rockchip: puma: remove separate fit generator

[oweals/u-boot.git] / board / theobroma-systems / puma_rk3399 / fit_spl_atf.sh

diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
deleted file mode 100755 (executable)
index c939657..0000000
--- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
+++ /dev/null
@@ -1,94 +0,0 @@
-#!/bin/sh
-#
-# SPDX-License-Identifier:      GPL-2.0+
-#
-# Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
-#
-# Based on the board/sunxi/mksunxi_fit_atf.sh
-#
-# Script to generate FIT image source for 64-bit puma boards with
-# U-Boot proper, ATF, PMU firmware and devicetree.
-#
-# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
-
-[ -z "$BL31" ] && BL31="bl31.bin"
-
-if [ ! -f $BL31 ]; then
-       echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
-       echo "Please read Building section in doc/README.rockchip" >&2
-       BL31=/dev/null
-fi
-
-[ -z "$PMUM0" ] && PMUM0="rk3399m0.bin"
-
-if [ ! -f $PMUM0 ]; then
-       echo "WARNING: PMUM0 file $PMUM0 NOT found, resulting binary is non-functional" >&2
-       echo "Please read Building section in doc/README.rockchip" >&2
-       PMUM0=/dev/null
-fi
-
-cat << __HEADER_EOF
-/* SPDX-License-Identifier: GPL-2.0+ OR X11 */
-/*
- * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
- *
- * Minimal dts for a SPL FIT image payload.
- */
-
-/dts-v1/;
-
-/ {
-       description = "FIT image with U-Boot proper, ATF bl31, M0 Firmware, DTB";
-       #address-cells = <1>;
-
-       images {
-               uboot {
-                       description = "U-Boot (64-bit)";
-                       data = /incbin/("u-boot-nodtb.bin");
-                       type = "standalone";
-                       arch = "arm64";
-                       compression = "none";
-                       load = <0x4a000000>;
-               };
-               atf {
-                       description = "ARM Trusted Firmware";
-                       data = /incbin/("$BL31");
-                       type = "firmware";
-                       arch = "arm64";
-                       os = "arm-trusted-firmware";
-                       compression = "none";
-                       load = <0x1000>;
-                       entry = <0x1000>;
-               };
-               pmu {
-                       description = "Cortex-M0 firmware";
-                       data = /incbin/("$PMUM0");
-                       type = "pmu-firmware";
-                       compression = "none";
-                       load = <0x180000>;
-                };
-               fdt {
-                       description = "RK3399-Q7 (Puma) flat device-tree";
-                       data = /incbin/("$1");
-                       type = "flat_dt";
-                       compression = "none";
-               };
-__HEADER_EOF
-
-cat << __CONF_HEADER_EOF
-       };
-
-       configurations {
-               default = "conf";
-               conf {
-                       description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
-                       firmware = "atf";
-                       loadables = "uboot", "pmu";
-                       fdt = "fdt";
-               };
-__CONF_HEADER_EOF
-
-cat << __ITS_EOF
-       };
-};
-__ITS_EOF