Revert "video: mxsfb: Configure the clock after eLCDIF reset"

[oweals/u-boot.git] / common / Makefile

diff --git a/common/Makefile b/common/Makefile
index 7011dada99377c70ade39f5b361564077828fa9b..302d8beaf356aad14f7ebd7f3e9c7eed711d3545 100644 (file)
--- a/common/Makefile
+++ b/common/Makefile
@@ -1,9 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
 #
 # (C) Copyright 2004-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
 
 # core
 ifndef CONFIG_SPL_BUILD
@@ -31,12 +29,11 @@ obj-$(CONFIG_CMD_BOOTI) += bootm.o bootm_os.o
 
 obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
-
 obj-$(CONFIG_MII) += miiphyutil.o
 obj-$(CONFIG_CMD_MII) += miiphyutil.o
 obj-$(CONFIG_PHYLIB) += miiphyutil.o
 
-ifdef CONFIG_CMD_USB
+ifdef CONFIG_USB
 obj-y += usb.o usb_hub.o
 obj-$(CONFIG_USB_STORAGE) += usb_storage.o
 endif
@@ -64,22 +61,28 @@ obj-$(CONFIG_CMDLINE) += cli_readline.o cli_simple.o
 endif # !CONFIG_SPL_BUILD
 
 obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o
+obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o
 
 ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_DFU_SUPPORT
+ifdef CONFIG_SPL_DFU
 obj-$(CONFIG_DFU_OVER_USB) += dfu.o
 endif
-obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o
 obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
+obj-$(CONFIG_TPL_HASH_SUPPORT) += hash.o
 obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
 obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
 obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
+
 ifdef CONFIG_SPL_USB_HOST_SUPPORT
-obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
-obj-$(CONFIG_USB_STORAGE) += usb_storage.o
-endif
+obj-y += usb.o
+obj-y += usb_hub.o
+obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o
+else
+obj-$(CONFIG_USB_MUSB_HOST) += usb.o
 endif
+endif # CONFIG_SPL_BUILD
+
 #others
 obj-$(CONFIG_DDR_SPD) += ddr_spd.o
 obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o
@@ -93,15 +96,18 @@ obj-$(CONFIG_SPL_SERIAL_SUPPORT) += console.o
 endif
 else
 obj-y += console.o
-endif
+endif # CONFIG_SPL_BUILD
+
 obj-$(CONFIG_CROS_EC) += cros_ec.o
 obj-y += dlmalloc.o
 ifdef CONFIG_SYS_MALLOC_F
-ifneq ($(CONFIG_$(SPL_)SYS_MALLOC_F_LEN),0)
+ifneq ($(CONFIG_$(SPL_TPL_)SYS_MALLOC_F_LEN),0)
 obj-y += malloc_simple.o
 endif
 endif
+
 obj-y += image.o
+obj-$(CONFIG_ANDROID_AB) += android_ab.o
 obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o
 obj-$(CONFIG_$(SPL_TPL_)FIT) += image-fit.o
@@ -111,18 +117,7 @@ obj-$(CONFIG_IO_TRACE) += iotrace.o
 obj-y += memsize.o
 obj-y += stdio.o
 
-ifndef CONFIG_SPL_BUILD
-# This option is not just y/n - it can have a numeric value
-ifdef CONFIG_FASTBOOT_FLASH
-obj-y += image-sparse.o
-ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
-obj-y += fb_mmc.o
-endif
-ifdef CONFIG_FASTBOOT_FLASH_NAND_DEV
-obj-y += fb_nand.o
-endif
-endif
-endif
+obj-$(CONFIG_CMD_DTIMG) += image-android-dt.o
 
 ifdef CONFIG_CMD_EEPROM_LAYOUT
 obj-y += eeprom/eeprom_field.o eeprom/eeprom_layout.o
@@ -130,9 +125,13 @@ endif
 
 obj-y += cli.o
 obj-$(CONFIG_FSL_DDR_INTERACTIVE) += cli_simple.o cli_readline.o
+obj-$(CONFIG_STM32MP1_DDR_INTERACTIVE) += cli_simple.o cli_readline.o
 obj-$(CONFIG_DFU_OVER_USB) += dfu.o
 obj-y += command.o
-obj-$(CONFIG_$(SPL_)LOG) += log.o
-obj-$(CONFIG_$(SPL_)LOG_CONSOLE) += log_console.o
+obj-$(CONFIG_$(SPL_TPL_)LOG) += log.o
+obj-$(CONFIG_$(SPL_TPL_)LOG_CONSOLE) += log_console.o
 obj-y += s_record.o
-obj-y += xyzModem.o
+obj-$(CONFIG_CMD_LOADB) += xyzModem.o
+obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += xyzModem.o
+
+obj-$(CONFIG_AVB_VERIFY) += avb_verify.o