*/
#include <common.h>
-#include <bootm.h>
#include <charset.h>
#include <command.h>
#include <dm.h>
#include <efi_loader.h>
#include <efi_selftest.h>
+#include <env.h>
#include <errno.h>
#include <linux/libfdt.h>
#include <linux/libfdt_env.h>
#include <mapmem.h>
#include <memalign.h>
-#include <asm/global_data.h>
#include <asm-generic/sections.h>
-#include <asm-generic/unaligned.h>
#include <linux/linkage.h>
DECLARE_GLOBAL_DATA_PTR;
static struct efi_device_path *bootefi_image_path;
static struct efi_device_path *bootefi_device_path;
-/*
- * Allow unaligned memory access.
- *
- * This routine is overridden by architectures providing this feature.
- */
-void __weak allow_unaligned(void)
-{
-}
-
-/*
+/**
* Set the load options of an image from an environment variable.
*
* @handle: the image handle
return ret;
}
-/*
+/**
* efi_carve_out_dt_rsv() - Carve out DT reserved memory ranges
*
* The mem_rsv entries of the FDT are added to the memory map. Any failures are
pages = efi_size_in_pages(size + (addr & EFI_PAGE_MASK));
addr &= ~EFI_PAGE_MASK;
- if (!efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE,
- false))
+ if (efi_add_memory_map(addr, pages, EFI_RESERVED_MEMORY_TYPE,
+ false) != EFI_SUCCESS)
printf("FDT memrsv map %d: Failed to add to map\n", i);
}
}
/**
* efi_install_fdt() - install fdt passed by a command argument
+ *
+ * If fdt_opt is available, the device tree located at that memory address will
+ * will be installed as configuration table, otherwise the device tree located
+ * at the address indicated by environment variable fdtcontroladdr will be used.
+ *
+ * On architectures (x86) using ACPI tables device trees shall not be installed
+ * as configuration table.
+ *
* @fdt_opt: pointer to argument
* Return: status code
- *
- * If specified, fdt will be installed as configuration table,
- * otherwise no fdt will be passed.
*/
static efi_status_t efi_install_fdt(const char *fdt_opt)
{
}
/**
- * do_efibootmgr() - execute EFI Boot Manager
+ * do_efibootmgr() - execute EFI boot manager
*
- * @fdt_opt: string of fdt start address
* Return: status code
- *
- * Execute EFI Boot Manager
*/
-static int do_efibootmgr(const char *fdt_opt)
+static int do_efibootmgr(void)
{
efi_handle_t handle;
efi_status_t ret;
- /* Allow unaligned memory access */
- allow_unaligned();
-
- switch_to_non_secure_mode();
-
- /* Initialize EFI drivers */
- ret = efi_init_obj_list();
- if (ret != EFI_SUCCESS) {
- printf("Error: Cannot initialize UEFI sub-system, r = %lu\n",
- ret & ~EFI_ERROR_MASK);
- return CMD_RET_FAILURE;
- }
-
- ret = efi_install_fdt(fdt_opt);
- if (ret == EFI_INVALID_PARAMETER)
- return CMD_RET_USAGE;
- else if (ret != EFI_SUCCESS)
- return CMD_RET_FAILURE;
-
ret = efi_bootmgr_load(&handle);
if (ret != EFI_SUCCESS) {
printf("EFI boot manager: Cannot load any image\n");
return CMD_RET_SUCCESS;
}
-/*
- * do_bootefi_image() - execute EFI binary from command line
+/**
+ * do_bootefi_image() - execute EFI binary
+ *
+ * Set up memory image for the binary to be loaded, prepare device path, and
+ * then call do_bootefi_exec() to execute it.
*
* @image_opt: string of image start address
- * @fdt_opt: string of fdt start address
* Return: status code
- *
- * Set up memory image for the binary to be loaded, prepare
- * device path and then call do_bootefi_exec() to execute it.
*/
-static int do_bootefi_image(const char *image_opt, const char *fdt_opt)
+static int do_bootefi_image(const char *image_opt)
{
void *image_buf;
struct efi_device_path *device_path, *image_path;
efi_handle_t mem_handle = NULL, handle;
efi_status_t ret;
- /* Allow unaligned memory access */
- allow_unaligned();
-
- switch_to_non_secure_mode();
-
- /* Initialize EFI drivers */
- ret = efi_init_obj_list();
- if (ret != EFI_SUCCESS) {
- printf("Error: Cannot initialize UEFI sub-system, r = %lu\n",
- ret & ~EFI_ERROR_MASK);
- return CMD_RET_FAILURE;
- }
-
- ret = efi_install_fdt(fdt_opt);
- if (ret == EFI_INVALID_PARAMETER)
- return CMD_RET_USAGE;
- else if (ret != EFI_SUCCESS)
- return CMD_RET_FAILURE;
-
#ifdef CONFIG_CMD_BOOTEFI_HELLO
if (!strcmp(image_opt, "hello")) {
char *saddr;
}
/**
- * do_efi_selftest() - execute EFI Selftest
+ * do_efi_selftest() - execute EFI selftest
*
- * @fdt_opt: string of fdt start address
* Return: status code
- *
- * Execute EFI Selftest
*/
-static int do_efi_selftest(const char *fdt_opt)
+static int do_efi_selftest(void)
{
struct efi_loaded_image_obj *image_obj;
struct efi_loaded_image *loaded_image_info;
efi_status_t ret;
- /* Allow unaligned memory access */
- allow_unaligned();
-
- switch_to_non_secure_mode();
-
- /* Initialize EFI drivers */
- ret = efi_init_obj_list();
- if (ret != EFI_SUCCESS) {
- printf("Error: Cannot initialize UEFI sub-system, r = %lu\n",
- ret & ~EFI_ERROR_MASK);
- return CMD_RET_FAILURE;
- }
-
- ret = efi_install_fdt(fdt_opt);
- if (ret == EFI_INVALID_PARAMETER)
- return CMD_RET_USAGE;
- else if (ret != EFI_SUCCESS)
- return CMD_RET_FAILURE;
-
ret = bootefi_test_prepare(&image_obj, &loaded_image_info,
"\\selftest", "efi_selftest");
if (ret != EFI_SUCCESS)
}
#endif /* CONFIG_CMD_BOOTEFI_SELFTEST */
-/* Interpreter command to boot an arbitrary EFI image from memory */
+/**
+ * do_bootefi() - execute `bootefi` command
+ *
+ * @cmdtp: table entry describing command
+ * @flag: bitmap indicating how the command was invoked
+ * @argc: number of arguments
+ * @argv: command line arguments
+ * Return: status code
+ */
static int do_bootefi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
+ efi_status_t ret;
+
if (argc < 2)
return CMD_RET_USAGE;
+ /* Initialize EFI drivers */
+ ret = efi_init_obj_list();
+ if (ret != EFI_SUCCESS) {
+ printf("Error: Cannot initialize UEFI sub-system, r = %lu\n",
+ ret & ~EFI_ERROR_MASK);
+ return CMD_RET_FAILURE;
+ }
+
+ ret = efi_install_fdt(argc > 2 ? argv[2] : NULL);
+ if (ret == EFI_INVALID_PARAMETER)
+ return CMD_RET_USAGE;
+ else if (ret != EFI_SUCCESS)
+ return CMD_RET_FAILURE;
+
if (!strcmp(argv[1], "bootmgr"))
- return do_efibootmgr(argc > 2 ? argv[2] : NULL);
+ return do_efibootmgr();
#ifdef CONFIG_CMD_BOOTEFI_SELFTEST
else if (!strcmp(argv[1], "selftest"))
- return do_efi_selftest(argc > 2 ? argv[2] : NULL);
+ return do_efi_selftest();
#endif
- return do_bootefi_image(argv[1], argc > 2 ? argv[2] : NULL);
+ return do_bootefi_image(argv[1]);
}
#ifdef CONFIG_SYS_LONGHELP
bootefi_help_text
);
+/**
+ * efi_set_bootdev() - set boot device
+ *
+ * This function is called when a file is loaded, e.g. via the 'load' command.
+ * We use the path to this file to inform the UEFI binary about the boot device.
+ *
+ * @dev: device, e.g. "MMC"
+ * @devnr: number of the device, e.g. "1:2"
+ * @path: path to file loaded
+ */
void efi_set_bootdev(const char *dev, const char *devnr, const char *path)
{
struct efi_device_path *device, *image;