env: Rename setenv() to env_set()

[oweals/u-boot.git] / board / solidrun / mx6cuboxi / mx6cuboxi.c

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index cafa3481508474d0c0b5c4294dbeee65018d74c0..7e59fb259e118fd99400261453088d0ab7231da4 100644 (file)
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -19,10 +19,11 @@
 #include <asm/arch/iomux.h>
 #include <asm/arch/mx6-pins.h>
 #include <asm/arch/mxc_hdmi.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <asm/gpio.h>
-#include <asm/imx-common/iomux-v3.h>
-#include <asm/imx-common/video.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/sata.h>
+#include <asm/mach-imx/video.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <malloc.h>
@@ -314,6 +315,10 @@ int board_early_init_f(void)
        ret = setup_display();
 #endif
 
+#ifdef CONFIG_CMD_SATA
+       setup_sata();
+#endif
+
 #ifdef CONFIG_USB_EHCI_MX6
        setup_usb();
 #endif
@@ -371,14 +376,14 @@ int board_late_init(void)
 {
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
        if (is_hummingboard())
-               setenv("board_name", "HUMMINGBOARD");
+               env_set("board_name", "HUMMINGBOARD");
        else
-               setenv("board_name", "CUBOXI");
+               env_set("board_name", "CUBOXI");
 
        if (is_mx6dq())
-               setenv("board_rev", "MX6Q");
+               env_set("board_rev", "MX6Q");
        else
-               setenv("board_rev", "MX6DL");
+               env_set("board_rev", "MX6DL");
 #endif
 
        return 0;
@@ -605,6 +610,8 @@ static void spl_dram_init(int width)
                .sde_to_rst = 0x10,     /* 14 cycles, 200us (JEDEC default) */
                .rst_to_cke = 0x23,     /* 33 cycles, 500us (JEDEC default) */
                .ddr_type = DDR_TYPE_DDR3,
+               .refsel = 1,    /* Refresh cycles at 32KHz */
+               .refr = 7,      /* 8 refresh commands per refresh cycle */
        };
 
        if (is_mx6dq())