menu "Command line interface"
- depends on !SPL_BUILD
+
+config HUSH_PARSER
+ bool "Use hush shell"
+ select SYS_HUSH_PARSER
+ help
+ This option enables the "hush" shell (from Busybox) as command line
+ interpreter, thus enabling powerful command line syntax like
+ if...then...else...fi conditionals or `&&' and '||'
+ constructs ("shell scripts").
+
+ If disabled, you get the old, much simpler behaviour with a somewhat
+ smaller memory footprint.
+
+config SYS_HUSH_PARSER
+ bool
+ help
+ Backward compatibility.
+
+comment "Commands"
+
+menu "Info commands"
+
+config CMD_BDI
+ bool "bdinfo"
+ help
+ Print board info
+
+config CMD_CONSOLE
+ bool "coninfo"
+ help
+ Print console devices and information.
+
+config CMD_LICENSE
+ bool "license"
+ help
+ Print GPL license text
+
+endmenu
+
+menu "Boot commands"
+
+config CMD_BOOTD
+ bool "bootd"
+ help
+ Run the command stored in the environment "bootcmd", i.e.
+ "bootd" does the same thing as "run bootcmd".
config CMD_BOOTM
- bool "Enable bootm command"
+ bool "bootm"
default y
help
Boot an application image from the memory.
+config CMD_GO
+ bool "go"
+ default y
+ help
+ Start an application at a given address.
+
+config CMD_RUN
+ bool "run"
+ help
+ Run the command in the given environment variable.
+
+config CMD_IMI
+ bool "iminfo"
+ help
+ Print header information for application image.
+
+config CMD_IMLS
+ bool "imls"
+ help
+ List all images found in flash
+
+config CMD_XIMG
+ bool "imxtract"
+ help
+ Extract a part of a multi-image.
+
+endmenu
+
+menu "Environment commands"
+
+config CMD_EXPORTENV
+ bool "env export"
+ default y
+ help
+ Export environments.
+
+config CMD_IMPORTENV
+ bool "env import"
+ default y
+ help
+ Import environments.
+
+config CMD_EDITENV
+ bool "editenv"
+ help
+ Edit environment variable.
+
+config CMD_SAVEENV
+ bool "saveenv"
+ help
+ Run the command in the given environment variable.
+
+endmenu
+
+menu "Memory commands"
+
+config CMD_MEMORY
+ bool "md, mm, nm, mw, cp, cmp, base, loop"
+ help
+ Memeory commands.
+ md - memory display
+ mm - memory modify (auto-incrementing address)
+ nm - memory modify (constant address)
+ mw - memory write (fill)
+ cp - memory copy
+ cmp - memory compare
+ base - print or set address offset
+ loop - initinite loop on address range
+
+config CMD_CRC32
+ bool "crc32"
+ default y
+ help
+ Compute CRC32.
+
+config LOOPW
+ bool "loopw"
+ help
+ Infinite write loop on address range
+
+config CMD_MEMTEST
+ bool "crc32"
+ help
+ Simple RAM read/write test.
+
+config CMD_MX_CYCLIC
+ bool "mdc, mwc"
+ help
+ mdc - memory display cyclic
+ mwc - memory write cyclic
+
+config CMD_MEMINFO
+ bool "meminfo"
+ help
+ Display memory information.
+
+endmenu
+
+menu "Device access commands"
+
+config CMD_DM
+ bool "dm - Access to driver model information"
+ depends on DM
+ default y
+ help
+ Provides access to driver model data structures and information,
+ such as a list of devices, list of uclasses and the state of each
+ device (e.g. activated). This is not required for operation, but
+ can be useful to see the state of driver model for debugging or
+ interest.
+
+config CMD_DEMO
+ bool "demo - Demonstration commands for driver model"
+ depends on DM
+ help
+ Provides a 'demo' command which can be used to play around with
+ driver model. To use this properly you will need to enable one or
+ both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
+ Otherwise you will always get an empty list of devices. The demo
+ devices are defined in the sandbox device tree, so the easiest
+ option is to use sandbox and pass the -d point to sandbox's
+ u-boot.dtb file.
+
+config CMD_LOADB
+ bool "loadb"
+ help
+ Load a binary file over serial line.
+
+config CMD_LOADS
+ bool "loads"
+ help
+ Load an S-Record file over serial line
+
+config CMD_FLASH
+ bool "flinfo, erase, protect"
+ help
+ NOR flash support.
+ flinfo - print FLASH memory information
+ erase - FLASH memory
+ protect - enable or disable FLASH write protection
+
+config CMD_NAND
+ bool "nand"
+ help
+ NAND support.
+
+config CMD_SPI
+ bool "sspi"
+ help
+ SPI utility command.
+
+config CMD_I2C
+ bool "i2c"
+ help
+ I2C support.
+
+config CMD_USB
+ bool "usb"
+ help
+ USB support.
+
+config CMD_FPGA
+ bool "fpga"
+ help
+ FPGA support.
+
+endmenu
+
+
+menu "Shell scripting commands"
+
+config CMD_ECHO
+ bool "echo"
+ help
+ Echo args to console
+
+config CMD_ITEST
+ bool "itest"
+ help
+ Return true/false on integer compare.
+
+config CMD_SOURCE
+ bool "source"
+ help
+ Run script from memory
+
+endmenu
+
+menu "Network commands"
+
+config CMD_NET
+ bool "bootp, tftpboot"
+ help
+ Network commands.
+ bootp - boot image via network using BOOTP/TFTP protocol
+ tftpboot - boot image via network using TFTP protocol
+
+config CMD_TFTPPUT
+ bool "tftp put"
+ help
+ TFTP put command, for uploading files to a server
+
+config CMD_TFTPSRV
+ bool "tftpsrv"
+ help
+ Act as a TFTP server and boot the first received file
+
+config CMD_RARP
+ bool "rarpboot"
+ help
+ Boot image via network using RARP/TFTP protocol
+
+config CMD_DHCP
+ bool "dhcp"
+ help
+ Boot image via network using DHCP/TFTP protocol
+
+config CMD_NFS
+ bool "nfs"
+ help
+ Boot image via network using NFS protocol.
+
+config CMD_PING
+ bool "ping"
+ help
+ Send ICMP ECHO_REQUEST to network host
+
+config CMD_CDP
+ bool "cdp"
+ help
+ Perform CDP network configuration
+
+config CMD_SNTP
+ bool "sntp"
+ help
+ Synchronize RTC via network
+
+config CMD_DNS
+ bool "dns"
+ help
+ Lookup the IP of a hostname
+
+config CMD_DNS
+ bool "dns"
+ help
+ Lookup the IP of a hostname
+
+config CMD_LINK_LOCAL
+ bool "linklocal"
+ help
+ Acquire a network IP address using the link-local protocol
+
+endmenu
+
+menu "Misc commands"
+
+config CMD_TIME
+ bool "time"
+ help
+ Run commands and summarize execution time.
+
+# TODO: rename to CMD_SLEEP
+config CMD_MISC
+ bool "sleep"
+ help
+ Delay execution for some time
+
+config CMD_TIMER
+ bool "timer"
+ help
+ Access the system timer.
+
+config CMD_SETGETDCR
+ bool "getdcr, setdcr, getidcr, setidcr"
+ depends on 4xx
+ help
+ getdcr - Get an AMCC PPC 4xx DCR's value
+ setdcr - Set an AMCC PPC 4xx DCR's value
+ getidcr - Get a register value via indirect DCR addressing
+ setidcr - Set a register value via indirect DCR addressing
+
+endmenu
+
endmenu