ppc4xx: Add missing APC405 to MAKEALL

[oweals/u-boot.git] / board / sbc8240 / README

diff --git a/board/sbc8240/README b/board/sbc8240/README
index 703565d86c6acc7390aaf727e6a67d44379577d7..71595b4bffbed4edf9a4b62d7ca92e7160f85f4a 100644 (file)
--- a/board/sbc8240/README
+++ b/board/sbc8240/README
@@ -13,14 +13,14 @@ The supported features of the SBC8240/8245 board are:
 
 Memory Map from CPU point of view:
 
-    Start        Size   Access to
+    Start       Size   Access to
     -----------------------------------------------------
-    0x00000000   64MB   SDRAM DIMM
-    0xFF000000    4MB   On Board FLASH
-    0xFFF00000  512K    On Board FLASH or SRAM (Configured by jumper)
-    0xFFE00000    8K    EEPROM
-    0xFFE80000    8Bit  LED
-    0xFFF80000    8Bit  UART
+    0x00000000  64MB   SDRAM DIMM
+    0xFF000000   4MB   On Board FLASH
+    0xFFF00000 512K    On Board FLASH or SRAM (Configured by jumper)
+    0xFFE00000   8K    EEPROM
+    0xFFE80000   8Bit  LED
+    0xFFF80000   8Bit  UART
 
 
 Setting the board Jumpers & Switches:
@@ -30,27 +30,27 @@ Setting the board Jumpers & Switches:
 
   General Jumpers:
     ____________________________________________
-   |   Jumpers   |   Jumpers    |    Jumpers    |
+   |   Jumpers  |   Jumpers    |    Jumpers    |
    |-------------|--------------|---------------|
-   |JP1     1-2  | JP14    1-2  | JP27    1-2   |
-   |JP5     Open | JP15    1-2  | JP28    2-3   |
-   |JP8     1-2  | JP16    1-2  | JP33    Open  |
-   |JP9     1-2  | JP17    1-2  | JP37    Close |
-   |JP10    1-2  | JP18    1-2  |               |
-   |JP11    2-3  | JP19    1-2  |               |
-   |JP12    1-2  | JP20    1-2  |               |
-   |JP13    1-2  | JP25    Open |               |
+   |JP1            1-2  | JP14    1-2  | JP27    1-2   |
+   |JP5            Open | JP15    1-2  | JP28    2-3   |
+   |JP8            1-2  | JP16    1-2  | JP33    Open  |
+   |JP9            1-2  | JP17    1-2  | JP37    Close |
+   |JP10    1-2         | JP18    1-2  |               |
+   |JP11    2-3         | JP19    1-2  |               |
+   |JP12    1-2         | JP20    1-2  |               |
+   |JP13    1-2         | JP25    Open |               |
    |_____________|______________|_______________|
 
   Bus speed Jumpers:
     _________________________
    | 100MHz Bus | 66 MHz Bus |
    |------------|------------|
-   | JP2    1-2 | JP2    1-2 |
-   | JP3    1-2 | JP3    2-3 |
-   | JP4    1-2 | JP4    2-3 |
-   | JP6    1-2 | JP6    2-3 |
-   | JP7    1-2 | JP7    1-2 |
+   | JP2    1-2 | JP2   1-2 |
+   | JP3    1-2 | JP3   2-3 |
+   | JP4    1-2 | JP4   2-3 |
+   | JP6    1-2 | JP6   2-3 |
+   | JP7    1-2 | JP7   1-2 |
    |____________|____________|
 
 
@@ -60,7 +60,7 @@ CPU:   MPC8240 Revision 1.1 at 247.500 MHz: 16 kB I-Cache 16 kB D-Cache
 Board: sbc8240 Revision 255 Local Bus at 99 MHz
 DRAM:  64 MB
 FLASH: 512 kB
-        00  11  8086  1229  0200  00
+       00  11  8086  1229  0200  00
 In:    serial
 Out:   serial
 Err:   serial
@@ -101,8 +101,8 @@ TFTP from server 192.168.193.99; our IP address is 192.168.193.102
 Filename 'vxWorks.st'.
 Load address: 0x1000000
 Loading: #################################################################
-         #################################################################
-         ##############################################################
+        #################################################################
+        ##############################################################
 done
 Bytes transferred = 979927 (ef3d7 hex)
 ## Ethernet MAC address not copied to NV RAM
@@ -118,23 +118,23 @@ Adding 2845 symbols for standalone.
  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
-      ]]]]]]]]]]]  ]]]]     ]]]]]]]]]]       ]]              ]]]]         (R)
- ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]       ]]               ]]]]
- ]]     ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]                ]]]]
- ]]]     ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]   ]]]]]
- ]]]]     ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]   ]]]]
- ]]]]]     ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]    ]]]]
- ]]]]]]      ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]    ]]]]
- ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]] ]]]]    ]]]]
- ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]] ]]]]]
+      ]]]]]]]]]]]  ]]]]            ]]]]]]]]]]       ]]              ]]]]         (R)
+ ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]      ]]               ]]]]
+ ]]    ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]                ]]]]
+ ]]]    ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]   ]]]]]
+ ]]]]    ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]   ]]]]
+ ]]]]]    ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]    ]]]]
+ ]]]]]]             ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]    ]]]]
+ ]]]]]]]    ]]]]]  ]   ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]] ]]]]    ]]]]
+ ]]]]]]]]  ]]]]]  ]]]   ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]] ]]]]]
  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
- ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]       Development System
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]      Development System
  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
- ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks version 5.5.1
- ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.6
- ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc., 1984-2003
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]      VxWorks version 5.5.1
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]      KERNEL: WIND version 2.6
+ ]]]]]]]]]]]]]]]]]]]]]]]]]      Copyright Wind River Systems, Inc., 1984-2003
 
-                               CPU: MPC8240 -- Wind River BSP. SBC8240 Board.  Processor #0.
-                              Memory Size: 0x2000000.  BSP version 1.2/28.
+                              CPU: MPC8240 -- Wind River BSP. SBC8240 Board.  Processor #0.
+                             Memory Size: 0x2000000.  BSP version 1.2/28.
 
 ->