#ifndef USE_HOSTCC
#include <common.h>
+#include <env.h>
#include <watchdog.h>
#ifdef CONFIG_SHOW_BOOT_PROGRESS
#include <rtc.h>
-#include <environment.h>
+#include <gzip.h>
#include <image.h>
#include <mapmem.h>
#include <linux/errno.h>
#include <asm/io.h>
+#include <bzlib.h>
+#include <linux/lzo.h>
+#include <lzma/LzmaTypes.h>
+#include <lzma/LzmaDec.h>
+#include <lzma/LzmaTools.h>
+
#ifdef CONFIG_CMD_BDI
extern int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#endif
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
+#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
static const image_header_t *image_get_ramdisk(ulong rd_addr, uint8_t arch,
int verify);
#endif
#if defined(CONFIG_BOOTM_OPENRTOS) || defined(USE_HOSTCC)
{ IH_OS_OPENRTOS, "openrtos", "OpenRTOS", },
#endif
+ { IH_OS_OPENSBI, "opensbi", "RISC-V OpenSBI", },
{ -1, "", "", },
};
{ IH_TYPE_KERNEL_NOLOAD, "kernel_noload", "Kernel Image (no loading done)", },
{ IH_TYPE_KWBIMAGE, "kwbimage", "Kirkwood Boot Image",},
{ IH_TYPE_IMXIMAGE, "imximage", "Freescale i.MX Boot Image",},
+ { IH_TYPE_IMX8IMAGE, "imx8image", "NXP i.MX8 Boot Image",},
+ { IH_TYPE_IMX8MIMAGE, "imx8mimage", "NXP i.MX8M Boot Image",},
{ IH_TYPE_INVALID, "invalid", "Invalid Image", },
{ IH_TYPE_MULTI, "multi", "Multi-File Image", },
{ IH_TYPE_OMAPIMAGE, "omapimage", "TI OMAP SPL With GP CH",},
{ IH_TYPE_FIRMWARE_IVT, "firmware_ivt", "Firmware with HABv4 IVT" },
{ IH_TYPE_PMMC, "pmmc", "TI Power Management Micro-Controller Firmware",},
{ IH_TYPE_STM32IMAGE, "stm32image", "STMicroelectronics STM32 Image" },
+ { IH_TYPE_MTKIMAGE, "mtk_image", "MediaTek BootROM loadable Image" },
+ { IH_TYPE_COPRO, "copro", "Coprocessor Image"},
{ -1, "", "", },
};
}
}
+/**
+ * print_decomp_msg() - Print a suitable decompression/loading message
+ *
+ * @type: OS type (IH_OS_...)
+ * @comp_type: Compression type being used (IH_COMP_...)
+ * @is_xip: true if the load address matches the image start
+ */
+static void print_decomp_msg(int comp_type, int type, bool is_xip)
+{
+ const char *name = genimg_get_type_name(type);
+
+ if (comp_type == IH_COMP_NONE)
+ printf(" %s %s\n", is_xip ? "XIP" : "Loading", name);
+ else
+ printf(" Uncompressing %s\n", name);
+}
+
+int image_decomp(int comp, ulong load, ulong image_start, int type,
+ void *load_buf, void *image_buf, ulong image_len,
+ uint unc_len, ulong *load_end)
+{
+ int ret = 0;
+
+ *load_end = load;
+ print_decomp_msg(comp, type, load == image_start);
+
+ /*
+ * Load the image to the right place, decompressing if needed. After
+ * this, image_len will be set to the number of uncompressed bytes
+ * loaded, ret will be non-zero on error.
+ */
+ switch (comp) {
+ case IH_COMP_NONE:
+ if (load == image_start)
+ break;
+ if (image_len <= unc_len)
+ memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
+ else
+ ret = -ENOSPC;
+ break;
+#ifdef CONFIG_GZIP
+ case IH_COMP_GZIP: {
+ ret = gunzip(load_buf, unc_len, image_buf, &image_len);
+ break;
+ }
+#endif /* CONFIG_GZIP */
+#ifdef CONFIG_BZIP2
+ case IH_COMP_BZIP2: {
+ uint size = unc_len;
+
+ /*
+ * If we've got less than 4 MB of malloc() space,
+ * use slower decompression algorithm which requires
+ * at most 2300 KB of memory.
+ */
+ ret = BZ2_bzBuffToBuffDecompress(load_buf, &size,
+ image_buf, image_len,
+ CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
+ image_len = size;
+ break;
+ }
+#endif /* CONFIG_BZIP2 */
+#ifdef CONFIG_LZMA
+ case IH_COMP_LZMA: {
+ SizeT lzma_len = unc_len;
+
+ ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len,
+ image_buf, image_len);
+ image_len = lzma_len;
+ break;
+ }
+#endif /* CONFIG_LZMA */
+#ifdef CONFIG_LZO
+ case IH_COMP_LZO: {
+ size_t size = unc_len;
+
+ ret = lzop_decompress(image_buf, image_len, load_buf, &size);
+ image_len = size;
+ break;
+ }
+#endif /* CONFIG_LZO */
+#ifdef CONFIG_LZ4
+ case IH_COMP_LZ4: {
+ size_t size = unc_len;
+
+ ret = ulz4fn(image_buf, image_len, load_buf, &size);
+ image_len = size;
+ break;
+ }
+#endif /* CONFIG_LZ4 */
+ default:
+ printf("Unimplemented compression type %d\n", comp);
+ return -ENOSYS;
+ }
+
+ *load_end = load + image_len;
+
+ return ret;
+}
+
#ifndef USE_HOSTCC
-#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
+#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
/**
* image_get_ramdisk - get and verify ramdisk image
* @rd_addr: ramdisk image start address
memmove(to, from, len);
#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
}
+#else /* USE_HOSTCC */
+void memmove_wd(void *to, void *from, size_t len, ulong chunksz)
+{
+ memmove(to, from, len);
+}
#endif /* !USE_HOSTCC */
void genimg_print_size(uint32_t size)
*/
int genimg_get_format(const void *img_addr)
{
-#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
+#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
const image_header_t *hdr;
hdr = (const image_header_t *)img_addr;
{
ulong rd_addr, rd_load;
ulong rd_data, rd_len;
-#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
+#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
const image_header_t *rd_hdr;
#endif
void *buf;
*/
buf = map_sysmem(images->os.start, 0);
if (buf && genimg_get_format(buf) == IMAGE_FORMAT_ANDROID)
- select = argv[0];
+ select = (argc == 0) ? env_get("loadaddr") : argv[0];
#endif
if (argc >= 2)
*/
buf = map_sysmem(rd_addr, 0);
switch (genimg_get_format(buf)) {
-#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
+#if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
case IMAGE_FORMAT_LEGACY:
printf("## Loading init Ramdisk from Legacy "
"Image at %08lx ...\n", rd_addr);