Fix incorrect use of getenv() before relocation

[oweals/u-boot.git] / board / tqc / tqm85xx / tlb.c

diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c
index 75dd348aa529c7405580d6b288857b71438bd6a9..f9f8cc9a01e828de413ee66d4d6aa9ae1b7dd54d 100644 (file)
--- a/board/tqc/tqm85xx/tlb.c
+++ b/board/tqc/tqm85xx/tlb.c
@@ -120,36 +120,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
        SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
                       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
                       0, 6, BOOKE_PAGESZ_64M, 1),
-
-#if defined(CONFIG_TQM8548_AG) || defined (CONFIG_TQM8548_BE)
-       /*
-        * TLB 7+8:       2G     DDR, cache enabled
-        * 0x00000000     2G     DDR System memory
-        * Without SPD EEPROM configured DDR, this must be setup manually.
-        */
-       SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-                      MAS3_SX | MAS3_SW | MAS3_SR, 0,
-                      0, 7, BOOKE_PAGESZ_1G, 1),
-
-       SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-                      CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-                      MAS3_SX | MAS3_SW | MAS3_SR, 0,
-                      0, 8, BOOKE_PAGESZ_1G, 1),
-#else
-       /*
-        * TLB 7+8:     512M     DDR, cache disabled (needed for memory test)
-        * 0x00000000   512M     DDR System memory
-        * Without SPD EEPROM configured DDR, this must be setup manually.
-        */
-       SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-                      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-                      0, 7, BOOKE_PAGESZ_256M, 1),
-
-       SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-                      CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-                      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-                      0, 8, BOOKE_PAGESZ_256M, 1),
-#endif
 #ifdef CONFIG_PCIE1
        /*
         * TLB 9:        16M    Non-cacheable, guarded
@@ -228,23 +198,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
        SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
                       MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
                       0, 7, BOOKE_PAGESZ_64M, 1),
-
-       /*
-        * TLB 8+9:     512M     DDR, cache disabled (needed for memory test)
-        * 0x00000000   512M     DDR System memory
-        * Without SPD EEPROM configured DDR, this must be setup manually.
-        * Make sure the TLB count at the top of this table is correct.
-        * Likely it needs to be increased by two for these entries.
-        */
-       SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-                      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-                      0, 8, BOOKE_PAGESZ_256M, 1),
-
-       SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-                      CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-                      MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
-                      0, 9, BOOKE_PAGESZ_256M, 1),
-
 #ifdef CONFIG_PCIE1
        /*
         * TLB 10:       16M    Non-cacheable, guarded