echo "whatever-whatever-sco5"; exit 0
;;
4.2MP)
- if [ "x$VERSION" = "x2.1.1" ]; then
+ if [ "x$VERSION" = "x2.01" ]; then
+ echo "${MACHINE}-whatever-unixware201"; exit 0
+ elif [ "x$VERSION" = "x2.02" ]; then
+ echo "${MACHINE}-whatever-unixware202"; exit 0
+ elif [ "x$VERSION" = "x2.03" ]; then
+ echo "${MACHINE}-whatever-unixware203"; exit 0
+ elif [ "x$VERSION" = "x2.1.1" ]; then
echo "${MACHINE}-whatever-unixware211"; exit 0
elif [ "x$VERSION" = "x2.1.2" ]; then
echo "${MACHINE}-whatever-unixware212"; exit 0
+ elif [ "x$VERSION" = "x2.1.3" ]; then
+ echo "${MACHINE}-whatever-unixware213"; exit 0
else
echo "${MACHINE}-whatever-unixware2"; exit 0
fi
4.2)
echo "whatever-whatever-unixware1"; exit 0
;;
+ OpenUNIX)
+ if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
+ echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+ fi
+ ;;
5)
if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
echo "${MACHINE}-sco-unixware7"; exit 0
# Now we simply scan though... In most cases, the SYSTEM info is enough
#
case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
+ MPE/iX:*)
+ MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
+ echo "parisc-hp-MPE/iX"; exit 0
+ ;;
A/UX:*)
echo "m68k-apple-aux3"; exit 0
;;
+ AIX:[3456789]:4:*)
+ echo "${MACHINE}-ibm-aix43"; exit 0
+ ;;
+
+ AIX:*:[56789]:*)
+ echo "${MACHINE}-ibm-aix43"; exit 0
+ ;;
+
AIX:*)
echo "${MACHINE}-ibm-aix"; exit 0
;;
;;
NetBSD:*:*:*386*)
- echo "`/usr/sbin/sysctl -n hw.model | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
+ echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
;;
NetBSD:*)
echo "${MACHINE}-whatever-openbsd"; exit 0
;;
+ OpenUNIX:*)
+ echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
+ ;;
+
OSF1:*:*:*alpha*)
- echo "${MACHINE}-dec-osf"; exit 0
+ OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
+ case "$OSFMAJOR" in
+ 4|5)
+ echo "${MACHINE}-dec-tru64"; exit 0
+ ;;
+ 1|2|3)
+ echo "${MACHINE}-dec-osf"; exit 0
+ ;;
+ *)
+ echo "${MACHINE}-dec-osf"; exit 0
+ ;;
+ esac
;;
QNX:*)
- case "$VERSION" in
- 425)
- echo "${MACHINE}-qssl-qnx4"
+ case "$RELEASE" in
+ 4*)
+ echo "${MACHINE}-whatever-qnx4"
;;
- 423)
- echo "${MACHINE}-qssl-qnx32"
+ 6*)
+ echo "${MACHINE}-whatever-qnx6"
;;
*)
- echo "${MACHINE}-qssl-qnx"
+ echo "${MACHINE}-whatever-qnx"
;;
esac
exit 0
echo "ppc-apple-rhapsody"; exit 0
;;
+ Darwin:*)
+ echo "ppc-apple-darwin"; exit 0
+ ;;
+
SunOS:5.*)
- echo "${MACHINE}-sun-solaris2"; exit 0
+ echo "${MACHINE}-whatever-solaris2"; exit 0
;;
SunOS:*)
echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
;;
+ NEWS-OS:4.*)
+ echo "mips-sony-newsos4"; exit 0;
+ ;;
+
+ CYGWIN*)
+ case "$RELEASE" in
+ [bB]*|1.0|1.[12].*)
+ echo "${MACHINE}-whatever-cygwin_pre1.3"
+ ;;
+ *)
+ echo "${MACHINE}-whatever-cygwin"
+ ;;
+ esac
+ exit 0
+ ;;
+
+ *"CRAY T3E")
+ echo "t3e-cray-unicosmk"; exit 0;
+ ;;
+
+ *CRAY*)
+ echo "j90-cray-unicos"; exit 0;
+ ;;
esac
#
;;
mips4-sgi-irix64)
echo "WARNING! If you wish to build 64-bit library, then you have to"
- echo " invoke './Configre irix64-mips4-$CC' *manually*."
- echo " Type Ctrl-C if you don't want to continue."
+ echo " invoke './Configure irix64-mips4-$CC' *manually*."
+ echo " Type return if you want to continue, Ctrl-C to abort."
read waste < /dev/tty
- options="$options -mips4"
+ CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ CPU=${CPU:-0}
+ if [ $CPU -ge 5000 ]; then
+ options="$options -mips4"
+ else
+ options="$options -mips3"
+ fi
OUT="irix-mips3-$CC"
;;
alpha-*-linux2)
esac
fi
;;
- mips-*-linux?) OUT="linux-mips" ;;
+ mips-*-linux?)
+ cat >dummy.c <<EOF
+#include <stdio.h> /* for printf() prototype */
+ int main (argc, argv) int argc; char *argv[]; {
+#ifdef __MIPSEB__
+ printf ("linux-%s\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+ printf ("linux-%sel\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
+ rm dummy dummy.c
+ ;;
ppc-*-linux2) OUT="linux-ppc" ;;
m68k-*-linux*) OUT="linux-m68k" ;;
ia64-*-linux?) OUT="linux-ia64" ;;
ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
+ ppc-apple-darwin) OUT="darwin-ppc-cc" ;;
sparc64-*-linux2)
#Before we can uncomment following lines we have to wait at least
#till 64-bit glibc for SPARC is operational:-(
#echo "WARNING! If you wish to build 64-bit library, then you have to"
#echo " invoke './Configure linux64-sparcv9' *manually*."
- #echo " Type Ctrl-C if you don't want to continue."
+ #echo " Type return if you want to continue, Ctrl-C to abort."
#read waste < /dev/tty
OUT="linux-sparcv9" ;;
sparc-*-linux2)
- KARCH=`awk '/type/{print$3}' /proc/cpuinfo`
+ KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
case ${KARCH:-sun4} in
sun4u*) OUT="linux-sparcv9" ;;
sun4m) OUT="linux-sparcv8" ;;
sun4d) OUT="linux-sparcv8" ;;
*) OUT="linux-sparcv7" ;;
esac ;;
+ parisc-*-linux2)
+ CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
+ CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
+
+ # ??TODO ?? Model transformations
+ # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
+ # assuming no further arch. identification will ever be used by GCC.
+ # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
+ # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
+ # for these chips in the future.
+ # PA7300LC -> 7100LC (1.1)
+ # PA8200 -> 8000 (2.0)
+ # PA8500 -> 8000 (2.0)
+ # PA8600 -> 8000 (2.0)
+
+ CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
+ # Finish Model transformations
+
+ options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
+ OUT="linux-parisc" ;;
arm*-*-linux2) OUT="linux-elf-arm" ;;
+ s390-*-linux2) OUT="linux-s390" ;;
+ s390x-*-linux?) OUT="linux-s390x" ;;
*-*-linux2) OUT="linux-elf" ;;
*-*-linux1) OUT="linux-aout" ;;
- sun4u*-sun-solaris2)
+ sun4u*-*-solaris2)
ISA64=`(isalist) 2>/dev/null | grep sparcv9`
if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then
echo "WARNING! If you wish to build 64-bit library, then you have to"
echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
- echo " Type Ctrl-C if you don't want to continue."
+ echo " Type return if you want to continue, Ctrl-C to abort."
read waste < /dev/tty
fi
OUT="solaris-sparcv9-$CC" ;;
- sun4m-sun-solaris2) OUT="solaris-sparcv8-$CC" ;;
- sun4d-sun-solaris2) OUT="solaris-sparcv8-$CC" ;;
- sun4*-sun-solaris2) OUT="solaris-sparcv7-$CC" ;;
- *86*-sun-solaris2) OUT="solaris-x86-$CC" ;;
+ sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
+ sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
+ sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
+ *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
*-*-sunos4) OUT="sunos-$CC" ;;
alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
*-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
*-*-openbsd) OUT="OpenBSD" ;;
*86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
- *-*-osf) OUT="alpha-cc" ;;
+ *-*-osf) OUT="alphaold-cc" ;;
+ *-*-tru64) OUT="alpha-cc" ;;
+ *-*-OpenUNIX*)
+ if [ "$CC" = "gcc" ]; then
+ OUT="OpenUNIX-8-gcc"
+ else
+ OUT="OpenUNIX-8"
+ fi
+ ;;
*-*-unixware7) OUT="unixware-7" ;;
*-*-UnixWare7) OUT="unixware-7" ;;
*-*-Unixware7) OUT="unixware-7" ;;
- *-*-unixware[1-2]*) OUT="unixware-2.0" ;;
- *-*-UnixWare[1-2]*) OUT="unixware-2.0" ;;
- *-*-Unixware[1-2]*) OUT="unixware-2.0" ;;
+ *-*-unixware20*) OUT="unixware-2.0" ;;
+ *-*-unixware21*) OUT="unixware-2.1" ;;
+ *-*-UnixWare20*) OUT="unixware-2.0" ;;
+ *-*-UnixWare21*) OUT="unixware-2.1" ;;
+ *-*-Unixware20*) OUT="unixware-2.0" ;;
+ *-*-Unixware21*) OUT="unixware-2.1" ;;
BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
*-siemens-sysv4) OUT="SINIX" ;;
# these are all covered by the catchall below
# *-aix) OUT="aix-$CC" ;;
# *-dgux) OUT="dgux" ;;
+ mips-sony-newsos4) OUT="newsos4-gcc" ;;
+ *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
+ *-*-cygwin) OUT="Cygwin" ;;
+ t3e-cray-unicosmk) OUT="cray-t3e" ;;
+ j90-cray-unicos) OUT="cray-j90" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
sleep 5
OUT=linux-sparcv8
fi
-# To start with $OUT is never i86pc-sun-solaris2. Secondly why
-# ban *all* assembler implementation if it can't stand only one,
-# SHA-0 implementation.
-#if [ "$OUT" = "i86pc-sun-solaris2" ]
-#then
-# ASM=`as -V /dev/null 2>&1`
-# case "$ASM" in
-# GNU*) ;;
-# *) options="$options no-asm" ; echo "WARNING: You need the GNU assembler to use OpenSSL assembler code." ; echo "Sun as is not supported on Solaris x86." ;;
-# esac
-#fi
case "$GUESSOS" in
i386-*) options="$options 386" ;;
esac
-for i in bf cast des dh dsa hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
+for i in bf cast des dh dsa hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
do
if [ ! -d crypto/$i ]
then
$PERL ./Configure LIST | grep "$OUT" > /dev/null
if [ $? = "0" ]; then
- #echo Configuring for $OUT
+ echo Configuring for $OUT
if [ "$TEST" = "true" ]; then
echo $PERL ./Configure $OUT $options
projects / oweals / openssl.git / blobdiff