info on CPU_VERSION.
+ if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
+ echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
+ echo " If you wish to build 32-bit library, the you have to"
+ echo " invoke './Configure hpux-ia64-cc' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ OUT="hpux64-ia64-cc"
+ elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
+ if [ "$CC" = "cc" ]; then
+ OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc?
+ fi
+ if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+ echo "WARNING! If you wish to build 64-bit library then you have to"
+ echo " invoke './Configure hpux64-parisc2-cc' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have about 5 seconds to press Ctrl-C to abort."
+ (stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ fi
+ elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
+ :
+ elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
+ :
+ else # Motorola(?) CPU
+ OUT="hpux-$CC"
+ fi
+ options="$options -D_REENTRANT" ;;
*-hpux) OUT="hpux-parisc-$CC" ;;
+ *-aix)
+ KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
+ KERNEL_BITS=${KERNEL_BITS:-32}
+ OBJECT_MODE=${OBJECT_MODE:-32}
+ if [ "$CC" = "gcc" ]; then
+ OUT="aix-gcc"
+ elif [ $OBJECT_MODE -eq 64 ]; then
+ echo 'Your $OBJECT_MODE was found to be set to 64'
+ OUT="aix64-cc"
+ else
+ OUT="aix-cc"
+ if [ $KERNEL_BITS -eq 64 ]; then
+ echo "WARNING! If you wish to build 64-bit kit, then you have to"
+ echo " invoke './Configure aix64-cc' *manually*."
+ if [ "$TEST" = "false" ]; then
+ echo " You have ~5 seconds to press Ctrl-C to abort."
+ (/bin/stty -icanon min 0 time 50; read waste) < /dev/tty
+ fi
+ fi
+ fi
+ ;;
# these are all covered by the catchall below
- # *-aix) OUT="aix-$CC" ;;
# *-dgux) OUT="dgux" ;;
mips-sony-newsos4) OUT="newsos4-gcc" ;;
+ *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
+ *-*-cygwin) OUT="Cygwin" ;;
+ t3e-cray-unicosmk) OUT="cray-t3e" ;;
+ j90-cray-unicos) OUT="cray-j90" ;;
+ nsr-tandem-nsk) OUT="tandem-c89" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
i386-*) options="$options 386" ;;
esac
-for i in bf cast des dh dsa hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
+for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
do
if [ ! -d crypto/$i ]
then
if [ ".$PERL" = . ] ; then
for i in . `echo $PATH | sed 's/:/ /g'`; do
- if [ -f "$i/perl5" ] ; then
- PERL="$i/perl5"
+ if [ -f "$i/perl5$EXE" ] ; then
+ PERL="$i/perl5$EXE"
break;
fi;
done
if [ ".$PERL" = . ] ; then
for i in . `echo $PATH | sed 's/:/ /g'`; do
- if [ -f "$i/perl" ] ; then
- if "$i/perl" -e 'exit($]<5.0)'; then
- PERL="$i/perl"
+ if [ -f "$i/perl$EXE" ] ; then
+ if "$i/perl$EXE" -e 'exit($]<5.0)'; then
+ PERL="$i/perl$EXE"
break;
fi;
fi;