dts: switch spi-flash to jedec, spi-nor compatible

[oweals/u-boot.git] / common / board_r.c

diff --git a/common/board_r.c b/common/board_r.c
index 6949d4af0e319a3acd2adbc653c1fb6ae575e9d7..472987d5d52f83e64d62a892c4adc4ca9db3a4c2 100644 (file)
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -36,7 +36,6 @@
 #include <onenand_uboot.h>
 #include <scsi.h>
 #include <serial.h>
-#include <spi.h>
 #include <stdio_dev.h>
 #include <timer.h>
 #include <trace.h>
@@ -140,15 +139,12 @@ static int initr_reloc_global_data(void)
         */
        fixup_cpu();
 #endif
-#ifdef CONFIG_SYS_EXTRA_ENV_RELOC
+#if !defined(CONFIG_ENV_ADDR) || defined(ENV_IS_EMBEDDED)
        /*
-        * Some systems need to relocate the env_addr pointer early because the
-        * location it points to will get invalidated before env_relocate is
-        * called.  One example is on systems that might use a L2 or L3 cache
-        * in SRAM mode and initialize that cache from SRAM mode back to being
-        * a cache in cpu_init_r.
+        * Relocate the early env_addr pointer unless we know it is not inside
+        * the binary. Some systems need this and for the rest, it doesn't hurt.
         */
-       gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
+       gd->env_addr += gd->reloc_off;
 #endif
 #ifdef CONFIG_OF_EMBED
        /*
@@ -382,20 +378,6 @@ static int initr_flash(void)
 }
 #endif
 
-#if defined(CONFIG_PPC) && !defined(CONFIG_DM_SPI)
-static int initr_spi(void)
-{
-       /* MPC8xx does this here */
-#ifdef CONFIG_MPC8XX_SPI
-#if !defined(CONFIG_ENV_IS_IN_EEPROM)
-       spi_init_f();
-#endif
-       spi_init_r();
-#endif
-       return 0;
-}
-#endif
-
 #ifdef CONFIG_CMD_NAND
 /* go init the NAND */
 static int initr_nand(void)
@@ -454,9 +436,10 @@ static int initr_env(void)
        if (should_load_env())
                env_relocate();
        else
-               set_default_env(NULL);
+               set_default_env(NULL, 0);
 #ifdef CONFIG_OF_CONTROL
-       env_set_addr("fdtcontroladdr", gd->fdt_blob);
+       env_set_hex("fdtcontroladdr",
+                   (unsigned long)map_to_sysmem(gd->fdt_blob));
 #endif
 
        /* Initialize from environment */
@@ -553,6 +536,7 @@ static int initr_scsi(void)
 {
        puts("SCSI:  ");
        scsi_init();
+       puts("\n");
 
        return 0;
 }
@@ -649,10 +633,7 @@ static int run_main_loop(void)
 }
 
 /*
- * Over time we hope to remove these functions with code fragments and
- * stub functions, and instead call the relevant function directly.
- *
- * We also hope to remove most of the driver-related init and do it if/when
+ * We hope to remove most of the driver-related init and do it if/when
  * the driver is later used.
  *
  * TODO: perhaps reset the watchdog in the initcall function after each call?
@@ -689,7 +670,8 @@ static init_fnc_t init_sequence_r[] = {
 #ifdef CONFIG_DM
        initr_dm,
 #endif
-#if defined(CONFIG_ARM) || defined(CONFIG_NDS32) || defined(CONFIG_RISCV)
+#if defined(CONFIG_ARM) || defined(CONFIG_NDS32) || defined(CONFIG_RISCV) || \
+       defined(CONFIG_SANDBOX)
        board_init,     /* Setup chipselects */
 #endif
        /*
@@ -744,9 +726,6 @@ static init_fnc_t init_sequence_r[] = {
        /* initialize higher level parts of CPU like time base and timers */
        cpu_init_r,
 #endif
-#ifdef CONFIG_PPC
-       initr_spi,
-#endif
 #ifdef CONFIG_CMD_NAND
        initr_nand,
 #endif