#include <netdev.h>
#include <twl4030.h>
#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/gpio.h>
+#include <asm/arch/omap_gpmc.h>
+#include <asm/gpio.h>
#include <asm/mach-types.h>
#include "overo.h"
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TWL4030_I2C_BUS 0
+#define EXPANSION_EEPROM_I2C_BUS 2
+#define EXPANSION_EEPROM_I2C_ADDRESS 0x51
+
+#define GUMSTIX_SUMMIT 0x01000200
+#define GUMSTIX_TOBI 0x02000200
+#define GUMSTIX_TOBI_DUO 0x03000200
+#define GUMSTIX_PALO35 0x04000200
+#define GUMSTIX_PALO43 0x05000200
+#define GUMSTIX_CHESTNUT43 0x06000200
+#define GUMSTIX_PINTO 0x07000200
+#define GUMSTIX_GALLOP43 0x08000200
+
+#define ETTUS_USRP_E 0x01000300
+
+#define GUMSTIX_NO_EEPROM 0xffffffff
+
+static struct {
+ unsigned int device_vendor;
+ unsigned char revision;
+ unsigned char content;
+ char fab_revision[8];
+ char env_var[16];
+ char env_setting[64];
+} expansion_config;
+
#if defined(CONFIG_CMD_NET)
static void setup_net_chip(void);
#endif
*/
int board_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_OVERO;
{
int revision;
- if (!omap_request_gpio(112) &&
- !omap_request_gpio(113) &&
- !omap_request_gpio(115)) {
+ if (!gpio_request(112, "") &&
+ !gpio_request(113, "") &&
+ !gpio_request(115, "")) {
- omap_set_gpio_direction(112, 1);
- omap_set_gpio_direction(113, 1);
- omap_set_gpio_direction(115, 1);
+ gpio_direction_input(112);
+ gpio_direction_input(113);
+ gpio_direction_input(115);
- revision = omap_get_gpio_datain(115) << 2 |
- omap_get_gpio_datain(113) << 1 |
- omap_get_gpio_datain(112);
+ revision = gpio_get_value(115) << 2 |
+ gpio_get_value(113) << 1 |
+ gpio_get_value(112);
- omap_free_gpio(112);
- omap_free_gpio(113);
- omap_free_gpio(115);
+ gpio_free(112);
+ gpio_free(113);
+ gpio_free(115);
} else {
printf("Error: unable to acquire board revision GPIOs\n");
revision = -1;
return revision;
}
+/*
+ * Routine: get_sdio2_config
+ * Description: Return information about the wifi module connection
+ * Returns 0 if the module connects though a level translator
+ * Returns 1 if the module connects directly
+ */
+int get_sdio2_config(void)
+{
+ int sdio_direct;
+
+ if (!gpio_request(130, "") && !gpio_request(139, "")) {
+
+ gpio_direction_output(130, 0);
+ gpio_direction_input(139);
+
+ sdio_direct = 1;
+ gpio_set_value(130, 0);
+ if (gpio_get_value(139) == 0) {
+ gpio_set_value(130, 1);
+ if (gpio_get_value(139) == 1)
+ sdio_direct = 0;
+ }
+
+ gpio_free(130);
+ gpio_free(139);
+ } else {
+ printf("Error: unable to acquire sdio2 clk GPIOs\n");
+ sdio_direct = -1;
+ }
+
+ return sdio_direct;
+}
+
+/*
+ * Routine: get_expansion_id
+ * Description: This function checks for expansion board by checking I2C
+ * bus 2 for the availability of an AT24C01B serial EEPROM.
+ * returns the device_vendor field from the EEPROM
+ */
+unsigned int get_expansion_id(void)
+{
+ i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
+
+ /* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */
+ if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
+ i2c_set_bus_num(TWL4030_I2C_BUS);
+ return GUMSTIX_NO_EEPROM;
+ }
+
+ /* read configuration data */
+ i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
+ sizeof(expansion_config));
+
+ i2c_set_bus_num(TWL4030_I2C_BUS);
+
+ return expansion_config.device_vendor;
+}
+
/*
* Routine: misc_init_r
* Description: Configure board specific parts
#endif
printf("Board revision: %d\n", get_board_revision());
+
+ switch (get_sdio2_config()) {
+ case 0:
+ printf("Tranceiver detected on mmc2\n");
+ MUX_OVERO_SDIO2_TRANSCEIVER();
+ break;
+ case 1:
+ printf("Direct connection on mmc2\n");
+ MUX_OVERO_SDIO2_DIRECT();
+ break;
+ default:
+ printf("Unable to detect mmc2 connection type\n");
+ }
+
+ switch (get_expansion_id()) {
+ case GUMSTIX_SUMMIT:
+ printf("Recognized Summit expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "dvi");
+ break;
+ case GUMSTIX_TOBI:
+ printf("Recognized Tobi expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "dvi");
+ break;
+ case GUMSTIX_TOBI_DUO:
+ printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ break;
+ case GUMSTIX_PALO35:
+ printf("Recognized Palo35 expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "lcd35");
+ break;
+ case GUMSTIX_PALO43:
+ printf("Recognized Palo43 expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "lcd43");
+ break;
+ case GUMSTIX_CHESTNUT43:
+ printf("Recognized Chestnut43 expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "lcd43");
+ break;
+ case GUMSTIX_PINTO:
+ printf("Recognized Pinto expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ break;
+ case GUMSTIX_GALLOP43:
+ printf("Recognized Gallop43 expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "lcd43");
+ break;
+ case ETTUS_USRP_E:
+ printf("Recognized Ettus Research USRP-E (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ MUX_USRP_E();
+ setenv("defaultdisplay", "dvi");
+ break;
+ case GUMSTIX_NO_EEPROM:
+ printf("No EEPROM on expansion board\n");
+ break;
+ default:
+ printf("Unrecognized expansion board\n");
+ }
+
+ if (expansion_config.content == 1)
+ setenv(expansion_config.env_var, expansion_config.env_setting);
+
dieid_num_r();
return 0;
&ctrl_base->gpmc_nadv_ale);
/* Make GPIO 64 as output pin and send a magic pulse through it */
- if (!omap_request_gpio(64)) {
- omap_set_gpio_direction(64, 0);
- omap_set_gpio_dataout(64, 1);
+ if (!gpio_request(64, "")) {
+ gpio_direction_output(64, 0);
+ gpio_set_value(64, 1);
udelay(1);
- omap_set_gpio_dataout(64, 0);
+ gpio_set_value(64, 0);
udelay(1);
- omap_set_gpio_dataout(64, 1);
+ gpio_set_value(64, 1);
}
}
#endif
#endif
return rc;
}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif