#include <common.h>
#include <bootstage.h>
#include <bzlib.h>
+#include <errno.h>
#include <fdt_support.h>
#include <lmb.h>
#include <malloc.h>
{
const void *os_hdr;
bool ep_found = false;
+ int ret;
/* get kernel image header, start address and length */
os_hdr = boot_get_kernel(cmdtp, flag, argc, argv,
images.os.end = image_get_image_end(os_hdr);
images.os.load = image_get_load(os_hdr);
+ images.os.arch = image_get_arch(os_hdr);
break;
#endif
#if defined(CONFIG_FIT)
return 1;
}
+ if (fit_image_get_arch(images.fit_hdr_os,
+ images.fit_noffset_os,
+ &images.os.arch)) {
+ puts("Can't get image ARCH!\n");
+ return 1;
+ }
+
images.os.end = fit_get_end(images.fit_hdr_os);
if (fit_image_get_load(images.fit_hdr_os, images.fit_noffset_os,
images.os.type = IH_TYPE_KERNEL;
images.os.comp = IH_COMP_NONE;
images.os.os = IH_OS_LINUX;
- images.ep = images.os.load;
- ep_found = true;
images.os.end = android_image_get_end(os_hdr);
images.os.load = android_image_get_kload(os_hdr);
+ images.ep = images.os.load;
+ ep_found = true;
break;
#endif
default:
return 1;
}
- /* find kernel entry point */
- if (images.legacy_hdr_valid) {
+ /* If we have a valid setup.bin, we will use that for entry (x86) */
+ if (images.os.arch == IH_ARCH_I386 ||
+ images.os.arch == IH_ARCH_X86_64) {
+ ulong len;
+
+ ret = boot_get_setup(&images, IH_ARCH_I386, &images.ep, &len);
+ if (ret < 0 && ret != -ENOENT) {
+ puts("Could not find a valid setup.bin for x86\n");
+ return 1;
+ }
+ /* Kernel entry point is the setup.bin */
+ } else if (images.legacy_hdr_valid) {
images.ep = image_get_ep(&images.legacy_hdr_os_copy);
#if defined(CONFIG_FIT)
} else if (images.fit_uname_os) {
return 1;
}
- set_working_fdt_addr(images.ft_addr);
+ set_working_fdt_addr((ulong)images.ft_addr);
return 0;
}
return 0;
}
-#endif /* USE_HOSTCC */
+#endif /* USE_HOSTC */
/**
- * decomp_image() - decompress the operating system
+ * print_decomp_msg() - Print a suitable decompression/loading message
*
- * @comp: Compression algorithm that is used (IH_COMP_...)
- * @load: Destination load address in U-Boot memory
- * @image_start Image start address (where we are decompressing from)
* @type: OS type (IH_OS_...)
- * @load_bug: Place to decompress to
- * @image_buf: Address to decompress from
- * @return 0 if OK, -ve on error (BOOTM_ERR_...)
+ * @comp_type: Compression type being used (IH_COMP_...)
+ * @is_xip: true if the load address matches the image start
*/
-static int decomp_image(int comp, ulong load, ulong image_start, int type,
- void *load_buf, void *image_buf, ulong image_len,
- ulong *load_end)
+static void print_decomp_msg(int comp_type, int type, bool is_xip)
{
- const char *type_name = genimg_get_type_name(type);
- __attribute__((unused)) uint unc_len = CONFIG_SYS_BOOTM_LEN;
+ const char *name = genimg_get_type_name(type);
+
+ if (comp_type == IH_COMP_NONE)
+ printf(" %s %s ... ", is_xip ? "XIP" : "Loading", name);
+ else
+ printf(" Uncompressing %s ... ", name);
+}
+
+/**
+ * handle_decomp_error() - display a decompression error
+ *
+ * This function tries to produce a useful message. In the case where the
+ * uncompressed size is the same as the available space, we can assume that
+ * the image is too large for the buffer.
+ *
+ * @comp_type: Compression type being used (IH_COMP_...)
+ * @uncomp_size: Number of bytes uncompressed
+ * @unc_len: Amount of space available for decompression
+ * @ret: Error code to report
+ * @return BOOTM_ERR_RESET, indicating that the board must be reset
+ */
+static int handle_decomp_error(int comp_type, size_t uncomp_size,
+ size_t unc_len, int ret)
+{
+ const char *name = genimg_get_comp_name(comp_type);
+
+ if (uncomp_size >= unc_len)
+ printf("Image too large: increase CONFIG_SYS_BOOTM_LEN\n");
+ else
+ printf("%s: uncompress error %d\n", name, ret);
+
+ /*
+ * The decompression routines are now safe, so will not write beyond
+ * their bounds. Probably it is not necessary to reset, but maintain
+ * the current behaviour for now.
+ */
+ printf("Must RESET board to recover\n");
+#ifndef USE_HOSTCC
+ bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
+#endif
+
+ return BOOTM_ERR_RESET;
+}
+
+int bootm_decomp_image(int comp, ulong load, ulong image_start, int type,
+ void *load_buf, void *image_buf, ulong image_len,
+ uint unc_len, ulong *load_end)
+{
+ int ret = 0;
*load_end = load;
+ print_decomp_msg(comp, type, load == image_start);
+
+ /*
+ * Load the image to the right place, decompressing if needed. After
+ * this, image_len will be set to the number of uncompressed bytes
+ * loaded, ret will be non-zero on error.
+ */
switch (comp) {
case IH_COMP_NONE:
- if (load == image_start) {
- printf(" XIP %s ... ", type_name);
- } else {
- printf(" Loading %s ... ", type_name);
+ if (load == image_start)
+ break;
+ if (image_len <= unc_len)
memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
- }
- *load_end = load + image_len;
+ else
+ ret = 1;
break;
#ifdef CONFIG_GZIP
- case IH_COMP_GZIP:
- printf(" Uncompressing %s ... ", type_name);
- if (gunzip(load_buf, unc_len, image_buf, &image_len) != 0) {
- puts("GUNZIP: uncompress, out-of-mem or overwrite error - must RESET board to recover\n");
- return BOOTM_ERR_RESET;
- }
-
- *load_end = load + image_len;
+ case IH_COMP_GZIP: {
+ ret = gunzip(load_buf, unc_len, image_buf, &image_len);
break;
+ }
#endif /* CONFIG_GZIP */
#ifdef CONFIG_BZIP2
- case IH_COMP_BZIP2:
- printf(" Uncompressing %s ... ", type_name);
+ case IH_COMP_BZIP2: {
+ uint size = unc_len;
+
/*
* If we've got less than 4 MB of malloc() space,
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
- int i = BZ2_bzBuffToBuffDecompress(load_buf, &unc_len,
+ ret = BZ2_bzBuffToBuffDecompress(load_buf, &size,
image_buf, image_len,
CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
- if (i != BZ_OK) {
- printf("BUNZIP2: uncompress or overwrite error %d - must RESET board to recover\n",
- i);
- return BOOTM_ERR_RESET;
- }
-
- *load_end = load + unc_len;
+ image_len = size;
break;
+ }
#endif /* CONFIG_BZIP2 */
#ifdef CONFIG_LZMA
case IH_COMP_LZMA: {
SizeT lzma_len = unc_len;
- int ret;
-
- printf(" Uncompressing %s ... ", type_name);
ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len,
image_buf, image_len);
- unc_len = lzma_len;
- if (ret != SZ_OK) {
- printf("LZMA: uncompress or overwrite error %d - must RESET board to recover\n",
- ret);
- bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
- return BOOTM_ERR_RESET;
- }
- *load_end = load + unc_len;
+ image_len = lzma_len;
break;
}
#endif /* CONFIG_LZMA */
#ifdef CONFIG_LZO
case IH_COMP_LZO: {
size_t size = unc_len;
- int ret;
-
- printf(" Uncompressing %s ... ", type_name);
ret = lzop_decompress(image_buf, image_len, load_buf, &size);
- if (ret != LZO_E_OK) {
- printf("LZO: uncompress or overwrite error %d - must RESET board to recover\n",
- ret);
- return BOOTM_ERR_RESET;
- }
-
- *load_end = load + size;
+ image_len = size;
break;
}
#endif /* CONFIG_LZO */
return BOOTM_ERR_UNIMPLEMENTED;
}
+ if (ret)
+ return handle_decomp_error(comp, image_len, unc_len, ret);
+ *load_end = load + image_len;
+
puts("OK\n");
return 0;
load_buf = map_sysmem(load, 0);
image_buf = map_sysmem(os.image_start, image_len);
- err = decomp_image(os.comp, load, os.image_start, os.type, load_buf,
- image_buf, image_len, load_end);
+ err = bootm_decomp_image(os.comp, load, os.image_start, os.type,
+ load_buf, image_buf, image_len,
+ CONFIG_SYS_BOOTM_LEN, load_end);
if (err) {
bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
return err;
int os_noffset;
#endif
- img_addr = genimg_get_kernel_addr_fit(argv[0], &fit_uname_config,
- &fit_uname_kernel);
+ img_addr = genimg_get_kernel_addr_fit(argc < 1 ? NULL : argv[0],
+ &fit_uname_config,
+ &fit_uname_kernel);
bootstage_mark(BOOTSTAGE_ID_CHECK_MAGIC);
/* Allow the image to expand by a factor of 4, should be safe */
load_buf = malloc((1 << 20) + len * 4);
- ret = decomp_image(imape_comp, 0, data, image_type, load_buf,
- (void *)data, len, &load_end);
+ ret = bootm_decomp_image(imape_comp, 0, data, image_type, load_buf,
+ (void *)data, len, CONFIG_SYS_BOOTM_LEN,
+ &load_end);
free(load_buf);
+
if (ret && ret != BOOTM_ERR_UNIMPLEMENTED)
return ret;