select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+config MACH_SUN8I_A83T
+ bool "sun8i (Allwinner A83T)"
+ select CPU_V7
+ select SUNXI_GEN_SUN6I
+ select SUPPORT_SPL
+
config MACH_SUN8I_H3
bool "sun8i (Allwinner H3)"
select CPU_V7
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
-config MACH_SUN50I
- bool "sun50i (Allwinner A64)"
- select ARM64
- select SUNXI_GEN_SUN6I
-
-config MACH_SUN8I_A83T
- bool "sun8i (Allwinner A83T)"
- select CPU_V7
- select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
-
config MACH_SUN9I
bool "sun9i (Allwinner A80)"
select CPU_V7
select SUNXI_GEN_SUN6I
+config MACH_SUN50I
+ bool "sun50i (Allwinner A64)"
+ select ARM64
+ select SUNXI_GEN_SUN6I
+
endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
Only enable this if you really know what you are doing.
config OLD_SUNXI_KERNEL_COMPAT
- boolean "Enable workarounds for booting old kernels"
+ bool "Enable workarounds for booting old kernels"
default n
---help---
Set this to enable various workarounds for old kernels, this results in
config MMC0_CD_PIN
string "Card detect pin for mmc0"
+ default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I
default ""
---help---
Set the card detect pin for mmc0, leave empty to not use cd. This
slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
support for this.
+config INITIAL_USB_SCAN_DELAY
+ int "delay initial usb scan by x ms to allow builtin devices to init"
+ default 0
+ ---help---
+ Some boards have on board usb devices which need longer than the
+ USB spec's 1 second to connect from board powerup. Set this config
+ option to a non 0 value to add an extra delay before the first usb
+ bus scan.
+
config USB0_VBUS_PIN
string "Vbus enable pin for usb0 (otg)"
default ""
bool "Enable I2C/TWI controller 0"
default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default n if MACH_SUN6I || MACH_SUN8I
+ select CMD_I2C
---help---
This allows enabling I2C/TWI controller 0 by muxing its pins, enabling
its clock and setting up the bus. This is especially useful on devices
config I2C1_ENABLE
bool "Enable I2C/TWI controller 1"
default n
+ select CMD_I2C
---help---
See I2C0_ENABLE help text.
config I2C2_ENABLE
bool "Enable I2C/TWI controller 2"
default n
+ select CMD_I2C
---help---
See I2C0_ENABLE help text.
config I2C3_ENABLE
bool "Enable I2C/TWI controller 3"
default n
+ select CMD_I2C
---help---
See I2C0_ENABLE help text.
endif
bool "Enable the PRCM I2C/TWI controller"
# This is used for the pmic on H3
default y if SY8106A_POWER
+ select CMD_I2C
---help---
Set this to y to enable the I2C controller which is part of the PRCM.
endif
config I2C4_ENABLE
bool "Enable I2C/TWI controller 4"
default n
+ select CMD_I2C
---help---
See I2C0_ENABLE help text.
endif
config AXP_GPIO
- boolean "Enable support for gpio-s on axp PMICs"
+ bool "Enable support for gpio-s on axp PMICs"
default n
---help---
Say Y here to enable support for the gpio pins of the axp PMIC ICs.
config VIDEO
- boolean "Enable graphical uboot console on HDMI, LCD or VGA"
- depends on !MACH_SUN8I_A83T
+ bool "Enable graphical uboot console on HDMI, LCD or VGA"
+ depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I_A64
default y
---help---
Say Y here to add support for using a cfb console on the HDMI, LCD
info on how to select the video output and mode.
config VIDEO_HDMI
- boolean "HDMI output support"
+ bool "HDMI output support"
depends on VIDEO && !MACH_SUN8I
default y
---help---
Say Y here to add support for outputting video over HDMI.
config VIDEO_VGA
- boolean "VGA output support"
+ bool "VGA output support"
depends on VIDEO && (MACH_SUN4I || MACH_SUN7I)
default n
---help---
Say Y here to add support for outputting video over VGA.
config VIDEO_VGA_VIA_LCD
- boolean "VGA via LCD controller support"
+ bool "VGA via LCD controller support"
depends on VIDEO && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I)
default n
---help---
Olimex A13 boards.
config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
- boolean "Force sync active high for VGA via LCD controller support"
+ bool "Force sync active high for VGA via LCD controller support"
depends on VIDEO_VGA_VIA_LCD
default n
---help---
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
config VIDEO_COMPOSITE
- boolean "Composite video output support"
+ bool "Composite video output support"
depends on VIDEO && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
default n
---help---
bool "LCD panel needs to be configured via i2c"
depends on VIDEO
default n
+ select CMD_I2C
---help---
Say y here if the LCD panel needs to be configured via i2c. This
will add a bitbang i2c controller using gpios to talk to the LCD.