83xx/85xx/86xx: add more MxMR local bus definitions

[oweals/u-boot.git] / board / tqm5200 / cmd_stk52xx.c

diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
old mode 100755 (executable)
new mode 100644 (file)
index 2326a28..7472ca9
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -22,16 +22,16 @@
  */
 
 /*
- * SKT52XX specific functions
+ * STK52XX specific functions
  */
 /*#define DEBUG*/
 
 #include <common.h>
 #include <command.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
-#if defined (CONFIG_STK52XX)
+#if defined(CONFIG_CMD_BSP)
 
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define DEFAULT_VOL    45
 #define DEFAULT_FREQ   500
 #define DEFAULT_DURATION       200
@@ -46,7 +46,7 @@
 #define SM501_POWER_MODE0_GATE         0x00000040UL
 #define SM501_POWER_MODE1_GATE         0x00000048UL
 #define POWER_MODE_GATE_GPIO_PWM_I2C   0x00000040UL
-#define SM501_GPIO_DATA_LOW            0x00010000UL
+#define SM501_GPIO_DATA_LOW            0x00010000UL
 #define SM501_GPIO_DATA_HIGH           0x00010004UL
 #define SM501_GPIO_DATA_DIR_LOW                0x00010008UL
 #define SM501_GPIO_DATA_DIR_HIGH       0x0001000CUL
@@ -537,7 +537,9 @@ static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
        return rcode;
 }
+#endif
 
+#if defined(CONFIG_STK52XX)
 void led_init(void)
 {
        struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
@@ -559,7 +561,7 @@ void led_init(void)
        gpt->gpt6.emsr |=  0x00000024;
        gpt->gpt7.emsr |=  0x00000024;
 
-
+#ifndef CONFIG_TQM5200S
        /* enable SM501 GPIO control (in both power modes) */
        *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |=
                POWER_MODE_GATE_GPIO_PWM_I2C;
@@ -572,6 +574,7 @@ void led_init(void)
 
        /* configure SM501 gpio pins 48-51 as output */
        *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16);
+#endif /* !CONFIG_TQM5200S */
 }
 
 /*
@@ -583,7 +586,7 @@ int do_led(char *argv[])
        struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
        struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
 
-       switch  (simple_strtoul(argv[2], NULL, 10)) {
+       switch  (simple_strtoul(argv[2], NULL, 10)) {
 
        case 0:
                if (strcmp (argv[3], "on") == 0) {
@@ -648,7 +651,7 @@ int do_led(char *argv[])
                        gpt->gpt7.emsr &=  ~(1 << 4);
                }
                break;
-
+#ifndef CONFIG_TQM5200S
        case 24:
                if (strcmp (argv[3], "on") == 0) {
                        *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |=
@@ -728,7 +731,7 @@ int do_led(char *argv[])
                                ~(0x1 << 19);
                }
                break;
-
+#endif /* !CONFIG_TQM5200S */
        default:
                printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]);
                return 1;
@@ -736,7 +739,9 @@ int do_led(char *argv[])
 
        return 0;
 }
+#endif
 
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 /*
  * return 1 on CAN initialization failure
  * return 0 if no failure
@@ -995,7 +1000,7 @@ int do_rs232(char *argv[])
        struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
        struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1;
 
-       switch  (simple_strtoul(argv[2], NULL, 10)) {
+       switch  (simple_strtoul(argv[2], NULL, 10)) {
 
        case 1:
                /* check RTS <-> CTS loop */
@@ -1106,6 +1111,7 @@ int do_rs232(char *argv[])
        return error_status;
 }
 
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
 static void sm501_backlight (unsigned int state)
 {
        if (state == BL_ON) {
@@ -1115,6 +1121,7 @@ static void sm501_backlight (unsigned int state)
                *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
                        ~((1 << 26) | (1 << 27));
 }
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
 
 int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -1124,7 +1131,9 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
        printf ("Revision 100 of STK52XX not supported!\n");
        return 1;
 #endif
+#if defined(CONFIG_STK52XX)
        led_init();
+#endif
        can_init();
 
        switch (argc) {
@@ -1152,6 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                        else
                                printf ("Error\n");
                        return rcode;
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
                } else if (strncmp (argv[1], "backlight", 4) == 0) {
                        if (strncmp (argv[2], "on", 2) == 0) {
                                sm501_backlight (BL_ON);
@@ -1161,14 +1171,17 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                                sm501_backlight (BL_OFF);
                                return 0;
                        }
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
                }
                break;
 
+#if defined(CONFIG_STK52XX)
        case 4:
                if (strcmp (argv[1], "led") == 0) {
                        return (do_led (argv));
                }
                break;
+#endif
 
        default:
                break;
@@ -1204,18 +1217,31 @@ U_BOOT_CMD(
        "[channel]\n"
        "    - play short beep on \"l\"eft or \"r\"ight channel\n"
 );
+#endif /* CONFIG_STK52XX  || CONFIG_FO300 */
 
+#if defined(CONFIG_STK52XX)
 U_BOOT_CMD(
        fkt ,   4,      1,      cmd_fkt,
        "fkt     - Function test routines\n",
        "led number on/off\n"
-       "     - 'number's like printed on SKT52XX board\n"
+       "     - 'number's like printed on STK52XX board\n"
        "fkt can\n"
        "     - loopback plug for X83 required\n"
        "fkt rs232 number\n"
        "     - loopback plug(s) for X2 required\n"
+#ifndef CONFIG_TQM5200S
        "fkt backlight on/off\n"
        "     - switch backlight on or off\n"
+#endif /* !CONFIG_TQM5200S */
 );
-#endif /* CONFIG_STK52XX */
-#endif /* CFG_CMD_BSP */
+#elif defined(CONFIG_FO300)
+U_BOOT_CMD(
+       fkt ,   3,      1,      cmd_fkt,
+       "fkt     - Function test routines\n",
+       "fkt can\n"
+       "     - loopback plug for X16/X29 required\n"
+       "fkt rs232 number\n"
+       "     - loopback plug(s) for X21/X22 required\n"
+);
+#endif
+#endif