# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_camera_mode (Toggle camera mode key) key KEY_F7
-# Key for increasing the viewing range. Modifies the minimum viewing range.
+# Key for increasing the viewing range.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_increase_viewing_range_min (View range increase key) key +
-# Key for decreasing the viewing range. Modifies the minimum viewing range.
+# Key for decreasing the viewing range.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_decrease_viewing_range_min (View range decrease key) key -
# Use 3D cloud look instead of flat.
enable_3d_clouds (3D clouds) bool true
+# Method used to highlight selected object.
+node_highlighting (Node highlighting) enum box box,halo
+
[***Filtering]
# Use mip mapping to scale textures. May slightly increase performance.
# enabled.
texture_min_size (Minimum texture size for filters) int 64
-# Pre-generate all item visuals used in the inventory.
-# This increases startup time, but runs smoother in-game.
-# The generated textures can easily exceed your VRAM, causing artifacts in the inventory.
-preload_item_visuals (Preload inventory textures) bool false
-
# Experimental option, might cause visible spaces between blocks
# when set to higher number than 0.
fsaa (FSAA) enum 0 0,1,2,4,8,16
# Thy only work with the OpenGL video backend.
enable_shaders (Shaders) bool true
+[****Tone Mapping]
+
+# Enables filmic tone mapping
+tone_mapping (Filmic tone mapping) bool false
+
[****Bumpmapping]
# Enables bumpmapping for textures. Normalmaps need to be supplied by the texture pack
[***Advanced]
-# Minimum wanted FPS.
-# The amount of rendered stuff is dynamically set according to this. and viewing range min and max.
-wanted_fps (Wanted FPS) int 30
-
# If FPS would go higher than this, limit it by sleeping
# to not waste CPU power for no benefit.
fps_max (Maximum FPS) int 60
# Maximum FPS when game is paused.
pause_fps_max (FPS in pause menu) int 20
-# The allowed adjustment range for the automatic rendering range adjustment.
-# Set this to be equal to viewing range minimum to disable the auto-adjustment algorithm.
-viewing_range_nodes_max (Viewing range maximum) int 160
-
-# The allowed adjustment range for the automatic rendering range adjustment.
-# Set this to be equal to viewing range maximum to disable the auto-adjustment algorithm.
-viewing_range_nodes_min (Viewing range minimum) int 35
+# View distance in nodes.
+# Min = 20
+viewing_range (Viewing range) int 100
# Width component of the initial window size.
screenW (Screen width) int 800
# Useful if there's something to be displayed right or left of hotbar.
hud_hotbar_max_width (Maximum hotbar width) float 1.0
-# Enable selection highlighting for nodes (disables selectionbox).
-enable_node_highlighting (Node highlighting) bool false
-
# Enables caching of facedir rotated meshes.
enable_mesh_cache (Mesh cache) bool false
# set to the nearest valid value.
ambient_occlusion_gamma (Ambient occlusion gamma) float 2.2 0.25 4.0
+# Enables animation of inventory items.
+inventory_items_animations (Inventory items animations) bool false
+
[**Menus]
# Use a cloud animation for the main menu background.
# If this is set, players will always (re)spawn at the given position.
static_spawnpoint (Static spawnpoint) string
-# Maximum distance above water level for player spawn.
-# Larger values result in spawn points closer to (x = 0, z = 0).
-# Smaller values may result in a suitable spawn point not being found,
-# resulting in a spawn at (0, 0, 0) possibly buried underground.
-vertical_spawn_range (Vertical spawn range) int 16
-
# If enabled, new players cannot join with an empty password.
disallow_empty_password (Disallow empty passwords) bool false
# Occasional lakes and hills added to the flat world.
# Flags that are not specified in the flag string are not modified from the default.
# Flags starting with "no" are used to explicitly disable them.
-mgflat_spflags (Mapgen flat flags) flags nolakes,nohills lakes,hills,nolakes,nohills
+mgflat_spflags (Mapgen flat flags) flags lakes,hills,,nolakes,nohills
# Y of flat ground.
mgflat_ground_level (Mapgen flat ground level) int 8
mgfractal_np_cave1 (Mapgen fractal cave1 noise parameters) noise_params 0, 12, (128, 128, 128), 52534, 4, 0.5, 2.0
mgfractal_np_cave2 (Mapgen fractal cave2 noise parameters) noise_params 0, 12, (128, 128, 128), 10325, 4, 0.5, 2.0
+# Mapgen Valleys parameters
+[***Mapgen Valleys]
+
+# General parameters
+[****General]
+
+# Map generation attributes specific to Mapgen Valleys.
+# Flags that are not specified in the flag string are not modified from the default.
+# Flags starting with "no" are used to explicitly disable them.
+# "altitude_chill" makes higher elevations colder, which may cause biome issues.
+# "humid_rivers" modifies the humidity around rivers and in areas where water would tend to pool. It may interfere with delicately adjusted biomes.
+mg_valleys_spflags (Valleys C Flags) flags altitude_chill,humid_rivers altitude_chill,noaltitude_chill,humid_rivers,nohumid_rivers
+
+# The altitude at which temperature drops by 20C
+mg_valleys_altitude_chill (Altitude Chill) int 90
+
+# Depth below which you'll find large caves.
+mg_valleys_large_cave_depth (Large cave depth) int -33
+
+# Creates unpredictable lava features in caves.
+# These can make mining difficult. Zero disables them. (0-10)
+mg_valleys_lava_features (Lava Features) int 0
+
+# Depth below which you'll find massive caves.
+mg_valleys_massive_cave_depth (Massive cave depth) int -256
+
+# How deep to make rivers
+mg_valleys_river_depth (River Depth) int 4
+
+# How wide to make rivers
+mg_valleys_river_size (River Size) int 5
+
+# Creates unpredictable water features in caves.
+# These can make mining difficult. Zero disables them. (0-10)
+mg_valleys_water_features (Water Features) int 0
+
+# Noise parameters
+[****Noises]
+
+# Caves and tunnels form at the intersection of the two noises
+mg_valleys_np_cave1 (Cave noise #1) noise_params 0, 12, (100, 100, 100), 52534, 4, 0.5, 2.0
+
+# Caves and tunnels form at the intersection of the two noises
+mg_valleys_np_cave2 (Cave noise #2) noise_params 0, 12, (100, 100, 100), 10325, 4, 0.5, 2.0
+
+# The depth of dirt or other filler
+mg_valleys_np_filler_depth (Filler Depth) noise_params 0, 1.2, (256, 256, 256), 1605, 3, 0.5, 2.0
+
+# Massive caves form here.
+mg_valleys_np_massive_caves (Massive cave noise) noise_params 0, 1, (768, 256, 768), 59033, 6, 0.63, 2.0
+
+# River noise -- rivers occur close to zero
+mg_valleys_np_rivers (River Noise) noise_params 0, 1, (256, 256, 256), -6050, 5, 0.6, 2.0
+
+# Base terrain height
+mg_valleys_np_terrain_height (Terrain Height) noise_params -10, 50, (1024, 1024, 1024), 5202, 6, 0.4, 2.0
+
+# Raises terrain to make valleys around the rivers
+mg_valleys_np_valley_depth (Valley Depth) noise_params 5, 4, (512, 512, 512), -1914, 1, 1.0, 2.0
+
+# Slope and fill work together to modify the heights
+mg_valleys_np_inter_valley_fill (Valley Fill) noise_params 0, 1, (256, 512, 256), 1993, 6, 0.8, 2.0
+
+# Amplifies the valleys
+mg_valleys_np_valley_profile (Valley Profile) noise_params 0.6, 0.5, (512, 512, 512), 777, 1, 1.0, 2.0
+
+# Slope and fill work together to modify the heights
+mg_valleys_np_inter_valley_slope (Valley Slope) noise_params 0.5, 0.5, (128, 128, 128), 746, 1, 1.0, 2.0
+
[*Security]
# Prevent mods from doing insecure things like running shell commands.
# functions even when mod security is on (via request_insecure_environment()).
secure.trusted_mods (Trusted mods) string
+# Comma-seperated list of mods that are allowed to access HTTP APIs, which
+# allow them to upload and download data to/from the internet.
+secure.http_mods (HTTP Mods) string
+
[Client and Server]
# Name of the player.
projects / oweals / minetest.git / blobdiff