serial: Remove CONFIG_SERIAL_MULTI from serial drivers

[oweals/u-boot.git] / board / overo / overo.h

diff --git a/board/overo/overo.h b/board/overo/overo.h
index d394f902a169e37b6a27c1056221f97bea61b742..b41b628899eebb0d98c9ea91b11cf8c5cce2648d 100644 (file)
--- a/board/overo/overo.h
+++ b/board/overo/overo.h
@@ -33,6 +33,11 @@ const omap3_sysinfo sysinfo = {
 #endif
 };
 
+/* overo revisions */
+#define REVISION_0     0x0
+#define REVISION_1     0x1
+#define REVISION_2     0x2
+
 /*
  * IEN  - Input Enable
  * IDIS - Input Disable
@@ -160,10 +165,10 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(DSS_DATA22),         (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
        MUX_VAL(CP(DSS_DATA23),         (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
  /*CAMERA*/\
-       MUX_VAL(CP(CAM_HS),             (IEN  | PTU | EN  | M0)) /*CAM_HS */\
-       MUX_VAL(CP(CAM_VS),             (IEN  | PTU | EN  | M0)) /*CAM_VS */\
+       MUX_VAL(CP(CAM_HS),             (IEN  | PTU | DIS | M0)) /*CAM_HS */\
+       MUX_VAL(CP(CAM_VS),             (IEN  | PTU | DIS | M0)) /*CAM_VS */\
        MUX_VAL(CP(CAM_XCLKA),          (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
-       MUX_VAL(CP(CAM_PCLK),           (IEN  | PTU | EN  | M0)) /*CAM_PCLK*/\
+       MUX_VAL(CP(CAM_PCLK),           (IEN  | PTU | DIS | M0)) /*CAM_PCLK*/\
        MUX_VAL(CP(CAM_FLD),            (IDIS | PTD | DIS | M4)) /*CAM_FLD*/\
        MUX_VAL(CP(CAM_D0),             (IEN  | PTD | DIS | M0)) /*CAM_D0*/\
        MUX_VAL(CP(CAM_D1),             (IEN  | PTD | DIS | M0)) /*CAM_D1*/\
@@ -290,7 +295,7 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(SYS_BOOT5),          (IEN  | PTD | DIS | M4)) /*GPIO_7*/\
        MUX_VAL(CP(SYS_BOOT6),          (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
        MUX_VAL(CP(SYS_OFF_MODE),       (IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
-       MUX_VAL(CP(SYS_CLKOUT1),        (IEN  | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
+       MUX_VAL(CP(SYS_CLKOUT1),        (IEN  | PTU | EN  | M4)) /*GPIO_10*/\
        MUX_VAL(CP(SYS_CLKOUT2),        (IEN  | PTU | EN  | M4)) /*GPIO_186*/\
        MUX_VAL(CP(ETK_CLK_ES2),        (IEN  | PTU | EN  | M2)) /*MMC3_CLK*/\
        MUX_VAL(CP(ETK_CTL_ES2),        (IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\