* (C) Copyright 2001
* Denis Peter, MPL AG, d.peter@mpl.ch.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
* Floppy Disk support
#define PRINTF(fmt,args...)
#endif
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-
/*#if defined(CONFIG_CMD_DATE) */
/*#include <rtc.h> */
/*#endif */
-#if defined(CONFIG_CMD_FDC) || defined(CONFIG_CMD_FDOS)
-
-
typedef struct {
- int flags; /* connected drives ect */
- unsigned long blnr; /* Logical block nr */
- uchar drive; /* drive no */
- uchar cmdlen; /* cmd length */
- uchar cmd[16]; /* cmd desc */
- uchar dma; /* if > 0 dma enabled */
- uchar result[11];/* status information */
- uchar resultlen; /* lenght of result */
+ int flags; /* connected drives ect */
+ unsigned long blnr; /* Logical block nr */
+ uchar drive; /* drive no */
+ uchar cmdlen; /* cmd length */
+ uchar cmd[16]; /* cmd desc */
+ uchar dma; /* if > 0 dma enabled */
+ uchar result[11]; /* status information */
+ uchar resultlen; /* lenght of result */
} FDC_COMMAND_STRUCT;
+
/* flags: only the lower 8bit used:
* bit 0 if set drive 0 is present
* bit 1 if set drive 1 is present
* bit 7 if set disk in drive 4 is inserted
*/
-
/* cmd indexes */
-#define COMMAND 0
-#define DRIVE 1
+#define COMMAND 0
+#define DRIVE 1
#define CONFIG0 1
-#define SPEC_HUTSRT 1
-#define TRACK 2
+#define SPEC_HUTSRT 1
+#define TRACK 2
#define CONFIG1 2
#define SPEC_HLT 2
-#define HEAD 3
+#define HEAD 3
#define CONFIG2 3
-#define SECTOR 4
-#define SECTOR_SIZE 5
-#define LAST_TRACK 6
-#define GAP 7
-#define DTL 8
+#define SECTOR 4
+#define SECTOR_SIZE 5
+#define LAST_TRACK 6
+#define GAP 7
+#define DTL 8
/* result indexes */
-#define STATUS_0 0
-#define STATUS_PCN 1
-#define STATUS_1 1
-#define STATUS_2 2
-#define STATUS_TRACK 3
-#define STATUS_HEAD 4
-#define STATUS_SECT 5
-#define STATUS_SECT_SIZE 6
+#define STATUS_0 0
+#define STATUS_PCN 1
+#define STATUS_1 1
+#define STATUS_2 2
+#define STATUS_TRACK 3
+#define STATUS_HEAD 4
+#define STATUS_SECT 5
+#define STATUS_SECT_SIZE 6
/* Register addresses */
#define FDC_DIR FDC_BASE + 6 /* Digital Input Register */
#define FDC_CCR FDC_BASE + 7 /* Configuration Control */
/* Commands */
-#define FDC_CMD_SENSE_INT 0x08
-#define FDC_CMD_CONFIGURE 0x13
-#define FDC_CMD_SPECIFY 0x03
-#define FDC_CMD_RECALIBRATE 0x07
-#define FDC_CMD_READ 0x06
-#define FDC_CMD_READ_TRACK 0x02
-#define FDC_CMD_READ_ID 0x0A
-#define FDC_CMD_DUMP_REG 0x0E
-#define FDC_CMD_SEEK 0x0F
-
-#define FDC_CMD_SENSE_INT_LEN 0x01
-#define FDC_CMD_CONFIGURE_LEN 0x04
-#define FDC_CMD_SPECIFY_LEN 0x03
-#define FDC_CMD_RECALIBRATE_LEN 0x02
-#define FDC_CMD_READ_LEN 0x09
-#define FDC_CMD_READ_TRACK_LEN 0x09
-#define FDC_CMD_READ_ID_LEN 0x02
-#define FDC_CMD_DUMP_REG_LEN 0x01
-#define FDC_CMD_SEEK_LEN 0x03
-
-#define FDC_FIFO_THR 0x0C
-#define FDC_FIFO_DIS 0x00
+#define FDC_CMD_SENSE_INT 0x08
+#define FDC_CMD_CONFIGURE 0x13
+#define FDC_CMD_SPECIFY 0x03
+#define FDC_CMD_RECALIBRATE 0x07
+#define FDC_CMD_READ 0x06
+#define FDC_CMD_READ_TRACK 0x02
+#define FDC_CMD_READ_ID 0x0A
+#define FDC_CMD_DUMP_REG 0x0E
+#define FDC_CMD_SEEK 0x0F
+
+#define FDC_CMD_SENSE_INT_LEN 0x01
+#define FDC_CMD_CONFIGURE_LEN 0x04
+#define FDC_CMD_SPECIFY_LEN 0x03
+#define FDC_CMD_RECALIBRATE_LEN 0x02
+#define FDC_CMD_READ_LEN 0x09
+#define FDC_CMD_READ_TRACK_LEN 0x09
+#define FDC_CMD_READ_ID_LEN 0x02
+#define FDC_CMD_DUMP_REG_LEN 0x01
+#define FDC_CMD_SEEK_LEN 0x03
+
+#define FDC_FIFO_THR 0x0C
+#define FDC_FIFO_DIS 0x00
#define FDC_IMPLIED_SEEK 0x01
-#define FDC_POLL_DIS 0x00
-#define FDC_PRE_TRK 0x00
-#define FDC_CONFIGURE FDC_FIFO_THR | (FDC_POLL_DIS<<4) | (FDC_FIFO_DIS<<5) | (FDC_IMPLIED_SEEK << 6)
-#define FDC_MFM_MODE 0x01 /* MFM enable */
-#define FDC_SKIP_MODE 0x00 /* skip enable */
+#define FDC_POLL_DIS 0x00
+#define FDC_PRE_TRK 0x00
+#define FDC_CONFIGURE FDC_FIFO_THR | (FDC_POLL_DIS<<4) | (FDC_FIFO_DIS<<5) | (FDC_IMPLIED_SEEK << 6)
+#define FDC_MFM_MODE 0x01 /* MFM enable */
+#define FDC_SKIP_MODE 0x00 /* skip enable */
#define FDC_TIME_OUT 100000 /* time out */
#define FDC_RW_RETRIES 3 /* read write retries */
/* Disk structure */
typedef struct {
- unsigned int size; /* nr of sectors total */
- unsigned int sect; /* sectors per track */
- unsigned int head; /* nr of heads */
- unsigned int track; /* nr of tracks */
- unsigned int stretch; /* !=0 means double track steps */
- unsigned char gap; /* gap1 size */
- unsigned char rate; /* data rate. |= 0x40 for perpendicular */
- unsigned char spec1; /* stepping rate, head unload time */
- unsigned char fmt_gap; /* gap2 size */
- unsigned char hlt; /* head load time */
- unsigned char sect_code; /* Sector Size code */
- const char * name; /* used only for predefined formats */
+ unsigned int size; /* nr of sectors total */
+ unsigned int sect; /* sectors per track */
+ unsigned int head; /* nr of heads */
+ unsigned int track; /* nr of tracks */
+ unsigned int stretch; /* !=0 means double track steps */
+ unsigned char gap; /* gap1 size */
+ unsigned char rate; /* data rate. |= 0x40 for perpendicular */
+ unsigned char spec1; /* stepping rate, head unload time */
+ unsigned char fmt_gap;/* gap2 size */
+ unsigned char hlt; /* head load time */
+ unsigned char sect_code;/* Sector Size code */
+ const char * name; /* used only for predefined formats */
} FD_GEO_STRUCT;
static FDC_COMMAND_STRUCT cmd; /* global command struct */
/* If the boot drive number is undefined, we assume it's drive 0 */
-#ifndef CFG_FDC_DRIVE_NUMBER
-#define CFG_FDC_DRIVE_NUMBER 0
+#ifndef CONFIG_SYS_FDC_DRIVE_NUMBER
+#define CONFIG_SYS_FDC_DRIVE_NUMBER 0
#endif
/* Hardware access */
-#ifndef CFG_ISA_IO_STRIDE
-#define CFG_ISA_IO_STRIDE 1
+#ifndef CONFIG_SYS_ISA_IO_STRIDE
+#define CONFIG_SYS_ISA_IO_STRIDE 1
#endif
-#ifndef CFG_ISA_IO_OFFSET
-#define CFG_ISA_IO_OFFSET 0
-#endif
-
-
-#ifdef CONFIG_AMIGAONEG3SE
-unsigned char INT6_Status;
-
-void fdc_interrupt(void)
-{
- INT6_Status = 0x80;
-}
-
-/* waits for an interrupt (polling) */
-int wait_for_fdc_int(void)
-{
- unsigned long timeout;
- timeout = FDC_TIME_OUT;
- while(((volatile)INT6_Status & 0x80) == 0) {
- timeout--;
- udelay(10);
- if(timeout == 0) /* timeout occured */
- return FALSE;
- }
- INT6_Status = 0;
- return TRUE;
-}
+#ifndef CONFIG_SYS_ISA_IO_OFFSET
+#define CONFIG_SYS_ISA_IO_OFFSET 0
#endif
/* Supporting Functions */
unsigned char read_fdc_reg(unsigned int addr)
{
volatile unsigned char *val =
- (volatile unsigned char *)(CFG_ISA_IO_BASE_ADDRESS +
- (addr * CFG_ISA_IO_STRIDE) +
- CFG_ISA_IO_OFFSET);
+ (volatile unsigned char *)(CONFIG_SYS_ISA_IO_BASE_ADDRESS +
+ (addr * CONFIG_SYS_ISA_IO_STRIDE) +
+ CONFIG_SYS_ISA_IO_OFFSET);
return val [0];
}
void write_fdc_reg(unsigned int addr, unsigned char val)
{
volatile unsigned char *tmp =
- (volatile unsigned char *)(CFG_ISA_IO_BASE_ADDRESS +
- (addr * CFG_ISA_IO_STRIDE) +
- CFG_ISA_IO_OFFSET);
+ (volatile unsigned char *)(CONFIG_SYS_ISA_IO_BASE_ADDRESS +
+ (addr * CONFIG_SYS_ISA_IO_STRIDE) +
+ CONFIG_SYS_ISA_IO_OFFSET);
tmp[0]=val;
}
-#ifndef CONFIG_AMIGAONEG3SE
/* waits for an interrupt (polling) */
int wait_for_fdc_int(void)
{
timeout--;
udelay(10);
if(timeout==0) /* timeout occured */
- return FALSE;
+ return false;
}
- return TRUE;
+ return true;
}
-#endif
-
/* reads a byte from the FIFO of the FDC and checks direction and RQM bit
of the MSR. returns -1 if timeout, or byte if ok */
int read_fdc_byte(void)
c=(unsigned char)read_fdc_byte();
printf("Error: more output: %x\n",c);
}
- return TRUE;
+ return true;
}
udelay(10);
fdc_need_more_output();
if(timeout==0) /* timeout occured */
- return FALSE;
+ return false;
}
write_fdc_reg(FDC_FIFO,val);
- return TRUE;
+ return true;
}
/* sets up all FDC commands and issues it to the FDC. If
case FDC_CMD_CONFIGURE:
pCMD->cmd[CONFIG0]=0;
pCMD->cmd[CONFIG1]=FDC_CONFIGURE; /* FIFO Threshold, Poll, Enable FIFO */
- pCMD->cmd[CONFIG2]=FDC_PRE_TRK; /* Precompensation Track */
+ pCMD->cmd[CONFIG2]=FDC_PRE_TRK; /* Precompensation Track */
pCMD->cmdlen=FDC_CMD_CONFIGURE_LEN;
pCMD->resultlen=0; /* no result */
break;
}
for(i=0;i<pCMD->cmdlen;i++) {
/* PRINTF("write cmd%d = 0x%02X\n",i,pCMD->cmd[i]); */
- if(write_fdc_byte(pCMD->cmd[i])==FALSE) {
+ if (write_fdc_byte(pCMD->cmd[i]) == false) {
PRINTF("Error: timeout while issue cmd%d\n",i);
- return FALSE;
+ return false;
}
}
timeout=FDC_TIME_OUT;
timeout--;
if(timeout==0) {
PRINTF(" timeout while reading result%d MSR=0x%02X\n",i,read_fdc_reg(FDC_MSR));
- return FALSE;
+ return false;
}
}
pCMD->result[i]=(unsigned char)read_fdc_byte();
}
- return TRUE;
+ return true;
}
/* selects the drive assigned in the cmd structur and
int fdc_recalibrate(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
{
pCMD->cmd[COMMAND]=FDC_CMD_RECALIBRATE;
- if(fdc_issue_cmd(pCMD,pFG)==FALSE)
- return FALSE;
- while(wait_for_fdc_int()!=TRUE);
+ if (fdc_issue_cmd(pCMD, pFG) == false)
+ return false;
+ while (wait_for_fdc_int() != true);
+
pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT;
return(fdc_issue_cmd(pCMD,pFG));
}
int fdc_seek(FDC_COMMAND_STRUCT *pCMD,FD_GEO_STRUCT *pFG)
{
pCMD->cmd[COMMAND]=FDC_CMD_SEEK;
- if(fdc_issue_cmd(pCMD,pFG)==FALSE)
- return FALSE;
- while(wait_for_fdc_int()!=TRUE);
+ if (fdc_issue_cmd(pCMD, pFG) == false)
+ return false;
+ while (wait_for_fdc_int() != true);
+
pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT;
return(fdc_issue_cmd(pCMD,pFG));
}
-#ifndef CONFIG_AMIGAONEG3SE
/* terminates current command, by not servicing the FIFO
* waits for interrupt and fills in the result bytes */
int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
for(i=0;i<7;i++) {
pCMD->result[i]=(unsigned char)read_fdc_byte();
}
- return TRUE;
-}
-#endif
-#ifdef CONFIG_AMIGAONEG3SE
-int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
-{
- int i;
- for(i=0;i<100;i++)
- udelay(500); /* wait 500usec for fifo overrun */
- while((INT6_Status&0x80)==0x00); /* wait as long as no int has occured */
- for(i=0;i<7;i++) {
- pCMD->result[i]=(unsigned char)read_fdc_byte();
- }
- INT6_Status = 0;
- return TRUE;
+ return true;
}
-#endif
-
-#ifdef CONFIG_AMIGAONEG3SE
-#define disable_interrupts() 0
-#define enable_interrupts() (void)0
-#endif
-
/* reads data from FDC, seek commands are issued automatic */
int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
{
/* first seek to start address */
- unsigned long len,lastblk,readblk,i,timeout,ii,offset;
- unsigned char pcn,c,retriesrw,retriescal;
+ unsigned long len,readblk,i,timeout,ii,offset;
+ unsigned char c,retriesrw,retriescal;
unsigned char *bufferw; /* working buffer */
int sect_size;
int flags;
retriesrw=0;
retriescal=0;
offset=0;
- if(fdc_seek(pCMD,pFG)==FALSE) {
+ if (fdc_seek(pCMD, pFG) == false) {
stop_fdc_drive(pCMD);
- enable_interrupts();
- return FALSE;
+ if (flags)
+ enable_interrupts();
+ return false;
}
if((pCMD->result[STATUS_0]&0x20)!=0x20) {
printf("Seek error Status: %02X\n",pCMD->result[STATUS_0]);
stop_fdc_drive(pCMD);
- enable_interrupts();
- return FALSE;
+ if (flags)
+ enable_interrupts();
+ return false;
}
- pcn=pCMD->result[STATUS_PCN]; /* current track */
/* now determine the next seek point */
- lastblk=pCMD->blnr + blocks;
+ /* lastblk=pCMD->blnr + blocks; */
/* readblk=(pFG->head*pFG->sect)-(pCMD->blnr%(pFG->head*pFG->sect)); */
readblk=pFG->sect-(pCMD->blnr%pFG->sect);
PRINTF("1st nr of block possible read %ld start %ld\n",readblk,pCMD->blnr);
if(readblk>blocks) /* is end within 1st track */
readblk=blocks; /* yes, correct it */
PRINTF("we read %ld blocks start %ld\n",readblk,pCMD->blnr);
- bufferw=&buffer[0]; /* setup working buffer */
+ bufferw = &buffer[0]; /* setup working buffer */
do {
retryrw:
len=sect_size * readblk;
pCMD->cmd[COMMAND]=FDC_CMD_READ;
- if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
+ if (fdc_issue_cmd(pCMD, pFG) == false) {
stop_fdc_drive(pCMD);
- enable_interrupts();
- return FALSE;
+ if (flags)
+ enable_interrupts();
+ return false;
}
for (i=0;i<len;i++) {
timeout=FDC_TIME_OUT;
if(retriesrw++>FDC_RW_RETRIES) {
if (retriescal++>FDC_CAL_RETRIES) {
stop_fdc_drive(pCMD);
- enable_interrupts();
- return FALSE;
+ if (flags)
+ enable_interrupts();
+ return false;
}
else {
PRINTF(" trying to recalibrate Try %d\n",retriescal);
- if(fdc_recalibrate(pCMD,pFG)==FALSE) {
+ if (fdc_recalibrate(pCMD, pFG) == false) {
stop_fdc_drive(pCMD);
- enable_interrupts();
- return FALSE;
+ if (flags)
+ enable_interrupts();
+ return false;
}
retriesrw=0;
goto retrycal;
} /* else >FDC_RW_RETRIES */
}/* if output */
timeout--;
- }while(TRUE);
+ } while (true);
} /* for len */
/* the last sector of a track or all data has been read,
* we need to get the results */
fdc_terminate(pCMD);
offset+=(sect_size*readblk); /* set up buffer pointer */
- bufferw=&buffer[offset];
+ bufferw = &buffer[offset];
pCMD->blnr+=readblk; /* update current block nr */
blocks-=readblk; /* update blocks */
if(blocks==0)
readblk=blocks;
retrycal:
/* a seek is necessary */
- if(fdc_seek(pCMD,pFG)==FALSE) {
+ if (fdc_seek(pCMD, pFG) == false) {
stop_fdc_drive(pCMD);
- enable_interrupts();
- return FALSE;
+ if (flags)
+ enable_interrupts();
+ return false;
}
if((pCMD->result[STATUS_0]&0x20)!=0x20) {
PRINTF("Seek error Status: %02X\n",pCMD->result[STATUS_0]);
stop_fdc_drive(pCMD);
- return FALSE;
+ return false;
}
- pcn=pCMD->result[STATUS_PCN]; /* current track */
- }while(TRUE); /* start over */
+ } while (true); /* start over */
stop_fdc_drive(pCMD); /* switch off drive */
- enable_interrupts();
- return TRUE;
+ if (flags)
+ enable_interrupts();
+ return true;
}
-#ifdef CONFIG_AMIGAONEG3SE
-#undef disable_interrupts()
-#undef enable_interrupts()
-#endif
-
/* Scan all drives and check if drive is present and disk is inserted */
int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
{
pCMD->drive=drives;
select_fdc_drive(pCMD);
pCMD->blnr=0; /* set to the 1st block */
- if(fdc_recalibrate(pCMD,pFG)==FALSE)
+ if (fdc_recalibrate(pCMD, pFG) == false)
continue;
if((pCMD->result[STATUS_0]&0x10)==0x10)
continue;
/* ok drive connected check for disk */
state|=(1<<drives);
pCMD->blnr=pFG->size; /* set to the last block */
- if(fdc_seek(pCMD,pFG)==FALSE)
+ if (fdc_seek(pCMD, pFG) == false)
continue;
pCMD->blnr=0; /* set to the 1st block */
- if(fdc_recalibrate(pCMD,pFG)==FALSE)
+ if (fdc_recalibrate(pCMD, pFG) == false)
continue;
pCMD->cmd[COMMAND]=FDC_CMD_READ_ID;
- if(fdc_issue_cmd(pCMD,pFG)==FALSE)
+ if (fdc_issue_cmd(pCMD, pFG) == false)
continue;
state|=(0x10<<drives);
}
((state&(0x10<<i))==(0x10<<i)) ? pFG->name : "");
}
pCMD->flags=state;
- return TRUE;
+ return true;
}
{
int i;
-#ifdef CONFIG_AMIGAONEG3SE
- irq_install_handler(6, (interrupt_handler_t *)fdc_interrupt, NULL);
- i8259_unmask_irq(6);
-#endif
-
-#ifdef CFG_FDC_HW_INIT
+#ifdef CONFIG_SYS_FDC_HW_INIT
fdc_hw_init ();
#endif
/* first, we reset the FDC via the DOR */
write_fdc_reg(FDC_CCR,pFG->rate);
/* then initialize the DSR */
write_fdc_reg(FDC_DSR,pFG->rate);
- if(wait_for_fdc_int()==FALSE) {
+ if (wait_for_fdc_int() == false) {
PRINTF("Time Out after writing CCR\n");
- return FALSE;
+ return false;
}
/* now issue sense Interrupt and status command
* assuming only one drive present (drive 0) */
for(i=0;i<4;i++) {
/* issue sense interrupt for all 4 possible drives */
pCMD->cmd[COMMAND]=FDC_CMD_SENSE_INT;
- if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
+ if (fdc_issue_cmd(pCMD, pFG) == false) {
PRINTF("Sense Interrupt for drive %d failed\n",i);
}
}
pCMD->drive=drive;
select_fdc_drive(pCMD);
pCMD->cmd[COMMAND]=FDC_CMD_CONFIGURE;
- if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
+ if (fdc_issue_cmd(pCMD, pFG) == false) {
PRINTF(" configure timeout\n");
stop_fdc_drive(pCMD);
- return FALSE;
+ return false;
}
/* issue specify command */
pCMD->cmd[COMMAND]=FDC_CMD_SPECIFY;
- if(fdc_issue_cmd(pCMD,pFG)==FALSE) {
+ if (fdc_issue_cmd(pCMD, pFG) == false) {
PRINTF(" specify timeout\n");
stop_fdc_drive(pCMD);
- return FALSE;
+ return false;
}
/* then, we clear the reset in the DOR */
/* fdc_check_drive(pCMD,pFG); */
/* write_fdc_reg(FDC_DOR,0x04); */
- return TRUE;
+ return true;
}
-#endif
#if defined(CONFIG_CMD_FDOS)
FDC_COMMAND_STRUCT *pCMD = &cmd;
/* setup FDC and scan for drives */
- if(fdc_setup(drive,pCMD,pFG)==FALSE) {
+ if (fdc_setup(drive, pCMD, pFG) == false) {
printf("\n** Error in setup FDC **\n");
- return FALSE;
+ return false;
}
- if(fdc_check_drive(pCMD,pFG)==FALSE) {
+ if (fdc_check_drive(pCMD, pFG) == false) {
printf("\n** Error in check_drives **\n");
- return FALSE;
+ return false;
}
if((pCMD->flags&(1<<drive))==0) {
/* drive not available */
printf("\n** Drive %d not available **\n",drive);
- return FALSE;
+ return false;
}
if((pCMD->flags&(0x10<<drive))==0) {
/* no disk inserted */
printf("\n** No disk inserted in drive %d **\n",drive);
- return FALSE;
+ return false;
}
/* ok, we have a valid source */
pCMD->drive=drive;
/* read first block */
pCMD->blnr=0;
- return TRUE;
+ return true;
}
/**************************************************************************
* int fdc_fdos_seek
/****************************************************************************
* main routine do_fdcboot
*/
-int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
FD_GEO_STRUCT *pFG = (FD_GEO_STRUCT *)floppy_type;
FDC_COMMAND_STRUCT *pCMD = &cmd;
image_header_t *hdr; /* used for fdc boot */
unsigned char boot_drive;
int i,nrofblk;
- char *ep;
- int rcode = 0;
#if defined(CONFIG_FIT)
- const void *fit_hdr;
+ const void *fit_hdr = NULL;
#endif
switch (argc) {
case 1:
- addr = CFG_LOAD_ADDR;
- boot_drive=CFG_FDC_DRIVE_NUMBER;
+ addr = CONFIG_SYS_LOAD_ADDR;
+ boot_drive=CONFIG_SYS_FDC_DRIVE_NUMBER;
break;
case 2:
addr = simple_strtoul(argv[1], NULL, 16);
- boot_drive=CFG_FDC_DRIVE_NUMBER;
+ boot_drive=CONFIG_SYS_FDC_DRIVE_NUMBER;
break;
case 3:
addr = simple_strtoul(argv[1], NULL, 16);
boot_drive=simple_strtoul(argv[2], NULL, 10);
break;
default:
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
+ return CMD_RET_USAGE;
}
/* setup FDC and scan for drives */
- if(fdc_setup(boot_drive,pCMD,pFG)==FALSE) {
+ if (fdc_setup(boot_drive, pCMD, pFG) == false) {
printf("\n** Error in setup FDC **\n");
return 1;
}
- if(fdc_check_drive(pCMD,pFG)==FALSE) {
+ if (fdc_check_drive(pCMD, pFG) == false) {
printf("\n** Error in check_drives **\n");
return 1;
}
pCMD->drive=boot_drive;
/* read first block */
pCMD->blnr=0;
- if(fdc_read_data((unsigned char *)addr,1,pCMD,pFG)==FALSE) {
+ if (fdc_read_data((unsigned char *)addr, 1, pCMD, pFG) == false) {
printf("\nRead error:");
for(i=0;i<7;i++)
printf("result%d: 0x%02X\n",i,pCMD->result[i]);
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
fit_hdr = (const void *)addr;
- if (!fit_check_format (fit_hdr)) {
- puts ("** Bad FIT image format\n");
- return 1;
- }
puts ("Fit image detected...\n");
imsize = fit_get_size (fit_hdr);
nrofblk++;
printf("Loading %ld Bytes (%d blocks) at 0x%08lx..\n",imsize,nrofblk,addr);
pCMD->blnr=0;
- if(fdc_read_data((unsigned char *)addr,nrofblk,pCMD,pFG)==FALSE) {
+ if (fdc_read_data((unsigned char *)addr, nrofblk, pCMD, pFG) == false) {
/* read image block */
printf("\nRead error:");
for(i=0;i<7;i++)
#if defined(CONFIG_FIT)
/* This cannot be done earlier, we need complete FIT image in RAM first */
- if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT)
- fit_print_contents ((const void *)addr);
+ if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) {
+ if (!fit_check_format (fit_hdr)) {
+ puts ("** Bad FIT image format\n");
+ return 1;
+ }
+ fit_print_contents (fit_hdr);
+ }
#endif
/* Loading ok, update default load address */
load_addr = addr;
- /* Check if we should attempt an auto-start */
- if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
- char *local_args[2];
- extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
-
- local_args[0] = argv[0];
- local_args[1] = NULL;
-
- printf ("Automatic boot of image at addr 0x%08lX ...\n", addr);
-
- do_bootm (cmdtp, 0, 1, local_args);
- rcode ++;
- }
- return rcode;
+ return bootm_maybe_autostart(cmdtp, argv[0]);
}
-
-#endif
-
-
-/***************************************************/
-
-
-#if defined(CONFIG_CMD_FDC)
-
U_BOOT_CMD(
fdcboot, 3, 1, do_fdcboot,
- "fdcboot - boot from floppy device\n",
- "loadAddr drive\n"
+ "boot from floppy device",
+ "loadAddr drive"
);
#endif