Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

[oweals/u-boot.git] / board / nvidia / common / board.c

diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index dc301e741bbb20e4766c85638b58598fca1facff..f60f21f39f1103517bdd5c70d7d63e53a5105ac1 100644 (file)
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -26,19 +26,35 @@
 #include <linux/compiler.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
-#include <asm/arch/emc.h>
+#ifdef CONFIG_LCD
+#include <asm/arch/display.h>
+#endif
+#include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/pmu.h>
+#ifdef CONFIG_PWM_TEGRA
+#include <asm/arch/pwm.h>
+#endif
 #include <asm/arch/tegra.h>
-#include <asm/arch/usb.h>
 #include <asm/arch-tegra/board.h>
 #include <asm/arch-tegra/clk_rst.h>
 #include <asm/arch-tegra/pmc.h>
 #include <asm/arch-tegra/sys_proto.h>
 #include <asm/arch-tegra/uart.h>
 #include <asm/arch-tegra/warmboot.h>
-#include <spi.h>
+#ifdef CONFIG_TEGRA_CLOCK_SCALING
+#include <asm/arch/emc.h>
+#endif
+#ifdef CONFIG_USB_EHCI_TEGRA
+#include <asm/arch-tegra/usb.h>
+#include <asm/arch/usb.h>
+#endif
+#ifdef CONFIG_TEGRA_MMC
+#include <asm/arch-tegra/tegra_mmc.h>
+#include <asm/arch-tegra/mmc.h>
+#endif
 #include <i2c.h>
+#include <spi.h>
 #include "emc.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -77,6 +93,19 @@ void __gpio_early_init_uart(void)
 void gpio_early_init_uart(void)
 __attribute__((weak, alias("__gpio_early_init_uart")));
 
+void __pin_mux_nand(void)
+{
+       funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_DEFAULT);
+}
+
+void pin_mux_nand(void) __attribute__((weak, alias("__pin_mux_nand")));
+
+void __pin_mux_display(void)
+{
+}
+
+void pin_mux_display(void) __attribute__((weak, alias("__pin_mux_display")));
+
 /*
  * Routine: power_det_init
  * Description: turn off power detects
@@ -104,13 +133,19 @@ int board_init(void)
        clock_init();
        clock_verify();
 
-#ifdef CONFIG_SPI_UART_SWITCH
-       gpio_config_uart();
-#endif
-#ifdef CONFIG_TEGRA_SPI
+#ifdef CONFIG_FDT_SPI
        pin_mux_spi();
        spi_init();
 #endif
+
+#ifdef CONFIG_PWM_TEGRA
+       if (pwm_init(gd->fdt_blob))
+               debug("%s: Failed to init pwm\n", __func__);
+#endif
+#ifdef CONFIG_LCD
+       pin_mux_display();
+       tegra_lcd_check_next_stage(gd->fdt_blob, 0);
+#endif
        /* boot param addr */
        gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
 
@@ -136,6 +171,13 @@ int board_init(void)
        pin_mux_usb();
        board_usb_init(gd->fdt_blob);
 #endif
+#ifdef CONFIG_LCD
+       tegra_lcd_check_next_stage(gd->fdt_blob, 0);
+#endif
+
+#ifdef CONFIG_TEGRA_NAND
+       pin_mux_nand();
+#endif
 
 #ifdef CONFIG_TEGRA_LP0
        /* save Sdram params to PMC 2, 4, and 24 for WB0 */
@@ -157,12 +199,77 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init")));
 
 int board_early_init_f(void)
 {
+#if !defined(CONFIG_TEGRA20)
+       pinmux_init();
+#endif
        board_init_uart_f();
 
        /* Initialize periph GPIOs */
        gpio_early_init();
        gpio_early_init_uart();
+#ifdef CONFIG_LCD
+       tegra_lcd_early_init(gd->fdt_blob);
+#endif
 
        return 0;
 }
 #endif /* EARLY_INIT */
+
+int board_late_init(void)
+{
+#ifdef CONFIG_LCD
+       /* Make sure we finish initing the LCD */
+       tegra_lcd_check_next_stage(gd->fdt_blob, 1);
+#endif
+       return 0;
+}
+
+#if defined(CONFIG_TEGRA_MMC)
+void __pin_mux_mmc(void)
+{
+}
+
+void pin_mux_mmc(void) __attribute__((weak, alias("__pin_mux_mmc")));
+
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+       debug("%s called\n", __func__);
+
+       /* Enable muxes, etc. for SDMMC controllers */
+       pin_mux_mmc();
+
+       debug("%s: init MMC\n", __func__);
+       tegra_mmc_init();
+
+       return 0;
+}
+
+void pad_init_mmc(struct mmc_host *host)
+{
+#if defined(CONFIG_TEGRA30)
+       enum periph_id id = host->mmc_id;
+       u32 val;
+
+       debug("%s: sdmmc address = %08x, id = %d\n", __func__,
+               (unsigned int)host->reg, id);
+
+       /* Set the pad drive strength for SDMMC1 or 3 only */
+       if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) {
+               debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
+                       __func__);
+               return;
+       }
+
+       val = readl(&host->reg->sdmemcmppadctl);
+       val &= 0xFFFFFFF0;
+       val |= MEMCOMP_PADCTRL_VREF;
+       writel(val, &host->reg->sdmemcmppadctl);
+
+       val = readl(&host->reg->autocalcfg);
+       val &= 0xFFFF0000;
+       val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED;
+       writel(val, &host->reg->autocalcfg);
+#endif /* T30 */
+}
+#endif /* MMC */