mx6cuboxi: customize board_boot_order to access eMMC

[oweals/u-boot.git] / board / solidrun / mx6cuboxi / mx6cuboxi.c

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index 59e8b1dca1d74bbb2cff6cca0ab657af0c6ab7f7..c531fbec71d06e8cca65fb790abb37e90e156cda 100644 (file)
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -529,6 +529,54 @@ int board_fit_config_name_match(const char *name)
        return strcmp(name, tmp_name);
 }
 
+void board_boot_order(u32 *spl_boot_list)
+{
+       struct src *psrc = (struct src *)SRC_BASE_ADDR;
+       unsigned int reg = readl(&psrc->sbmr1) >> 11;
+       u32 boot_mode = imx6_src_get_boot_mode() & IMX6_BMODE_MASK;
+       unsigned int bmode = readl(&src_base->sbmr2);
+
+       /* If bmode is serial or USB phy is active, return serial */
+       if (((bmode >> 24) & 0x03) == 0x01 || is_usbotg_phy_active()) {
+               spl_boot_list[0] = BOOT_DEVICE_BOARD;
+               return;
+       }
+
+       switch (boot_mode >> IMX6_BMODE_SHIFT) {
+       case IMX6_BMODE_SD:
+       case IMX6_BMODE_ESD:
+       case IMX6_BMODE_MMC:
+       case IMX6_BMODE_EMMC:
+               /*
+                * Upon reading BOOT_CFG register the following map is done:
+                * Bit 11 and 12 of BOOT_CFG register can determine the current
+                * mmc port
+                * 0x1                  SD2
+                * 0x2                  SD3
+                */
+
+               reg &= 0x3; /* Only care about bottom 2 bits */
+               switch (reg) {
+               case 1:
+                       SETUP_IOMUX_PADS(usdhc2_pads);
+                       spl_boot_list[0] = BOOT_DEVICE_MMC1;
+                       break;
+               case 2:
+                       SETUP_IOMUX_PADS(usdhc3_pads);
+                       spl_boot_list[0] = BOOT_DEVICE_MMC2;
+                       break;
+               }
+               break;
+       default:
+               /* By default use USB downloader */
+               spl_boot_list[0] = BOOT_DEVICE_BOARD;
+               break;
+       }
+
+       /* As a last resort, use serial downloader */
+       spl_boot_list[1] = BOOT_DEVICE_BOARD;
+}
+
 #ifdef CONFIG_SPL_BUILD
 #include <asm/arch/mx6-ddr.h>
 static const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = {