# Be as similar to the output of config.guess/config.sub
# as possible.
-PREFIX=""
-SUFFIX=""
-TEST="false"
-
-# pick up any command line args to config
-for i
-do
-case "$i" in
--d*) PREFIX="debug-";;
--t*) TEST="true";;
--h*) TEST="true"; cat <<EOF
-Usage: config [options]
- -d Add a debug- prefix to machine choice.
- -t Test mode, do not run the Configure perl script.
- -h This help.
-
-Any other text will be passed to the Configure perl script.
-See INSTALL for instructions.
-
-EOF
-;;
-*) options=$options" $i" ;;
-esac
-done
-
# First get uname entries that we use below
MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
4.2)
echo "whatever-whatever-unixware1"; exit 0
;;
- OpenUNIX)
+ OpenUNIX)
if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
fi
HP-UX:*)
HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "$HPUXVER" in
- 1[0-9].*) # HPUX 10 and 11 targets are unified
+ 11.*)
+ echo "${MACHINE}-hp-hpux11"; exit 0
+ ;;
+ 10.*)
echo "${MACHINE}-hp-hpux10"; exit 0
;;
*)
echo "${MACHINE}-whatever-linux1"; exit 0
;;
- GNU*)
- echo "hurd-x86"; exit 0;
- ;;
-
LynxOS:*)
echo "${MACHINE}-lynx-lynxos"; exit 0
;;
;;
QNX:*)
- case "$VERSION" in
+ case "$RELEASE" in
4*)
echo "${MACHINE}-whatever-qnx4"
;;
+ 6*)
+ echo "${MACHINE}-whatever-qnx6"
+ ;;
*)
echo "${MACHINE}-whatever-qnx"
;;
;;
Darwin:*)
- case "$MACHINE" in
- Power*)
- echo "ppc-apple-darwin${VERSION}"
- ;;
- *)
- echo "i386-apple-darwin${VERSION}"
- ;;
- esac
- exit 0
+ echo "ppc-apple-darwin"; exit 0
;;
SunOS:5.*)
echo "mips-sony-newsos4"; exit 0;
;;
+ CYGWIN*)
+ case "$RELEASE" in
+ [bB]*|1.0|1.[12].*)
+ echo "${MACHINE}-whatever-cygwin_pre1.3"
+ ;;
+ *)
+ echo "${MACHINE}-whatever-cygwin"
+ ;;
+ esac
+ exit 0
+ ;;
+
esac
#
# this is where the translation occurs into SSLeay terms
# ---------------------------------------------------------------------------
+PREFIX=""
+SUFFIX=""
+TEST="false"
+
+# pick up any command line args to config
+for i
+do
+case "$i" in
+-d*) PREFIX="debug-";;
+-t*) TEST="true";;
+-h*) TEST="true"; cat <<EOF
+Usage: config [options]
+ -d Add a debug- prefix to machine choice.
+ -t Test mode, do not run the Configure perl script.
+ -h This help.
+
+Any other text will be passed to the Configure perl script.
+See INSTALL for instructions.
+
+EOF
+;;
+*) options=$options" $i" ;;
+esac
+done
+
# figure out if gcc is available and if so we use it otherwise
# we fallback to whatever cc does on the system
GCCVER=`(gcc --version) 2>/dev/null`
else
CC=cc
fi
-GCCVER=${GCCVER:-0}
if [ "$SYSTEM" = "SunOS" ]; then
- if [ $GCCVER -ge 30 ]; then
- # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
- # to be working, at the very least 'make test' passes...
- if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
- GCC_ARCH="-m64"
- else
- GCC_ARCH="-m32"
- fi
- fi
# check for WorkShop C, expected output is "cc: blah-blah C x.x"
CCVER=`(cc -V 2>&1) 2>/dev/null | \
egrep -e '^cc: .* C [0-9]\.[0-9]' | \
fi
fi
+GCCVER=${GCCVER:-0}
CCVER=${CCVER:-0}
# read the output of the embedded GuessOS
mips4-sgi-irix64)
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke './Configure irix64-mips4-$CC' *manually*."
- if [ "$TEST" = "false" ]; then
- echo " You have about 5 seconds to press Ctrl-C to abort."
- (stty -icanon min 0 time 50; read waste) < /dev/tty
- fi
+ echo " Type return if you want to continue, Ctrl-C to abort."
+ read waste < /dev/tty
CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
CPU=${CPU:-0}
if [ $CPU -ge 5000 ]; then
m68k-*-linux*) OUT="linux-m68k" ;;
ia64-*-linux?) OUT="linux-ia64" ;;
ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
- ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
- i386-apple-darwin*) OUT="darwin-i386-cc" ;;
+ ppc-apple-darwin) OUT="darwin-ppc-cc" ;;
sparc64-*-linux2)
#Before we can uncomment following lines we have to wait at least
#till 64-bit glibc for SPARC is operational:-(
sun4d) OUT="linux-sparcv8" ;;
*) OUT="linux-sparcv7" ;;
esac ;;
+ parisc-*-linux2)
+ CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
+ CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
+
+ # ??TODO ?? Model transformations
+ # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
+ # assuming no further arch. identification will ever be used by GCC.
+ # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
+ # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
+ # for these chips in the future.
+ # PA7300LC -> 7100LC (1.1)
+ # PA8200 -> 8000 (2.0)
+ # PA8500 -> 8000 (2.0)
+ # PA8600 -> 8000 (2.0)
+
+ CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
+ # Finish Model transformations
+
+ options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
+ OUT="linux-parisc" ;;
arm*-*-linux2) OUT="linux-elf-arm" ;;
s390-*-linux2) OUT="linux-s390" ;;
- *-*-linux2) OUT="linux-elf"
- if [ "$GCCVER" -gt 28 ]; then
- if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
- OUT="linux-pentium"
- fi
- if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
- OUT="linux-ppro"
- fi
- if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
- OUT="linux-k6"
- fi
- fi ;;
+ s390x-*-linux?) OUT="linux-s390x" ;;
+ *-*-linux2) OUT="linux-elf" ;;
*-*-linux1) OUT="linux-aout" ;;
sun4u*-*-solaris2)
- OUT="solaris-sparcv9-$CC"
ISA64=`(isalist) 2>/dev/null | grep sparcv9`
- if [ "$ISA64" != "" ]; then
- if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
+ if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
- if [ "$TEST" = "false" ]; then
- echo " You have about 5 seconds to press Ctrl-C to abort."
- (stty -icanon min 0 time 50; read waste) < /dev/tty
- fi
- elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
- # $GCC_ARCH denotes default ABI chosen by compiler driver
- # (first one found on the $PATH). I assume that user
- # expects certain consistency with the rest of his builds
- # and therefore switch over to 64-bit. <appro>
- OUT="solaris64-sparcv9-gcc"
- echo "WARNING! If you wish to build 32-bit library, then you have to"
- echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
- if [ "$TEST" = "false" ]; then
- echo " You have about 5 seconds to press Ctrl-C to abort."
- (stty -icanon min 0 time 50; read waste) < /dev/tty
- fi
- elif [ "$GCC_ARCH" = "-m32" ]; then
- echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
- echo " and wish to build 64-bit library, then you have to"
- echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
- if [ "$TEST" = "false" ]; then
- echo " You have about 5 seconds to press Ctrl-C to abort."
- (stty -icanon min 0 time 50; read waste) < /dev/tty
- fi
- fi
+ echo " Type return if you want to continue, Ctrl-C to abort."
+ read waste < /dev/tty
fi
- ;;
+ OUT="solaris-sparcv9-$CC" ;;
sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
*-siemens-sysv4) OUT="SINIX" ;;
- *-hpux1*)
- OUT="hpux-parisc-$CC"
- KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
- KERNEL_BITS=${KERNEL_BITS:-32}
- CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
- CPU_VERSION=${CPU_VERSION:-0}
- # See <sys/unistd.h> for further info on CPU_VERSION.
- if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
- echo "NOTICE! 64-bit is the only ABI currently operational on HP-UXi."
- echo " Post request to openssl-dev@openssl.org for 32-bit support."
- if [ "$TEST" = "false" ]; then
- (stty -icanon min 0 time 50; read waste) < /dev/tty
- fi
- OUT="hpux64-ia64-cc"
- elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
- if [ "$CC" = "cc" ]; then
- OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc?
- fi
- if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
- echo "WARNING! If you wish to build 64-bit library then you have to"
- echo " invoke './Configure hpux64-parisc2-cc' *manually*."
- if [ "$TEST" = "false" ]; then
- echo " You have about 5 seconds to press Ctrl-C to abort."
- (stty -icanon min 0 time 50; read waste) < /dev/tty
- fi
- fi
- elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
- :
- elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
- :
- else # Motorola(?) CPU
- OUT="hpux-$CC"
- fi
- options="$options -D_REENTRANT" ;;
+ *-hpux1*) OUT="hpux-parisc-$CC"
+ options="$options -D_REENTRANT" ;;
*-hpux) OUT="hpux-parisc-$CC" ;;
# these are all covered by the catchall below
# *-aix) OUT="aix-$CC" ;;
# *-dgux) OUT="dgux" ;;
mips-sony-newsos4) OUT="newsos4-gcc" ;;
+ *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
+ *-*-cygwin) OUT="Cygwin" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
-# NB: This atalla support has been superceded by the ENGINE support
-# That contains its own header and definitions anyway. Support can
-# be enabled or disabled on any supported platform without external
-# headers, eg. by adding the "hw-atalla" switch to ./config or
-# perl Configure
-#
# See whether we can compile Atalla support
-#if [ -f /usr/include/atasi.h ]
-#then
-# options="$options -DATALLA"
-#fi
+if [ -f /usr/include/atasi.h ]
+then
+ options="$options -DATALLA"
+fi
# gcc < 2.8 does not support -mcpu=ultrasparc
if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
i386-*) options="$options 386" ;;
esac
-for i in bf cast des dh dsa ec hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
+for i in bf cast des dh dsa hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
do
if [ ! -d crypto/$i ]
then
fi
done
-# Discover Kerberos 5 (since it's still a prototype, we don't
-# do any guesses yet, that's why this section is commented away.
-#if [ -d /usr/kerberos ]; then
-# krb5_dir=/usr/kerberos
-# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
-# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
-# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
-# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
-# -a \( -f $krb5_dir/include/krb5.h \) ]; then
-# options="$options --with-krb5-flavor=MIT"
-# fi
-#elif [ -d /usr/heimdal ]; then
-# krb5_dir=/usr/heimdal
-# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
-# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
-# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
-# -a \( -f $krb5_dir/include/krb5.h \) ]; then
-# options="$options --with-krb5-flavor=Heimdal"
-# fi
-#fi
-
if [ -z "$OUT" ]; then
OUT="$CC"
fi
projects / oweals / openssl.git / blobdiff