arm: Remove omap3_pandora_defconfig board

[oweals/u-boot.git] / board / pandora / pandora.c

diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c
deleted file mode 100644 (file)
index a938486..0000000
--- a/board/pandora/pandora.c
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2008
- * Grazvydas Ignotas <notasas@gmail.com>
- *
- * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
- *     Richard Woodruff <r-woodruff2@ti.com>
- *     Syed Mohammed Khasim <khasim@ti.com>
- *     Sunil Kumar <sunilsaini05@gmail.com>
- *     Shashi Ranjan <shashiranjanmca05@gmail.com>
- *
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- */
-#include <common.h>
-#include <dm.h>
-#include <init.h>
-#include <ns16550.h>
-#include <twl4030.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-types.h>
-#include <linux/delay.h>
-#include "pandora.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define TWL4030_BB_CFG_BBCHEN          (1 << 4)
-#define TWL4030_BB_CFG_BBSEL_3200MV    (3 << 2)
-#define TWL4030_BB_CFG_BBISEL_500UA    2
-
-#define CONTROL_WKUP_CTRL              0x48002a5c
-#define GPIO_IO_PWRDNZ                 (1 << 6)
-#define PBIASLITEVMODE1                        (1 << 8)
-
-static const struct ns16550_platdata pandora_serial = {
-       .base = OMAP34XX_UART3,
-       .reg_shift = 2,
-       .clock = V_NS16550_CLK,
-       .fcr = UART_FCR_DEFVAL,
-};
-
-U_BOOT_DEVICE(pandora_uart) = {
-       "ns16550_serial",
-       &pandora_serial
-};
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-       gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-       /* board id for Linux */
-       gd->bd->bi_arch_number = MACH_TYPE_OMAP3_PANDORA;
-       /* boot param addr */
-       gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-       return 0;
-}
-
-static void set_output_gpio(unsigned int gpio, int value)
-{
-       int ret;
-
-       ret = gpio_request(gpio, "");
-       if (ret != 0) {
-               printf("could not request GPIO %u\n", gpio);
-               return;
-       }
-       ret = gpio_direction_output(gpio, value);
-       if (ret != 0)
-               printf("could not set GPIO %u to %d\n", gpio, value);
-}
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
-       t2_t *t2_base = (t2_t *)T2_BASE;
-       u32 pbias_lite;
-
-       twl4030_led_init(TWL4030_LED_LEDEN_LEDBON);
-
-       /* set up dual-voltage GPIOs to 1.8V */
-       pbias_lite = readl(&t2_base->pbias_lite);
-       pbias_lite &= ~PBIASLITEVMODE1;
-       pbias_lite |= PBIASLITEPWRDNZ1;
-       writel(pbias_lite, &t2_base->pbias_lite);
-       if (get_cpu_family() == CPU_OMAP36XX)
-               writel(readl(CONTROL_WKUP_CTRL) | GPIO_IO_PWRDNZ,
-                       CONTROL_WKUP_CTRL);
-
-       /* make sure audio and BT chips are in powerdown state */
-       set_output_gpio(14, 0);
-       set_output_gpio(15, 0);
-       set_output_gpio(118, 0);
-
-       /* enable USB supply */
-       set_output_gpio(164, 1);
-
-       /* wifi needs a short pulse to enter powersave state */
-       set_output_gpio(23, 1);
-       udelay(5000);
-       gpio_direction_output(23, 0);
-
-       /* Enable battery backup capacitor (3.2V, 0.5mA charge current) */
-       twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
-               TWL4030_PM_RECEIVER_BB_CFG,
-               TWL4030_BB_CFG_BBCHEN | TWL4030_BB_CFG_BBSEL_3200MV |
-               TWL4030_BB_CFG_BBISEL_500UA);
-
-       omap_die_id_display();
-
-       return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *             hardware. Many pins need to be moved from protect to primary
- *             mode.
- */
-void set_muxconf_regs(void)
-{
-       MUX_PANDORA();
-       if (get_cpu_family() == CPU_OMAP36XX) {
-               MUX_PANDORA_3730();
-       }
-}
-
-#ifdef CONFIG_MMC
-int board_mmc_init(bd_t *bis)
-{
-       return omap_mmc_init(0, 0, 0, -1, -1);
-}
-
-void board_mmc_power_init(void)
-{
-       twl4030_power_mmc_init(0);
-}
-#endif