4.2)
echo "whatever-whatever-unixware1"; exit 0
;;
+ OpenUNIX)
+ if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
+ echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+ fi
+ ;;
5)
if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
echo "${MACHINE}-sco-unixware7"; exit 0
echo "${MACHINE}-whatever-openbsd"; exit 0
;;
+ OpenUNIX:*)
+ echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+ ;;
+
OSF1:*:*:*alpha*)
OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
case "$OSFMAJOR" in
;;
QNX:*)
- case "$VERSION" in
+ case "$RELEASE" in
4*)
echo "${MACHINE}-whatever-qnx4"
;;
+ 6*)
+ echo "${MACHINE}-whatever-qnx6"
+ ;;
*)
echo "${MACHINE}-whatever-qnx"
;;
echo "mips-sony-newsos4"; exit 0;
;;
+ CYGWIN*)
+ case "$RELEASE" in
+ [bB]*|1.0|1.[12].*)
+ echo "${MACHINE}-whatever-cygwin_pre1.3"
+ ;;
+ *)
+ echo "${MACHINE}-whatever-cygwin"
+ ;;
+ esac
+ exit 0
+ ;;
+
+ *"CRAY T3E")
+ echo "t3e-cray-unicosmk"; exit 0;
+ ;;
+
+ *CRAY*)
+ echo "j90-cray-unicos"; exit 0;
+ ;;
esac
#
# figure out if gcc is available and if so we use it otherwise
# we fallback to whatever cc does on the system
-GCCVER=`(gcc --version) 2>/dev/null`
+GCCVER=`(gcc -dumpversion) 2>/dev/null`
if [ "$GCCVER" != "" ]; then
CC=gcc
- # then strip off whatever prefix Cygnus prepends the number with...
- GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
+ # then strip off whatever prefix egcs prepends the number with...
+ # Hopefully, this will work for any future prefixes as well.
+ GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
+ # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
+ # does give us what we want though, so we use that. We just just the
+ # major and minor version numbers.
# peak single digit before and after first dot, e.g. 2.95.1 gives 29
GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
else
CC=cc
fi
GCCVER=${GCCVER:-0}
-
+if [ "$SYSTEM" = "HP-UX" ];then
+ # By default gcc is a ILP32 compiler (with long long == 64).
+ GCC_BITS="32"
+ if [ $GCCVER -ge 30 ]; then
+ # PA64 support only came in with gcc 3.0.x.
+ # We look for the preprocessor symbol __LP64__ indicating
+ # 64bit bit long and pointer. sizeof(int) == 32 on HPUX64.
+ if gcc -v -E -x c /dev/null 2>&1 | grep __LP64__ > /dev/null; then
+ GCC_BITS="64"
+ fi
+ fi
+fi
if [ "$SYSTEM" = "SunOS" ]; then
if [ $GCCVER -ge 30 ]; then
# 64-bit ABI isn't officially supported in gcc 3.0, but it appears
${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
rm dummy dummy.c
;;
+ ppc64-*-linux2)
+ #Use the standard target for PPC architecture until we create a
+ #special one for the 64bit architecture.
+ OUT="linux-ppc" ;;
ppc-*-linux2) OUT="linux-ppc" ;;
m68k-*-linux*) OUT="linux-m68k" ;;
ia64-*-linux?) OUT="linux-ia64" ;;
sun4d) OUT="linux-sparcv8" ;;
*) OUT="linux-sparcv7" ;;
esac ;;
+ parisc-*-linux2)
+ CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
+ CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
+
+ # ??TODO ?? Model transformations
+ # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
+ # assuming no further arch. identification will ever be used by GCC.
+ # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
+ # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
+ # for these chips in the future.
+ # PA7300LC -> 7100LC (1.1)
+ # PA8200 -> 8000 (2.0)
+ # PA8500 -> 8000 (2.0)
+ # PA8600 -> 8000 (2.0)
+
+ CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
+ # Finish Model transformations
+
+ options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
+ OUT="linux-parisc" ;;
arm*-*-linux2) OUT="linux-elf-arm" ;;
s390-*-linux2) OUT="linux-s390" ;;
+ s390x-*-linux?) OUT="linux-s390x" ;;
*-*-linux2) OUT="linux-elf"
if [ "$GCCVER" -gt 28 ]; then
if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
*86*-*-netbsd) OUT="NetBSD-x86" ;;
sun3*-*-netbsd) OUT="NetBSD-m68" ;;
*-*-netbsd) OUT="NetBSD-sparc" ;;
- *86*-*-openbsd) OUT="OpenBSD-x86" ;;
alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
+ *86*-*-openbsd) OUT="OpenBSD-i386" ;;
+ m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
+ m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
+ mips*-*-openbsd) OUT="OpenBSD-mips" ;;
pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
+ powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
+ sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
+ sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
+ vax*-*-openbsd) OUT="OpenBSD-vax" ;;
+ hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
*-*-openbsd) OUT="OpenBSD" ;;
*86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
*-*-osf) OUT="alphaold-cc" ;;
*-*-tru64) OUT="alpha-cc" ;;
+ *-*-OpenUNIX*)
+ if [ "$CC" = "gcc" ]; then
+ OUT="OpenUNIX-8-gcc"
+ else
+ OUT="OpenUNIX-8"
+ fi
+ ;;
*-*-unixware7) OUT="unixware-7" ;;
*-*-UnixWare7) OUT="unixware-7" ;;
*-*-Unixware7) OUT="unixware-7" ;;
RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
*-siemens-sysv4) OUT="SINIX" ;;
*-hpux1*)
- OUT="hpux-parisc-$CC"
+ if [ $CC = "gcc" ];
+ then
+ if [ $GCC_BITS = "64" ]; then
+ OUT="hpux64-parisc-gcc"
+ else
+ OUT="hpux-parisc-gcc"
+ fi
+ else
+ OUT="hpux-parisc-$CC"
+ fi
KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
KERNEL_BITS=${KERNEL_BITS:-32}
CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
# *-aix) OUT="aix-$CC" ;;
# *-dgux) OUT="dgux" ;;
mips-sony-newsos4) OUT="newsos4-gcc" ;;
+ *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
+ *-*-cygwin) OUT="Cygwin" ;;
+ t3e-cray-unicosmk) OUT="cray-t3e" ;;
+ j90-cray-unicos) OUT="cray-j90" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
i386-*) options="$options 386" ;;
esac
-for i in bf cast des dh dsa ec hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
+for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 rijndael ripemd rsa sha
do
if [ ! -d crypto/$i ]
then