nand_spl: nand_boot.c: Remove CONFIG_SYS_NAND_READ_DELAY

[oweals/u-boot.git] / board / trab / tsc2000.c

diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index f13a5a9dc0251d4173472381a1315e5fd448a9fd..426ed9c520bd60462898c8f2e74c85d782a58b71 100644 (file)
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -26,7 +26,8 @@
  */
 
 #include <common.h>
-#include <s3c2400.h>
+#include <asm/arch/s3c24x0_cpu.h>
+#include <asm/io.h>
 #include <div64.h>
 #include "tsc2000.h"
 
@@ -42,28 +43,28 @@
  */
 #define MAX_DEVIATION  18      /* unit: DIGITs of adc; 18 DIGIT = 0.5 °C */
 
-void spi_init(void)
+void tsc2000_spi_init(void)
 {
-       S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-       S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+       struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+       struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
        int i;
 
        /* Configure I/O ports. */
-       gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000;
-       gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000;
-       gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000;
-       gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000;
+       gpio->pdcon = (gpio->pdcon & 0xF3FFFF) | 0x040000;
+       gpio->pgcon = (gpio->pgcon & 0x0F3FFF) | 0x008000;
+       gpio->pgcon = (gpio->pgcon & 0x0CFFFF) | 0x020000;
+       gpio->pgcon = (gpio->pgcon & 0x03FFFF) | 0x080000;
 
        CLR_CS_TOUCH();
 
-       spi->ch[0].SPPRE = 0x1F; /* Baud-rate ca. 514kHz */
-       spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */
-       spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0,
+       spi->ch[0].sppre = 0x1F; /* Baud-rate ca. 514kHz */
+       spi->ch[0].sppin = 0x01; /* SPI-MOSI holds Level after last bit */
+       spi->ch[0].spcon = 0x1A; /* Polling, Prescaler, Master, CPOL=0,
                                    CPHA=1 */
 
        /* Dummy byte ensures clock to be low. */
        for (i = 0; i < 10; i++) {
-               spi->ch[0].SPTDAT = 0xFF;
+               spi->ch[0].sptdat = 0xFF;
        }
        spi_wait_transmit_done();
 }
@@ -71,26 +72,27 @@ void spi_init(void)
 
 void spi_wait_transmit_done(void)
 {
-       S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+       struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 
-       while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
+       while (!(spi->ch[0].spsta & 0x01)) /* wait until transfer is done */
+               ;
 }
 
 
 void tsc2000_write(unsigned short reg, unsigned short data)
 {
-       S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+       struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
        unsigned int command;
 
        SET_CS_TOUCH();
        command = reg;
-       spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
+       spi->ch[0].sptdat = (command & 0xFF00) >> 8;
        spi_wait_transmit_done();
-       spi->ch[0].SPTDAT = (command & 0x00FF);
+       spi->ch[0].sptdat = (command & 0x00FF);
        spi_wait_transmit_done();
-       spi->ch[0].SPTDAT = (data & 0xFF00) >> 8;
+       spi->ch[0].sptdat = (data & 0xFF00) >> 8;
        spi_wait_transmit_done();
-       spi->ch[0].SPTDAT = (data & 0x00FF);
+       spi->ch[0].sptdat = (data & 0x00FF);
        spi_wait_transmit_done();
 
        CLR_CS_TOUCH();
@@ -100,30 +102,30 @@ void tsc2000_write(unsigned short reg, unsigned short data)
 unsigned short tsc2000_read (unsigned short reg)
 {
        unsigned short command, data;
-       S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+       struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 
        SET_CS_TOUCH();
        command = 0x8000 | reg;
 
-       spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
+       spi->ch[0].sptdat = (command & 0xFF00) >> 8;
        spi_wait_transmit_done();
-       spi->ch[0].SPTDAT = (command & 0x00FF);
+       spi->ch[0].sptdat = (command & 0x00FF);
        spi_wait_transmit_done();
 
-       spi->ch[0].SPTDAT = 0xFF;
+       spi->ch[0].sptdat = 0xFF;
        spi_wait_transmit_done();
-       data = spi->ch[0].SPRDAT;
-       spi->ch[0].SPTDAT = 0xFF;
+       data = spi->ch[0].sprdat;
+       spi->ch[0].sptdat = 0xFF;
        spi_wait_transmit_done();
 
        CLR_CS_TOUCH();
-       return (spi->ch[0].SPRDAT & 0x0FF) | (data << 8);
+       return (spi->ch[0].sprdat & 0x0FF) | (data << 8);
 }
 
 
 void tsc2000_set_mux (unsigned int channel)
 {
-       S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+       struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
        CLR_MUX1_ENABLE; CLR_MUX2_ENABLE;
        CLR_MUX3_ENABLE; CLR_MUX4_ENABLE;
@@ -200,7 +202,7 @@ void tsc2000_set_mux (unsigned int channel)
 
 void tsc2000_set_range (unsigned int range)
 {
-       S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+       struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
        switch (range) {
        case 1:
@@ -306,7 +308,7 @@ s32 tsc2000_contact_temp (void)
 
 void tsc2000_reg_init (void)
 {
-       S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+       struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
        tsc2000_write(TSC2000_REG_ADC, 0x2036);
        tsc2000_write(TSC2000_REG_REF, 0x0011);