config SYS_PROMPT
string "Shell prompt"
+ default "Zynq> " if ARCH_ZYNQ
+ default "ZynqMP> " if ARCH_ZYNQMP
default "=> "
help
This string is displayed in the command line to the left of the
config AUTOBOOT_MENU_SHOW
bool "Show a menu on boot"
+ depends on CMD_BOOTMENU
help
This enables the boot menu, controlled by environment variables
defined by the board. The menu starts after running the 'preboot'
help
Boot an EFI image from memory.
+config BOOTM_LINUX
+ bool "Support booting Linux OS images"
+ depends on CMD_BOOTM || CMD_BOOTZ || CMD_BOOTI
+ default y
+ help
+ Support booting the Linux kernel directly via a command such as bootm
+ or booti or bootz.
+
+config BOOTM_NETBSD
+ bool "Support booting NetBSD (non-EFI) loader images"
+ depends on CMD_BOOTM
+ default y
+ help
+ Support booting NetBSD via the bootm command.
+
+config BOOTM_OPENRTOS
+ bool "Support booting OPENRTOS / FreeRTOS images"
+ depends on CMD_BOOTM
+ help
+ Support booting OPENRTOS / FreeRTOS via the bootm command.
+
+config BOOTM_OSE
+ bool "Support booting Enea OSE images"
+ depends on CMD_BOOTM
+ help
+ Support booting Enea OSE images via the bootm command.
+
+config BOOTM_PLAN9
+ bool "Support booting Plan9 OS images"
+ depends on CMD_BOOTM
+ default y
+ help
+ Support booting Plan9 images via the bootm command.
+
+config BOOTM_RTEMS
+ bool "Support booting RTEMS OS images"
+ depends on CMD_BOOTM
+ default y
+ help
+ Support booting RTEMS images via the bootm command.
+
+config BOOTM_VXWORKS
+ bool "Support booting VxWorks OS images"
+ depends on CMD_BOOTM
+ default y
+ help
+ Support booting VxWorks images via the bootm command.
+
config CMD_BOOTEFI_HELLO_COMPILE
bool "Compile a standard EFI hello world binary for testing"
depends on CMD_BOOTEFI && !CPU_V7M && !SANDBOX
config CMD_NVEDIT_EFI
bool "env [set|print] -e - set/print UEFI variables"
depends on EFI_LOADER
- default y
imply HEXDUMP
help
UEFI variables are encoded as some form of U-Boot variables.
base - print or set address offset
loop - initialize loop on address range
+config MX_CYCLIC
+ bool "Enable cyclic md/mw commands"
+ depends on CMD_MEMORY
+ help
+ Add the "mdc" and "mwc" memory commands. These are cyclic
+ "md/mw" commands.
+ Examples:
+
+ => mdc.b 10 4 500
+ This command will print 4 bytes (10,11,12,13) each 500 ms.
+
+ => mwc.l 100 12345678 10
+ This command will write 12345678 to address 100 all 10 ms.
+
config CMD_RANDOM
bool "random"
default y
peripherals. Sub-commands allow bus enumeration, displaying and
changing configuration space and a few other features.
-config CMD_PCMCIA
- bool "pinit - Set up PCMCIA device"
- help
- Provides a means to initialise a PCMCIA (Personal Computer Memory
- Card International Association) device. This is an old standard from
- about 1990. These devices are typically removable memory or network
- cards using a standard 68-pin connector.
-
config CMD_PINMUX
bool "pinmux - show pins muxing"
default y if PINCTRL
This provides various sub-commands to initialise and configure the
Turndra tsi148 device. See the command help for full details.
+config CMD_UFS
+ bool "Enable UFS - Universal Flash Subsystem commands"
+ depends on UFS
+ help
+ "This provides commands to initialise and configure universal flash
+ subsystem devices"
+
config CMD_UNIVERSE
bool "universe - Command to set up the Turndra Universe controller"
help
bool "Request & store 'ntpserverip' from BOOTP/DHCP server"
depends on CMD_BOOTP
+config CMD_PCAP
+ bool "pcap capture"
+ help
+ Selecting this will allow capturing all Ethernet packets and store
+ them in physical memory in a PCAP formated file,
+ later to be analyzed by PCAP reader application (IE. WireShark).
+
config BOOTP_PXE
bool "Send PXE client arch to BOOTP/DHCP server"
default y
bool "Enable 'bmp' command"
depends on LCD || DM_VIDEO || VIDEO
help
- This provides a way to obtain information about a BMP-format iamge
+ This provides a way to obtain information about a BMP-format image
and to display it. BMP (which presumably stands for BitMaP) is a
file format defined by Microsoft which supports images of various
depths, formats and compression methods. Headers on the file