mx7ulp_evk: Use imx_ddr_size()
[oweals/u-boot.git] / board / sbc8349 / sbc8349.c
index 42f4c1ef06774506a204641e6869c689dbcb4173..a647de6b11217b0b05aa6b2741566b19df8c4215 100644 (file)
@@ -1,28 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * sbc8349.c -- WindRiver SBC8349 board support.
  * Copyright (c) 2006-2007 Wind River Systems, Inc.
  *
  * Paul Gortmaker <paul.gortmaker@windriver.com>
  * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
  */
 
 #include <common.h>
 #include <spd_sdram.h>
 #include <miiphy.h>
 #if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
+#include <linux/libfdt.h>
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int fixed_sdram(void);
 void sdram_init(void);
 
@@ -52,7 +36,7 @@ int board_early_init_f (void)
 
 #define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
 
-phys_size_t initdram (int board_type)
+int dram_init(void)
 {
        volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
        u32 msize = 0;
@@ -61,7 +45,7 @@ phys_size_t initdram (int board_type)
                return -1;
 
        /* DDR SDRAM - Main SODIMM */
-       im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
+       im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR;
 #if defined(CONFIG_SPD_EEPROM)
        msize = spd_sdram();
 #else
@@ -78,8 +62,10 @@ phys_size_t initdram (int board_type)
         */
        ddr_enable_ecc(msize * 1024 * 1024);
 #endif
-       /* return total bus SDRAM size(bytes)  -- DDR */
-       return (msize * 1024 * 1024);
+       /* set total bus SDRAM size(bytes)  -- DDR */
+       gd->ram_size = msize * 1024 * 1024;
+
+       return 0;
 }
 
 #if !defined(CONFIG_SPD_EEPROM)
@@ -93,19 +79,19 @@ int fixed_sdram(void)
        u32 ddr_size = msize << 20;     /* DDR size in bytes */
        u32 ddr_size_log2 = __ilog2(msize);
 
-       im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
+       im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000;
        im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
 
 #if (CONFIG_SYS_DDR_SIZE != 256)
 #warning Currently any ddr size other than 256 is not supported
 #endif
 
-#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
+#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0)
 #warning Chip select bounds is only configurable in 16MB increments
 #endif
        im->ddr.csbnds[2].csbnds =
-               ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
-               (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
+               ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
+               (((CONFIG_SYS_SDRAM_BASE + ddr_size - 1) >>
                                CSBNDS_EA_SHIFT) & CSBNDS_EA);
        im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
 
@@ -161,6 +147,9 @@ void sdram_init(void)
        volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
        volatile fsl_lbc_t *lbc = &immap->im_lbc;
        uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
+       const u32 lsdmr_common = LSDMR_RFEN | LSDMR_BSMA1516 | LSDMR_RFCR8 |
+                                LSDMR_PRETOACT6 | LSDMR_ACTTORW3 | LSDMR_BL8 |
+                                LSDMR_WRC3 | LSDMR_CL3;
 
        puts("\n   SDRAM on Local Bus: ");
        print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
@@ -170,22 +159,27 @@ void sdram_init(void)
         */
 
        /* setup mtrpt, lsrt and lbcr for LB bus */
-       lbc->lbcr = CONFIG_SYS_LBC_LBCR;
-       lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
-       lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+       lbc->lbcr = 0x00000000;
+       /* LB refresh timer prescal, 266MHz/32 */
+       lbc->mrtpr = 0x20000000;
+       /* LB sdram refresh timer, about 6us */
+       lbc->lsrt = 0x32000000;
        asm("sync");
 
        /*
         * Configure the SDRAM controller Machine Mode Register.
         */
-       lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
+       /* 0x40636733; normal operation */
+       lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
 
-       lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
+       /* 0x68636733; precharge all the banks */
+       lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
        asm("sync");
        *sdram_addr = 0xff;
        udelay(100);
 
-       lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
+       /* 0x48636733; auto refresh */
+       lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
        asm("sync");
        /*1 times*/
        *sdram_addr = 0xff;
@@ -213,12 +207,13 @@ void sdram_init(void)
        udelay(100);
 
        /* 0x58636733; mode register write operation */
-       lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
+       lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
        asm("sync");
        *sdram_addr = 0xff;
        udelay(100);
 
-       lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
+       /* 0x40636733; normal operation */
+       lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
        asm("sync");
        *sdram_addr = 0xff;
        udelay(100);
@@ -231,11 +226,13 @@ void sdram_init(void)
 #endif
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
 {
        ft_cpu_setup(blob, bd);
 #ifdef CONFIG_PCI
        ft_pci_setup(blob, bd);
 #endif
+
+       return 0;
 }
 #endif