Merge tag 'efi-2020-07-rc6' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
[oweals/u-boot.git] / board / ti / am57xx / board.c
index c57473c80245c69daf8dcd2da86fb7d8f89150d4..8720eb87a55d5e5a4f71287560922ff23cee7b73 100644 (file)
 #include <common.h>
 #include <env.h>
 #include <fdt_support.h>
+#include <image.h>
 #include <init.h>
+#include <malloc.h>
+#include <net.h>
 #include <palmas.h>
 #include <sata.h>
 #include <serial.h>
 #include <usb.h>
+#include <errno.h>
 #include <asm/omap_common.h>
 #include <asm/omap_sec_common.h>
 #include <asm/emif.h>
 #include <ti-usb-phy-uboot.h>
 #include <mmc.h>
 #include <dm/uclass.h>
+#include <hang.h>
 
 #include "../common/board_detect.h"
 #include "mux_data.h"
 
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+static int board_bootmode_has_emmc(void);
+#endif
+
 #define board_is_x15()         board_ti_is("BBRDX15_")
 #define board_is_x15_revb1()   (board_ti_is("BBRDX15_") && \
                                 !strncmp("B.10", board_ti_get_rev(), 3))
@@ -50,6 +59,7 @@
 #define board_is_am574x_idk()  board_ti_is("AM574IDK")
 #define board_is_am572x_idk()  board_ti_is("AM572IDK")
 #define board_is_am571x_idk()  board_ti_is("AM571IDK")
+#define board_is_bbai()                board_ti_is("BBONE-AI")
 
 #ifdef CONFIG_DRIVER_TI_CPSW
 #include <cpsw.h>
@@ -99,12 +109,19 @@ static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
        .is_ma_present  = 0x1
 };
 
+static const struct dmm_lisa_map_regs bbai_lisa_regs = {
+       .dmm_lisa_map_3 = 0x80640100,
+       .is_ma_present  = 0x1
+};
+
 void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
 {
        if (board_is_am571x_idk())
                *dmm_lisa_regs = &am571x_idk_lisa_regs;
        else if (board_is_am574x_idk())
                *dmm_lisa_regs = &am574x_idk_lisa_regs;
+       else if (board_is_bbai())
+               *dmm_lisa_regs = &bbai_lisa_regs;
        else
                *dmm_lisa_regs = &beagle_x15_lisa_regs;
 }
@@ -508,6 +525,14 @@ void do_board_detect(void)
                                  CONFIG_EEPROM_CHIP_ADDRESS);
        if (rc)
                printf("ti_i2c_eeprom_init failed %d\n", rc);
+
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+       rc = board_bootmode_has_emmc();
+       if (!rc)
+               rc = ti_emmc_boardid_get();
+       if (rc)
+               printf("ti_emmc_boardid_get failed %d\n", rc);
+#endif
 }
 
 #else  /* CONFIG_SPL_BUILD */
@@ -523,6 +548,14 @@ void do_board_detect(void)
        if (rc)
                printf("ti_i2c_eeprom_init failed %d\n", rc);
 
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+       rc = board_bootmode_has_emmc();
+       if (!rc)
+               rc = ti_emmc_boardid_get();
+       if (rc)
+               printf("ti_emmc_boardid_get failed %d\n", rc);
+#endif
+
        if (board_is_x15())
                bname = "BeagleBoard X15";
        else if (board_is_am572x_evm())
@@ -533,6 +566,8 @@ void do_board_detect(void)
                bname = "AM572x IDK";
        else if (board_is_am571x_idk())
                bname = "AM571x IDK";
+       else if (board_is_bbai())
+               bname = "BeagleBone AI";
 
        if (bname)
                snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
@@ -567,6 +602,8 @@ static void setup_board_eeprom_env(void)
                name = "am572x_idk";
        } else if (board_is_am571x_idk()) {
                name = "am571x_idk";
+       } else if (board_is_bbai()) {
+               name = "am5729_beagleboneai";
        } else {
                printf("Unidentified board claims %s in eeprom header\n",
                       board_ti_get_name());
@@ -630,7 +667,7 @@ void am57x_idk_lcd_detect(void)
        struct udevice *dev;
 
        /* Only valid for IDKs */
-       if (board_is_x15() || board_is_am572x_evm())
+       if (board_is_x15() || board_is_am572x_evm() ||  board_is_bbai())
                return;
 
        /* Only AM571x IDK has gpio control detect.. so check that */
@@ -673,6 +710,18 @@ void am57x_idk_lcd_detect(void)
        }
 out:
        env_set("idk_lcd", idk_lcd);
+
+       /*
+        * On AM571x_IDK, no Display with J51 set to LCD is considered as an
+        * invalid configuration and we prevent boot to get user attention.
+        */
+       if (board_is_am571x_idk() && am571x_idk_needs_lcd() &&
+           !strncmp(idk_lcd, "no", 2)) {
+               printf("%s: Invalid HW configuration: display not detected/supported but J51 is set. Remove J51 to boot without display.\n",
+                      __func__);
+               hang();
+       }
+
        return;
 }
 
@@ -728,6 +777,9 @@ int board_late_init(void)
        /* Just probe the potentially supported cdce913 device */
        uclass_get_device(UCLASS_CLK, 0, &dev);
 
+       if (board_is_bbai())
+               env_set("console", "ttyS0,115200n8");
+
 #if !defined(CONFIG_SPL_BUILD)
        board_ti_set_ethaddr(2);
 #endif
@@ -745,6 +797,11 @@ void set_muxconf_regs(void)
 {
        do_set_mux32((*ctrl)->control_padconf_core_base,
                     early_padconf, ARRAY_SIZE(early_padconf));
+
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+       do_set_mux32((*ctrl)->control_padconf_core_base,
+                    emmc_padconf, ARRAY_SIZE(emmc_padconf));
+#endif
 }
 
 #ifdef CONFIG_IODELAY_RECALIBRATION
@@ -770,6 +827,11 @@ void recalibrate_iodelay(void)
                pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am571x_idk);
                iod = iodelay_cfg_array_am571x_idk;
                iod_sz = ARRAY_SIZE(iodelay_cfg_array_am571x_idk);
+       } else if (board_is_bbai()) {
+               pconf = core_padconf_array_essential_bbai;
+               pconf_sz = ARRAY_SIZE(core_padconf_array_essential_bbai);
+               iod = iodelay_cfg_array_bbai;
+               iod_sz = ARRAY_SIZE(iodelay_cfg_array_bbai);
        } else {
                /* Common for X15/GPEVM */
                pconf = core_padconf_array_essential_x15;
@@ -1098,6 +1160,8 @@ int board_fit_config_name_match(const char *name)
                return 0;
        } else if (board_is_am571x_idk() && !strcmp(name, "am571x-idk")) {
                return 0;
+       } else if (board_is_bbai() && !strcmp(name, "am5729-beagleboneai")) {
+               return 0;
        }
 
        return -1;
@@ -1114,6 +1178,17 @@ int fastboot_set_reboot_flag(void)
 }
 #endif
 
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+static int board_bootmode_has_emmc(void)
+{
+       /* Check that boot mode is same as BBAI */
+       if (gd->arch.omap_boot_mode != 2)
+               return -EIO;
+
+       return 0;
+}
+#endif
+
 #ifdef CONFIG_TI_SECURE_DEVICE
 void board_fit_image_post_process(void **p_image, size_t *p_size)
 {